Setting this variable to performCalibration(2) causes
the UPS to discharge to calibrate the UPS.
The test will only start if the battery capacity is 100%.
The test runs until capacity is less than 25%.
Setting this variable to cancelCurrentCalibration(3)
after setting performCalibration(2) will cancel the
current discharge.
Setting this variable to noPerformCalibration(1)
will have no effect.
The value noPerformCalibration(1) will always be returned
when the variable is read.
The result of the calibration will be saved in
upsAdvTestCalibrationResult.
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
Setting this variable to performCalibration(2) causes
the UPS to discharge to calibrate the UPS.
The test will only start if the battery capacity is 100%.
The test runs until capacity is less than 25%.
Setting this variable to cancelCurrentCalibration(3)
after setting performCalibration(2) will cancel the
current discharge.
Setting this variable to noPerformCalibration(1)
will have no effect.
The value noPerformCalibration(1) will always be returned
when the variable is read.
The result of the calibration will be saved in
upsAdvTestCalibrationResult.
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
upsAdvTestRuntimeCalibration OBJECT-TYPE SYNTAX INTEGER { noPerformCalibration(1), performCalibration(2), cancelCurrentCalibration(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this variable to performCalibration(2) causes the UPS to discharge to calibrate the UPS. The test will only start if the battery capacity is 100%. The test runs until capacity is less than 25%. Setting this variable to cancelCurrentCalibration(3) after setting performCalibration(2) will cancel the current discharge. Setting this variable to noPerformCalibration(1) will have no effect. The value noPerformCalibration(1) will always be returned when the variable is read. The result of the calibration will be saved in upsAdvTestCalibrationResult." ::= { upsAdvTest 5 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
upsAdvTestRuntimeCalibration OBJECT-TYPE SYNTAX INTEGER { noPerformCalibration(1), performCalibration(2), cancelCurrentCalibration(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this variable to performCalibration(2) causes the UPS to discharge to calibrate the UPS. The test will only start if the battery capacity is 100%. The test runs until capacity is less than 25%. Setting this variable to cancelCurrentCalibration(3) after setting performCalibration(2) will cancel the current discharge. Setting this variable to noPerformCalibration(1) will have no effect. The value noPerformCalibration(1) will always be returned when the variable is read. The result of the calibration will be saved in upsAdvTestCalibrationResult." ::= { upsAdvTest 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.1.7.2.5.0 | upsAdvTestRuntimeCalibration | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.1.7.2.1 | upsAdvTestDiagnosticSchedule | 1 | 1 | The UPS system's automatic battery test schedule. |
| 1.3.6.1.4.1.318.1.1.1.7.2.2 | upsAdvTestDiagnostics | 1 | 1 | Setting this variable to testDiagnostics(2) causes the UPS to perform a diagnostic self test. Setting this value to noTestDiagno… |
| 1.3.6.1.4.1.318.1.1.1.7.2.3 | upsAdvTestDiagnosticsResults | 1 | 1 | The results of the last UPS diagnostics test performed. |
| 1.3.6.1.4.1.318.1.1.1.7.2.4 | upsAdvTestLastDiagnosticsDate | 1 | 1 | The date the last UPS diagnostics test was performed in mm/dd/yy format. |
| 1.3.6.1.4.1.318.1.1.1.7.2.6 | upsAdvTestCalibrationResults | 1 | 1 | The results of the last runtime calibration. Value ok(1) means a successful runtime calibration. Value invalidCalibration(2) in… |
| 1.3.6.1.4.1.318.1.1.1.7.2.7 | upsAdvTestCalibrationDate | 1 | 1 | The date the last UPS runtime calibration was performed in mm/dd/yy format. |
| 1.3.6.1.4.1.318.1.1.1.7.2.8 | upsAdvTestDiagnosticTime | 1 | 1 | The time of the day to perform automatic battery test. Expressed in 24 hour notation - hh:mm. |
| 1.3.6.1.4.1.318.1.1.1.7.2.9 | upsAdvTestDiagnosticDay | 1 | 1 | The day of the week to perform automatic battery test. |