The current loopback state of the SONET/SDH interface.
The values mean:
noLoop
Not in the loopback state. A device that is not
capable of performing a loopback on this interface
shall always return this value.
facilityLoop
The received signal at this interface is looped back
out through the corresponding transmitter in the return
direction.
terminalLoop
The signal that is about to be transmitted is connected
to the associated incoming receiver.
Parsed from file orion_mib_v31.txt
Company: None
Module: COSINE-ORION-MIB
Vendor: Cosine Communications
Module: COSINE-ORION-MIB
[Automatically extracted from oidview.com]
csOc3Loopback OBJECT-TYPE SYNTAX INTEGER { noLoop (1), facilityLoop (2), terminalLoop (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The current loopback state of the SONET/SDH interface. The values mean: noLoop Not in the loopback state. A device that is not capable of performing a loopback on this interface shall always return this value. facilityLoop The received signal at this interface is looped back out through the corresponding transmitter in the return direction. terminalLoop The signal that is about to be transmitted is connected to the associated incoming receiver." DEFVAL { noLoop } ::= { csOc3ConfigEntry 17 }
csOc3AlarmControl OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "" DEFVAL { enable } ::= { csOc3ConfigEntry 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.1 | csOc3SlotIndex | 0 | 0 | This object identifies the blade to which this OC3 Port is attached. Together with csOc3ModuleIndex, csOc3PortIndex, it uniquel… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.2 | csOc3PortIndex, csOc3ModuleIndex | 0 | 0 | This object identifies the module on the OC3 blade |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.3 | csOc3ClockSource, csOc3PortIndex | 0 | 0 | This object identifies the source of the clock signal for this OC3 port. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.4 | csOc3CrcType, csOc3ClockSource | 0 | 0 | This object identifies the source of the clock signal for this OC3 port. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.5 | csOc3SectionJ0, csOc3CrcType | 0 | 0 | This object identifies the type of CRC used on this OC3 port. This is only used by Packet Over Sonet. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.6 | csOc3LineS1S0, csOc3SectionJ0 | 0 | 0 | This object identifies the payload pointer byte (s1s0) used on this OC3 port. If this object is set to oc3c(1), the value sent w… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.7 | csOc3PathC2, csOc3LineS1S0 | 0 | 0 | This object identifies the payload pointer byte (s1s0) used on this OC3 port. If this object is set to oc3c(1), the value sent w… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.8 | csOc3PathJ1, csOc3PathC2 | 0 | 0 | This object is the path trace sent in the J1 byte of path overhead. It is padded by the OC3 driver with 64-b… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.9 | csOc3FarEndJ1, csOc3PathJ1 | 0 | 0 | The expected path trace of the far end interface. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.10 | csOc3Scramble, csOc3FarEndJ1 | 0 | 0 | The expected path trace of the far end interface. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.11 | csOc3NearEndPerfMonControl, csOc3Scramble | 0 | 0 | This object controls the scrambling feature on this OC3 port. If this object is enabled, the SPE payload will be scrambled. If t… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.12 | csOc3FarEndPerfMonControl, csOc3NearEndPerfMonControl | 0 | 0 | None |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.13 | csOc3ApsControl, csOc3FarEndPerfMonControl | 0 | 0 | None |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.14 | csOc3ApsForce, csOc3ApsControl | 0 | 0 | Force protection switch. When set to 'forceToSwitch' it switches the active port between the two internal ports indicated by csO… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.15 | csOc3ApsActivePort, csOc3ApsForce | 0 | 0 | This object indicates which of the internal port is currently active. The non-active one is used for protection. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.16 | csOc3AlarmControl, csOc3ApsActivePort | 0 | 0 | This object indicates which of the internal port is currently active. The non-active one is used for protection. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.18 | csOc3AdminStatus, csOc3Loopback | 0 | 0 | This object is used to enable/disable this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.19 | csOc3OperStatus, csOc3AdminStatus | 0 | 0 | This object is used to enable/disable this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.20 | csOc3TimeElapsed, csOc3OperStatus | 0 | 0 | This object indicates the current operational status of this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.21 | csOc3ValidIntervals, csOc3TimeElapsed | 0 | 0 | This object indicates the number of previous 15-minute intervals for which data was collected. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.22 | csOc3InvalidIntervals, csOc3ValidIntervals | 0 | 0 | This object indicates the number of previous 15-minute intervals for which data was collected. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.23 | csOc3PosEncapType, csOc3InvalidIntervals | 0 | 0 | This object indicates the number of previous 15-minute intervals for which data was not able to be collected. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.24 | csOc3PosEmptyCellType, csOc3PosEncapType | 0 | 0 | This object is used to select the type of empty cell to be transmitted. It is deprecated due to not being supported in POS. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.25 | csOc3PosMaxPacketSize, csOc3PosEmptyCellType | 0 | 0 | This object specifies the maximum packet size required for this port. This object applies to POS only. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.26 | csOc3PosOperStatus, csOc3PosMaxPacketSize | 0 | 0 | This object specifies the maximum packet size required for this port. This object applies to POS only. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.27 | csOc3MediumLineType, csOc3PosOperStatus | 0 | 0 | This object indicates the current operational status of this channel. It is deprecated in favor of using csOc3AdminStatus instead. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.28 | csOc3ReceivedPathJ1, csOc3MediumLineType | 0 | 0 | The actual received path trace of the far end interface. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.29 | csOc3ReceivedPathJ1 | 0 | 0 | The actual received path trace of the far end interface. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.30 | csOcNSpeed | 0 | 0 | The speed of OCn interface. |