This object identifies the source of the clock signal for
this OC3 port.
Parsed from file orion_mib_v31.txt
Company: None
Module: COSINE-ORION-MIB
This object identifies the location of the OC3 Port on the
blade identified by csOc3SlotIndex, csOc3ModuleIndex. Together with
csOc3SlotIndex, it uniquely identifies a physical port.
Parsed from file COSINE-ORION-MIB.mib
Module: COSINE-ORION-MIB
Vendor: Cosine Communications
Module: COSINE-ORION-MIB
[Automatically extracted from oidview.com]
csOc3ClockSource OBJECT-TYPE SYNTAX INTEGER { internal (1), line (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the source of the clock signal for this OC3 port." DEFVAL { internal } ::= { csOc3ConfigEntry 3 }
csOc3PortIndex OBJECT-TYPE SYNTAX Integer32 (1..'7fffffff'h) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object identifies the location of the OC3 Port on the blade identified by csOc3SlotIndex, csOc3ModuleIndex. Together with csOc3SlotIndex, it uniquely identifies a physical port." ::= { csOc3ConfigEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.1 | csOc3SlotIndex | 0 | 0 | This object identifies the blade to which this OC3 Port is attached. Together with csOc3ModuleIndex, csOc3PortIndex, it uniquel… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.2 | csOc3PortIndex, csOc3ModuleIndex | 0 | 0 | This object identifies the module on the OC3 blade |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.4 | csOc3CrcType, csOc3ClockSource | 0 | 0 | This object identifies the source of the clock signal for this OC3 port. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.5 | csOc3SectionJ0, csOc3CrcType | 0 | 0 | This object identifies the type of CRC used on this OC3 port. This is only used by Packet Over Sonet. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.6 | csOc3LineS1S0, csOc3SectionJ0 | 0 | 0 | This object identifies the payload pointer byte (s1s0) used on this OC3 port. If this object is set to oc3c(1), the value sent w… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.7 | csOc3PathC2, csOc3LineS1S0 | 0 | 0 | This object identifies the payload pointer byte (s1s0) used on this OC3 port. If this object is set to oc3c(1), the value sent w… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.8 | csOc3PathJ1, csOc3PathC2 | 0 | 0 | This object is the path trace sent in the J1 byte of path overhead. It is padded by the OC3 driver with 64-b… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.9 | csOc3FarEndJ1, csOc3PathJ1 | 0 | 0 | The expected path trace of the far end interface. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.10 | csOc3Scramble, csOc3FarEndJ1 | 0 | 0 | The expected path trace of the far end interface. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.11 | csOc3NearEndPerfMonControl, csOc3Scramble | 0 | 0 | This object controls the scrambling feature on this OC3 port. If this object is enabled, the SPE payload will be scrambled. If t… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.12 | csOc3FarEndPerfMonControl, csOc3NearEndPerfMonControl | 0 | 0 | None |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.13 | csOc3ApsControl, csOc3FarEndPerfMonControl | 0 | 0 | None |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.14 | csOc3ApsForce, csOc3ApsControl | 0 | 0 | Force protection switch. When set to 'forceToSwitch' it switches the active port between the two internal ports indicated by csO… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.15 | csOc3ApsActivePort, csOc3ApsForce | 0 | 0 | This object indicates which of the internal port is currently active. The non-active one is used for protection. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.16 | csOc3AlarmControl, csOc3ApsActivePort | 0 | 0 | This object indicates which of the internal port is currently active. The non-active one is used for protection. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.17 | csOc3Loopback, csOc3AlarmControl | 0 | 0 | The current loopback state of the SONET/SDH interface. The values mean: noLoop Not in the loopback state. A device that is not capa… |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.18 | csOc3AdminStatus, csOc3Loopback | 0 | 0 | This object is used to enable/disable this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.19 | csOc3OperStatus, csOc3AdminStatus | 0 | 0 | This object is used to enable/disable this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.20 | csOc3TimeElapsed, csOc3OperStatus | 0 | 0 | This object indicates the current operational status of this Ds3 port. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.21 | csOc3ValidIntervals, csOc3TimeElapsed | 0 | 0 | This object indicates the number of previous 15-minute intervals for which data was collected. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.22 | csOc3InvalidIntervals, csOc3ValidIntervals | 0 | 0 | This object indicates the number of previous 15-minute intervals for which data was collected. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.23 | csOc3PosEncapType, csOc3InvalidIntervals | 0 | 0 | This object indicates the number of previous 15-minute intervals for which data was not able to be collected. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.24 | csOc3PosEmptyCellType, csOc3PosEncapType | 0 | 0 | This object is used to select the type of empty cell to be transmitted. It is deprecated due to not being supported in POS. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.25 | csOc3PosMaxPacketSize, csOc3PosEmptyCellType | 0 | 0 | This object specifies the maximum packet size required for this port. This object applies to POS only. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.26 | csOc3PosOperStatus, csOc3PosMaxPacketSize | 0 | 0 | This object specifies the maximum packet size required for this port. This object applies to POS only. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.27 | csOc3MediumLineType, csOc3PosOperStatus | 0 | 0 | This object indicates the current operational status of this channel. It is deprecated in favor of using csOc3AdminStatus instead. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.28 | csOc3ReceivedPathJ1, csOc3MediumLineType | 0 | 0 | The actual received path trace of the far end interface. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.29 | csOc3ReceivedPathJ1 | 0 | 0 | The actual received path trace of the far end interface. |
| 1.3.6.1.4.1.3085.3.1.3.3.1.1.1.30 | csOcNSpeed | 0 | 0 | The speed of OCn interface. |