This object is used to indicate the set of BGP connections
that need to be cleared. If set to 'nbr' the 'csBgpNbrClearConn'
attribute must be set. If set to 'nbrGroup' the csBgpNbrClearNbrGroupName'
must be set.
When this object is read the value 'none' will be returned.
Parsed from file orion_mib_v31.txt
Company: None
Module: COSINE-ORION-MIB
This object is used to indicate the set of BGP connections
that need to be cleared. If set to 'nbr' the 'csBgpNbrClearConn'
attribute must be set. If set to 'nbrGroup' the csBgpNbrClearNbrGroupName'
must be set.
When this object is read the value 'none' will be returned.
Parsed from file COSINE-ORION-MIB.mib
Module: COSINE-ORION-MIB
Vendor: CoSine Communication
Module: COSINE-ORION-MIB (orion_mib_v31)
Type: TABULAR
Access: read-create
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
csBgpGenClearConnFlag OBJECT-TYPE SYNTAX INTEGER { none (1), nbr (2), nbrGroup (3), all (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to indicate the set of BGP connections that need to be cleared. If set to 'nbr' the 'csBgpNbrClearConn' attribute must be set. If set to 'nbrGroup' the csBgpNbrClearNbrGroupName' must be set. When this object is read the value 'none' will be returned." DEFVAL { none } ::= { csBgpGenEntry 15 }
csBgpGenClearConnFlag OBJECT-TYPE SYNTAX INTEGER { none (1), nbr (2), nbrGroup (3), all (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to indicate the set of BGP connections that need to be cleared. If set to 'nbr' the 'csBgpNbrClearConn' attribute must be set. If set to 'nbrGroup' the csBgpNbrClearNbrGroupName' must be set. When this object is read the value 'none' will be returned." DEFVAL { none } ::= { csBgpGenEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.1 | csBgpGenStatus | 0 | 0 | This object controls the operation of BGP as a whole on this virtual router. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.2 | csBgpGenLocalAS | 0 | 0 | The local autonomous system number of this virtual router. This object will have a value of 0 if bgp is disabled. If bgp is enabl… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.3 | csBgpGenClearConn | 0 | 0 | This object is used to clear one of the existing BGP connections. To clear a single connection, enter the ip address of the remo… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.4 | csBgpGenDefaultMetric | 0 | 0 | The default metric used by the system. default value is -1 which indicates that the metric is not configured |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.5 | csBgpGenDefaultLocalPref | 0 | 0 | Default local preference of this BGP speaker default value is 100. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.6 | csBgpGenConfedId | 0 | 0 | The ConfedId of this system. -1 indicates no confedId has been configured. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.7 | csBgpGenDampEnable | 0 | 0 | This attribute is used to enable/disable route flap damping on this virtual router. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.8 | csBgpGenDampHalfLife | 0 | 0 | The time in seconds after which the penalty associated with a flapping route is reduced by one half. default value is 15 mintues. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.9 | csBgpGenDampReuse | 0 | 0 | If the penalty of a flapping route that has been suppressed falls below the value configured by this attribute, then the route is… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.10 | csBgpGenDampSuppress | 0 | 0 | If the penalty of a flapping route exceeds the value configured by this atttribute, the route is suppressed. Default is 3. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.11 | csBgpGenDampMaxSuppress | 0 | 0 | The maximum time that the route can be suppressed. Default is 16. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.12 | csBgpGenRowStatus | 0 | 0 | The RowStatus object for this table. This is used to add & remove rows from this table. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.13 | csBgpGenLogAreaFlag | 0 | 0 | Each bit within this object enables loggin for a specific area within BGP. Below is a list of the different areas available for … |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.14 | csBgpGenLogLevelFlag | 0 | 0 | Each bit within this object enables logging at a specific level for BGP. Below is a list of the different log levels available a… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.16 | csBgpGenClearNbrGroupName | 0 | 0 | This object is used to clear all the BGP connections that belong to the specified peer group. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.17 | csBgpGenHoldTimeConfigured | 0 | 0 | The configured holdtime to use with all the Neighbors. default value of -1 indicates that this attribute has not been configured … |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.18 | csBgpGenKeepAliveConfigured | 0 | 0 | The configured Keepalive to use with all the Neighbors. default value of -1 indicates that this attribute has not been configured… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.19 | csBgpGenVpnLogAreaFlag | 0 | 0 | Each bit within this object enables logging for a specific area within BGP/VPN module. area bit inboun… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.20 | csBgpGenMaxPfx | 0 | 0 | This attribute limits the maximum number of BGP routes that can be learnt. Any additional routes learnt from BGP will be 1. discar… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.21 | csBgpGenMaxPfxThreshold | 0 | 0 | If this attribute is configured, then when the number of routes learnt from all BGP peer reaches this threshold (percentage of cs… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.22 | csBgpGenMaxPfxType | 0 | 0 | This attribute indicates the action that needs to be taken when the number of routes learnt from the bgp reaches the max prefix l… |