Algorithm used when computing Fibre Channel
World Wide Node Name for each port. If the
value is sameForEachPort(0), then the World
Wide Node Name is the same for each port and
computed based on the World Wide Node Name of
the gateway. If the value is differentForEachPort(1),
then the World Wide Node Name is different for
each port, computed based on the World Wide
Port Name for that port.
Parsed from file SANMgr.mib.txt
Company: None
Module: SANMgrV1-MIB
Algorithm used when computing Fibre Channel
World Wide Node Name for each port. If the
value is sameForEachPort(0), then the World
Wide Node Name is the same for each port and
computed based on the World Wide Node Name of
the gateway. If the value is differentForEachPort(1),
then the World Wide Node Name is different for
each port, computed based on the World Wide
Port Name for that port.
Parsed from file SANMgrV1-MIB.mib
Module: SANMgrV1-MIB
Vendor: Pathlight Technology Inc.
Module: SANMgrV1-MIB
[Automatically extracted from oidview.com]
paSysNodeNameMode OBJECT-TYPE SYNTAX INTEGER { sameForEachPort(0), differentForEachPort(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Algorithm used when computing Fibre Channel World Wide Node Name for each port. If the value is sameForEachPort(0), then the World Wide Node Name is the same for each port and computed based on the World Wide Node Name of the gateway. If the value is differentForEachPort(1), then the World Wide Node Name is different for each port, computed based on the World Wide Port Name for that port." ::= { agent 39 }
paSysNodeNameMode OBJECT-TYPE SYNTAX INTEGER { sameForEachPort(0), differentForEachPort(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Algorithm used when computing Fibre Channel World Wide Node Name for each port. If the value is sameForEachPort(0), then the World Wide Node Name is the same for each port and computed based on the World Wide Node Name of the gateway. If the value is differentForEachPort(1), then the World Wide Node Name is different for each port, computed based on the World Wide Port Name for that port." ::= { agent 39 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2935.2.39.0 | paSysNodeNameMode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2935.2.1 | paIdentify | 1 | 1 | Flash the READY light on the SAN Data Gateway front panel. A non-zero value turns the LED on for the specified number of seconds. … |
| 1.3.6.1.4.1.2935.2.2 | paReboot | 1 | 1 | Writing a reboot(2) value here causes immediate reboot. |
| 1.3.6.1.4.1.2935.2.3 | paHealthCheckValue | 1 | 1 | Value in percent of health check tests passed. |
| 1.3.6.1.4.1.2935.2.4 | paHealthCheckLevel | 1 | 1 | Scrutiny level of health check function. |
| 1.3.6.1.4.1.2935.2.5 | paHealthCheckInterval | 1 | 1 | Health Check interval in minutes. |
| 1.3.6.1.4.1.2935.2.6 | paEvRptLevel | 1 | 1 | Used when retrieving Event Log. Events with log level greater than paEvRptLevel are not retrieved. |
| 1.3.6.1.4.1.2935.2.7 | paEventLogLevels | 1 | 1 | Each of 255 event types has an 8-bit level used when reading log. Currently valid LogLevel range is 0-3. |
| 1.3.6.1.4.1.2935.2.8 | paTrapThresholds | 1 | 1 | Each of 255 event types has an 8-bit threshold. When the number of events exceeds the Trap Threshold, a trap is generated and sen… |
| 1.3.6.1.4.1.2935.2.9 | paBaudRate | 1 | 1 | Serial baud rate for SAN Gateway Service Port. Currently, the Agent does not support baud rate change: the rate is hard-coded to … |
| 1.3.6.1.4.1.2935.2.10 | paEventLog | 1 | 8 | Entry point for the Agent Event Log Table. |
| 1.3.6.1.4.1.2935.2.11 | paLogSize | 1 | 1 | Number of records in entire event log. (Not just current records since boot.) |
| 1.3.6.1.4.1.2935.2.12 | paCommand | 1 | 1 | Used for issuing command to SNMP agent. |
| 1.3.6.1.4.1.2935.2.13 | paLogBoot | 1 | 1 | Absolute index of first log entry at boot. |
| 1.3.6.1.4.1.2935.2.14 | paLogNCurrent | 1 | 1 | SNMP Get (read) returns number of records since boot subject to viewing level filtering. SNMP Set (write) copies this number of r… |
| 1.3.6.1.4.1.2935.2.15 | paLogChronFirst | 1 | 1 | Used to request range of records from paLogChronFirst to paLogChronLast |
| 1.3.6.1.4.1.2935.2.16 | paLogChronLast | 1 | 1 | Used to request range of records from paLogChronFirst to paLogChronLast |
| 1.3.6.1.4.1.2935.2.17 | paLogScroll | 1 | 1 | Used to request previous/next range of records event log |
| 1.3.6.1.4.1.2935.2.18 | paLogFilename | 1 | 1 | Used to save event log to a file. |
| 1.3.6.1.4.1.2935.2.19 | paEnvironmentState | 1 | 1 | Temperature and Voltage Status of SAN Data Gateway: ********************************** (LSB) bit 0 Auxiliary Power bit 1 Main Pow… |
| 1.3.6.1.4.1.2935.2.20 | paGatewayFWRev | 1 | 1 | SAN Data Gateway Firmware Revision information. |
| 1.3.6.1.4.1.2935.2.21 | paGatewayHWRev | 1 | 1 | SAN Data Gateway Hardware Revision information. |
| 1.3.6.1.4.1.2935.2.22 | paSnmpFWRev | 1 | 1 | SNMP Agent Firmware Revision information. |
| 1.3.6.1.4.1.2935.2.23 | paRidTag | 1 | 1 | SAN Data Gateway RIDTag. |
| 1.3.6.1.4.1.2935.2.24 | paSerialNumber | 1 | 1 | SAN Data Gateway Serial Number. |
| 1.3.6.1.4.1.2935.2.25 | paServerVersion | 1 | 1 | Remote Management software writes Server version information here to customize SNMP Agent behavior. |
| 1.3.6.1.4.1.2935.2.26 | paProductType | 1 | 1 | Type of SAN device |
| 1.3.6.1.4.1.2935.2.27 | paVPSEnabled | 1 | 1 | State of ITL Access Control enable. |
| 1.3.6.1.4.1.2935.2.28 | paLicenseKey | 1 | 1 | Used to pass feature enabling license keys. |
| 1.3.6.1.4.1.2935.2.29 | paThirdPartyCopyEnabled | 1 | 1 | State of Extended 3rd Party Copy enable. Enabled means that a valid license key has been entered for this feature. |
| 1.3.6.1.4.1.2935.2.30 | paVPSStatus | 1 | 1 | State of Virtual Private SAN feature. bit 0 : active or inactive. bit 1 : licensed or not licensed. Bit 1 is redundant with MIB … |
| 1.3.6.1.4.1.2935.2.31 | paThirdPartyCopyStatus | 1 | 1 | State of Extended 3rd Party Copy feature. bit 0 : active or inactive. bit 1 : licensed or not licensed. Bit 1 is redundant with … |
| 1.3.6.1.4.1.2935.2.32 | paCommandControlLUN | 1 | 1 | Gateway/Router Command and Control LUN |
| 1.3.6.1.4.1.2935.2.33 | paSanDirectorEnabled | 1 | 1 | State of SAN Director Support for this device. To enable, user must write a valid license key to OID paLicenseKey or enter the li… |
| 1.3.6.1.4.1.2935.2.34 | paNodeName | 1 | 1 | SAN Gateway Node Name. |
| 1.3.6.1.4.1.2935.2.35 | paVPMStatus | 1 | 1 | State of Virtual Private Map feature. bit 0 : active or inactive. bit 1 : licensed or not licensed. |
| 1.3.6.1.4.1.2935.2.36 | paSRSStatus | 1 | 1 | State of SAN Replication Services feature. bit 0 : active or inactive. bit 1 : licensed or not licensed. |
| 1.3.6.1.4.1.2935.2.37 | paEthernetType | 1 | 1 | Current Ethernet Speed. |
| 1.3.6.1.4.1.2935.2.38 | paTrapSequenceNumber | 1 | 1 | Sequence number of last trap sent by this SNMP Agent. |