This object controls the tunnel authentication.
If set to Enable, a challenge will be sent to the peer
during tunnel creation. The tunnel will be torn down
if the peer does not send a valid response.
Regardless of the setting, if the peer sends a challenge
during tunnel creation, a response will be sent.
Parsed from file orion_mib_v31.txt
Company: None
Module: COSINE-ORION-MIB
This object controls the tunnel authentication.
If set to Enable, a challenge will be sent to the peer
during tunnel creation. The tunnel will be torn down
if the peer does not send a valid response.
Regardless of the setting, if the peer sends a challenge
during tunnel creation, a response will be sent.
Parsed from file COSINE-ORION-MIB.mib
Module: COSINE-ORION-MIB
Vendor: Cosine Communications
Module: COSINE-ORION-MIB
[Automatically extracted from oidview.com]
csOrionL2tpConfigTunnelAuthentication OBJECT-TYPE SYNTAX INTEGER{ enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the tunnel authentication. If set to Enable, a challenge will be sent to the peer during tunnel creation. The tunnel will be torn down if the peer does not send a valid response. Regardless of the setting, if the peer sends a challenge during tunnel creation, a response will be sent." DEFVAL { disable } ::= { csOrionL2tpConfigEntry 4 }
csOrionL2tpConfigTunnelAuthentication OBJECT-TYPE SYNTAX INTEGER{ enable (1), disable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the tunnel authentication. If set to Enable, a challenge will be sent to the peer during tunnel creation. The tunnel will be torn down if the peer does not send a valid response. Regardless of the setting, if the peer sends a challenge during tunnel creation, a response will be sent." DEFVAL { disable } ::= { csOrionL2tpConfigEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.1 | csOrionL2tpConfigServiceIf | 0 | 0 | This object defines the VI over which communication will occur with peers. This object can be set only when there is no tunnel. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.2 | csOrionL2tpConfigMaxTunnels | 0 | 0 | This object defines the maximum number of L2TP tunnels that can be established. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.3 | csOrionL2tpConfigMaxSessionsPerTunnel | 0 | 0 | This object defines the maximum sessions that can be established per tunnel. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.5 | csOrionL2tpConfigTunnelHelloInterval | 0 | 0 | This object defines the interval (in seconds) in which HELLO (or keep-alive) packets are to be sent to the tunnel peer. Setting t… |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.6 | csOrionL2tpConfigTunnelMaxRetransmissions | 0 | 0 | This object defines the number of retransmissions which the tunnel will attempt before assuming that the peer is no longer respon… |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.7 | csOrionL2tpConfigTunnelMaxRetransmissionTimeout | 0 | 0 | This object defines the maximum retransmission timeout interval in seconds which the tunnel will wait before retransmitting a con… |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.8 | csOrionL2tpConfigTunnelRWS | 0 | 0 | This object defines the control channel receive window size. It specifies the maximum number of packets the tunnel peer can send … |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.9 | csOrionL2tpConfigTunnelEmptyTunnelTimeout | 0 | 0 | This object controls the time interval in seconds after which an alive but empty tunnel (i.e. a tunnel without sessions) will be … |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.10 | csOrionL2tpConfigSessionFlowControl | 0 | 0 | This object will be used to control whether the peer will be requested to flow control its transmissions. Note that regardless of… |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.11 | csOrionL2tpConfigSessionRWS | 0 | 0 | This object controls the size of the session receive window. It will be advertised to the peer during session setup if csOrionL2t… |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.12 | csOrionL2tpConfigSessionTxQueueSize | 0 | 0 | This object controls the size of the session-specific transmit queue. If the peer has requested flow control and the peer's sessi… |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.13 | csOrionL2tpConfigSessionPacketSequencing | 0 | 0 | This object determines whether or not session payload packets will be requested to be sent with sequence numbers from the tunnel … |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.14 | csOrionL2tpConfigPppConfigReqRetransmission | 0 | 0 | This object is identical to csOrionPppIfConfigReqRtx. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.15 | csOrionL2tpConfigPppRestartTimeout | 0 | 0 | This object is identical to csOrionPppIfTimeout. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.16 | csOrionL2tpConfigPppTermReqRetransmission | 0 | 0 | This object is identical to csOrionPppIfTerminateReqRtx. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.17 | csOrionL2tpConfigPppAuthProtocol | 0 | 0 | This object is identical to csOrionPppIfConfigAuth. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.18 | csOrionL2tpConfigPppReauthPeriod | 0 | 0 | This object is identical to csOrionPppIfReauth. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.19 | csOrionL2tpConfigPppEchoTimeout | 0 | 0 | The echo timeout in seconds. |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.20 | csOrionL2tpConfigPppIpPoolName | 0 | 0 | The name of this address pool. This is used to identify a specific address pool. |