This object controls the size of the session receive window.
It will be advertised to the peer during session setup if
csOrionL2tpConfigSessionFlowControl is set to Enable.
The value 0 has special significance. It indicates that
the peer must include sequence numbers in payload packets
but the peer need not flow control its transmissions. This
can be used to force a peer that is non-RFC compliant to
include sequence numbers in payload packets.
Parsed from file orion_mib_v31.txt
Company: None
Module: COSINE-ORION-MIB
This object controls the size of the session receive window.
It will be advertised to the peer during session setup if
csOrionL2tpConfigSessionFlowControl is set to Enable.
The value 0 has special significance. It indicates that
the peer must include sequence numbers in payload packets
but the peer need not flow control its transmissions. This
can be used to force a peer that is non-RFC compliant to
include sequence numbers in payload packets.
Parsed from file COSINE-ORION-MIB.mib
Module: COSINE-ORION-MIB
Vendor: Cosine Communications
Module: COSINE-ORION-MIB
[Automatically extracted from oidview.com]
csOrionL2tpConfigSessionRWS OBJECT-TYPE SYNTAX Integer32(0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the size of the session receive window. It will be advertised to the peer during session setup if csOrionL2tpConfigSessionFlowControl is set to Enable. The value 0 has special significance. It indicates that the peer must include sequence numbers in payload packets but the peer need not flow control its transmissions. This can be used to force a peer that is non-RFC compliant to include sequence numbers in payload packets." DEFVAL { 10 } ::= { csOrionL2tpConfigEntry 11 }
csOrionL2tpConfigSessionRWS OBJECT-TYPE SYNTAX Integer32(0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the size of the session receive window. It will be advertised to the peer during session setup if csOrionL2tpConfigSessionFlowControl is set to Enable. The value 0 has special significance. It indicates that the peer must include sequence numbers in payload packets but the peer need not flow control its transmissions. This can be used to force a peer that is non-RFC compliant to include sequence numbers in payload packets." DEFVAL { 10 } ::= { csOrionL2tpConfigEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.1 | csOrionL2tpConfigServiceIf | 0 | 0 | This object defines the VI over which communication will occur with peers. This object can be set only when there is no tunnel. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.2 | csOrionL2tpConfigMaxTunnels | 0 | 0 | This object defines the maximum number of L2TP tunnels that can be established. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.3 | csOrionL2tpConfigMaxSessionsPerTunnel | 0 | 0 | This object defines the maximum sessions that can be established per tunnel. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.4 | csOrionL2tpConfigTunnelAuthentication | 0 | 0 | This object controls the tunnel authentication. If set to Enable, a challenge will be sent to the peer during tunnel creation. Th… |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.5 | csOrionL2tpConfigTunnelHelloInterval | 0 | 0 | This object defines the interval (in seconds) in which HELLO (or keep-alive) packets are to be sent to the tunnel peer. Setting t… |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.6 | csOrionL2tpConfigTunnelMaxRetransmissions | 0 | 0 | This object defines the number of retransmissions which the tunnel will attempt before assuming that the peer is no longer respon… |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.7 | csOrionL2tpConfigTunnelMaxRetransmissionTimeout | 0 | 0 | This object defines the maximum retransmission timeout interval in seconds which the tunnel will wait before retransmitting a con… |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.8 | csOrionL2tpConfigTunnelRWS | 0 | 0 | This object defines the control channel receive window size. It specifies the maximum number of packets the tunnel peer can send … |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.9 | csOrionL2tpConfigTunnelEmptyTunnelTimeout | 0 | 0 | This object controls the time interval in seconds after which an alive but empty tunnel (i.e. a tunnel without sessions) will be … |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.10 | csOrionL2tpConfigSessionFlowControl | 0 | 0 | This object will be used to control whether the peer will be requested to flow control its transmissions. Note that regardless of… |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.12 | csOrionL2tpConfigSessionTxQueueSize | 0 | 0 | This object controls the size of the session-specific transmit queue. If the peer has requested flow control and the peer's sessi… |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.13 | csOrionL2tpConfigSessionPacketSequencing | 0 | 0 | This object determines whether or not session payload packets will be requested to be sent with sequence numbers from the tunnel … |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.14 | csOrionL2tpConfigPppConfigReqRetransmission | 0 | 0 | This object is identical to csOrionPppIfConfigReqRtx. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.15 | csOrionL2tpConfigPppRestartTimeout | 0 | 0 | This object is identical to csOrionPppIfTimeout. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.16 | csOrionL2tpConfigPppTermReqRetransmission | 0 | 0 | This object is identical to csOrionPppIfTerminateReqRtx. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.17 | csOrionL2tpConfigPppAuthProtocol | 0 | 0 | This object is identical to csOrionPppIfConfigAuth. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.18 | csOrionL2tpConfigPppReauthPeriod | 0 | 0 | This object is identical to csOrionPppIfReauth. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.19 | csOrionL2tpConfigPppEchoTimeout | 0 | 0 | The echo timeout in seconds. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.20 | csOrionL2tpConfigPppIpPoolName | 0 | 0 | The name of this address pool. This is used to identify a specific address pool. |