Default local preference of this BGP speaker
default value is 100.
Parsed from file orion_mib_v31.txt
Company: None
Module: COSINE-ORION-MIB
Default local preference of this BGP speaker
default value is 100.
Parsed from file COSINE-ORION-MIB.mib
Module: COSINE-ORION-MIB
Vendor: Cosine Communications
Module: COSINE-ORION-MIB
[Automatically extracted from oidview.com]
csBgpGenDefaultLocalPref OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Default local preference of this BGP speaker default value is 100." DEFVAL { 100 } ::= { csBgpGenEntry 5 }
csBgpGenDefaultLocalPref OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "Default local preference of this BGP speaker default value is 100." DEFVAL { 100 } ::= { csBgpGenEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.1 | csBgpGenStatus | 0 | 0 | This object controls the operation of BGP as a whole on this virtual router. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.2 | csBgpGenLocalAS | 0 | 0 | The local autonomous system number of this virtual router. This object will have a value of 0 if bgp is disabled. If bgp is enabl… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.3 | csBgpGenClearConn | 0 | 0 | This object is used to clear one of the existing BGP connections. To clear a single connection, enter the ip address of the remo… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.4 | csBgpGenDefaultMetric | 0 | 0 | The default metric used by the system. default value is -1 which indicates that the metric is not configured |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.6 | csBgpGenConfedId | 0 | 0 | The ConfedId of this system. -1 indicates no confedId has been configured. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.7 | csBgpGenDampEnable | 0 | 0 | This attribute is used to enable/disable route flap damping on this virtual router. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.8 | csBgpGenDampHalfLife | 0 | 0 | The time in seconds after which the penalty associated with a flapping route is reduced by one half. default value is 15 mintues. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.9 | csBgpGenDampReuse | 0 | 0 | If the penalty of a flapping route that has been suppressed falls below the value configured by this attribute, then the route is… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.10 | csBgpGenDampSuppress | 0 | 0 | If the penalty of a flapping route exceeds the value configured by this atttribute, the route is suppressed. Default is 3. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.11 | csBgpGenDampMaxSuppress | 0 | 0 | The maximum time that the route can be suppressed. Default is 16. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.12 | csBgpGenRowStatus | 0 | 0 | The RowStatus object for this table. This is used to add & remove rows from this table. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.13 | csBgpGenLogAreaFlag | 0 | 0 | Each bit within this object enables loggin for a specific area within BGP. Below is a list of the different areas available for … |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.14 | csBgpGenLogLevelFlag | 0 | 0 | Each bit within this object enables logging at a specific level for BGP. Below is a list of the different log levels available a… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.15 | csBgpGenClearConnFlag | 0 | 0 | This object is used to indicate the set of BGP connections that need to be cleared. If set to 'nbr' the 'csBgpNbrClearConn' attri… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.16 | csBgpGenClearNbrGroupName | 0 | 0 | This object is used to clear all the BGP connections that belong to the specified peer group. |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.17 | csBgpGenHoldTimeConfigured | 0 | 0 | The configured holdtime to use with all the Neighbors. default value of -1 indicates that this attribute has not been configured … |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.18 | csBgpGenKeepAliveConfigured | 0 | 0 | The configured Keepalive to use with all the Neighbors. default value of -1 indicates that this attribute has not been configured… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.19 | csBgpGenVpnLogAreaFlag | 0 | 0 | Each bit within this object enables logging for a specific area within BGP/VPN module. area bit inboun… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.20 | csBgpGenMaxPfx | 0 | 0 | This attribute limits the maximum number of BGP routes that can be learnt. Any additional routes learnt from BGP will be 1. discar… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.21 | csBgpGenMaxPfxThreshold | 0 | 0 | If this attribute is configured, then when the number of routes learnt from all BGP peer reaches this threshold (percentage of cs… |
| 1.3.6.1.4.1.3085.3.1.4.2.8.2.1.1.1.22 | csBgpGenMaxPfxType | 0 | 0 | This attribute indicates the action that needs to be taken when the number of routes learnt from the bgp reaches the max prefix l… |