Reference record for OID 1.3.6.1.4.1.318.1.1.7.2.4.1.2.8

parent: 1.3.6.1.4.1.318.1.1.7.2.4.1.2 (dm3ConfigRectAlarms)
node code: 8
node name: dm3ConfigRectCurrLimitAlarm
dot oid: 1.3.6.1.4.1.318.1.1.7.2.4.1.2.8
type: OBJECT-TYPE
asn1 oid: {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) apc(318) products(1) hardware(1) dcDM3(7) dm3Config(2) dm3ConfigPowerModules(4) dm3ConfigRectifier(1) dm3ConfigRectAlarms(2) dm3ConfigRectCurrLimitAlarm(8)}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) apc(318) products(1) hardware(1) dcDM3(7) dm3Config(2) dm3ConfigPowerModules(4) dm3ConfigRectifier(1) dm3ConfigRectAlarms(2) dm3ConfigRectCurrLimitAlarm(8)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) apc(318) products(1) hardware(1) dcDM3(7) dm3Config(2) dm3ConfigPowerModules(4) dm3ConfigRectifier(1) dm3ConfigRectAlarms(2) dm3ConfigRectCurrLimitAlarm(8)}

{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) apc(318) products(1) hardware(1) dcDM3(7) dm3Config(2) dm3ConfigPowerModules(4) dm3ConfigRectifier(1) dm3ConfigRectAlarms(2) dm3ConfigRectCurrLimitAlarm(8)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) apc(318) products(1) hardware(1) dcDM3(7) dm3Config(2) dm3ConfigPowerModules(4) dm3ConfigRectifier(1) dm3ConfigRectAlarms(2) dm3ConfigRectCurrLimitAlarm(8)}

{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) apc(318) products(1) hardware(1) dcDM3(7) dm3Config(2) dm3ConfigPowerModules(4) dm3ConfigRectifier(1) dm3ConfigRectAlarms(2) dm3ConfigRectCurrLimitAlarm(8)}
iri oid: /iso/identified-organization/dod/internet/private/enterprise/apc/products/hardware/dcDM3/dm3Config/dm3ConfigPowerModules/dm3ConfigRectifier/dm3ConfigRectAlarms/dm3ConfigRectCurrLimitAlarm

/iso/identified-organization/dod/internet/private/enterprises/apc/products/hardware/dcDM3/dm3Config/dm3ConfigPowerModules/dm3ConfigRectifier/dm3ConfigRectAlarms/dm3ConfigRectCurrLimitAlarm

/iso/org/dod/internet/private/enterprise/apc/products/hardware/dcDM3/dm3Config/dm3ConfigPowerModules/dm3ConfigRectifier/dm3ConfigRectAlarms/dm3ConfigRectCurrLimitAlarm

/iso/org/dod/internet/private/enterprises/apc/products/hardware/dcDM3/dm3Config/dm3ConfigPowerModules/dm3ConfigRectifier/dm3ConfigRectAlarms/dm3ConfigRectCurrLimitAlarm

/iso/iso-identified-organization/dod/internet/private/enterprise/apc/products/hardware/dcDM3/dm3Config/dm3ConfigPowerModules/dm3ConfigRectifier/dm3ConfigRectAlarms/dm3ConfigRectCurrLimitAlarm

/iso/iso-identified-organization/dod/internet/private/enterprises/apc/products/hardware/dcDM3/dm3Config/dm3ConfigPowerModules/dm3ConfigRectifier/dm3ConfigRectAlarms/dm3ConfigRectCurrLimitAlarm
iri by oid_info: /ISO/Identified-Organization/6/1/4/1/318/1/1/7/2/4/1/2/8

Description by mibdepot

For the Rectifier Current Limit Alarm (indicating rectifier in the Current Limit state);
Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
alarm condition.
Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
alarm condition.
Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
alarm condition.
Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
alarm condition.
Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
alarm condition.
Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
alarm condition.
Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
alarm condition.
Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
alarm condition.
Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
to be activated if ONE rectifier fails in an N+1 system. It causes the alarm specified in the
dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system.

Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB

Description by circitor

Information by mibdepot

dm3ConfigRectCurrLimitAlarm OBJECT-TYPE
   SYNTAX INTEGER       {
      alarmIgnore               (1),
      alarmRelay1               (2),
      alarmRelay2               (3),
      alarmRelay3               (4),
      alarmRelay4               (5),
      alarmRelay5               (6),
      alarmRelay6               (7),
      alarmMinor                (8),
      alarmMajor                (9),
      alarmNofN                (10)
   }
   ACCESS read-write
   STATUS mandatory
   DESCRIPTION
      "For the Rectifier Current Limit Alarm (indicating rectifier in the Current Limit state);
      Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
      Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
      alarm condition.
      Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
      alarm condition.
      Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
      alarm condition.
      Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
      alarm condition.
      Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
      alarm condition.
      Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
      alarm condition.
      Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
      alarm condition.
      Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
      alarm condition.
      Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
      to be activated if ONE rectifier fails in an N+1 system.  It causes the alarm specified in the 
      dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system."

   ::= { dm3ConfigRectAlarms 8 }

Information by oid_info

Vendor: American Power Conversion Corp.
Module: PowerNet-MIB

[Automatically extracted from oidview.com]

Information by circitor

dm3ConfigRectCurrLimitAlarm OBJECT-TYPE
   SYNTAX INTEGER       {
      alarmIgnore               (1),
      alarmRelay1               (2),
      alarmRelay2               (3),
      alarmRelay3               (4),
      alarmRelay4               (5),
      alarmRelay5               (6),
      alarmRelay6               (7),
      alarmMinor                (8),
      alarmMajor                (9),
      alarmNofN                (10)
   }
   ACCESS read-write
   STATUS mandatory
   DESCRIPTION
      "For the Rectifier Current Limit Alarm (indicating rectifier in the Current Limit state);
      Setting this OID to alarmIgnore (1) results in the alarm condition being ignored.
      Setting this OID to alarmRelay1 (2) causes relay 1 to be activated for an
      alarm condition.
      Setting this OID to alarmRelay2 (3) causes relay 2 to be activated for an
      alarm condition.
      Setting this OID to alarmRelay3 (4) causes relay 3 to be activated for an
      alarm condition.
      Setting this OID to alarmRelay4 (5) causes relay 4 to be activated for an
      alarm condition.
      Setting this OID to alarmRelay5 (6) causes relay 5 to be activated for an
      alarm condition.
      Setting this OID to alarmRelay6 (7) causes relay 6 to be activated for an
      alarm condition.
      Setting this OID to alarmMinor (8) causes the Minor relay to be activated for an
      alarm condition.
      Setting this OID to alarmMajor (9) causes the Major relay to be activated for an
      alarm condition.
      Setting this OID to alarmNofN (10) causes the alarm specified in the dm3ConfigRect1ofNAlarm OID
      to be activated if ONE rectifier fails in an N+1 system.  It causes the alarm specified in the 
      dm3ConfigRect2ofNAlarm OID to be activated if TWO OR MORE rectifiers fail in an N+1 system."

   ::= { dm3ConfigRectAlarms 8 }

First Registration Authority (recovered by parent 1.3.6.1.4.1.318)

Yoest Peter C.

Children (1)

OID	Name	Sub children	Sub Nodes Total	Description
1.3.6.1.4.1.318.1.1.7.2.4.1.2.8.0	dm3ConfigRectCurrLimitAlarm	0	0	None

Brothers (11)

OID	Name	Sub children	Sub Nodes Total	Description
1.3.6.1.4.1.318.1.1.7.2.4.1.2.1	dm3ConfigRectHighVoltAlarm	1	1	For the Rectifier High Voltage Alarm; Setting this OID to alarmIgnore (1) results in the alarm condition being ignored. Setting t…
1.3.6.1.4.1.318.1.1.7.2.4.1.2.2	dm3ConfigRectLowVoltAlarm	1	1	For the Rectifier Low Voltage Alarm; Setting this OID to alarmIgnore (1) results in the alarm condition being ignored. Setting th…
1.3.6.1.4.1.318.1.1.7.2.4.1.2.3	dm3ConfigRectConfigAlarm	1	1	This alarm is activated when a new rectifier is detected; Setting this OID to alarmIgnore (1) results in the alarm condition bei…
1.3.6.1.4.1.318.1.1.7.2.4.1.2.4	dm3ConfigRect1ofNAlarm	1	1	This setting indicates the action if ONE rectifier of a N+1 system has failed; Setting this OID to alarmIgnore (1) results in th…
1.3.6.1.4.1.318.1.1.7.2.4.1.2.5	dm3ConfigRect2ofNAlarm	1	1	This setting indicates the action if TWO OR MORE rectifiers of a N+1 system have failed; Setting this OID to alarmIgnore (1) res…
1.3.6.1.4.1.318.1.1.7.2.4.1.2.6	dm3ConfigRectDiagAlarm	1	1	For the Rectifier Controller Diagnostics Alarm; Setting this OID to alarmIgnore (1) results in the alarm condition being ignored…
1.3.6.1.4.1.318.1.1.7.2.4.1.2.7	dm3ConfigRectImbalanceAlarm	1	1	For the Rectifier Imbalance Alarm; Setting this OID to alarmIgnore (1) results in the alarm condition being ignored. Setting this…
1.3.6.1.4.1.318.1.1.7.2.4.1.2.9	dm3ConfigRectStandbyAlarm	1	1	For the Rectifier Standby Alarm (indicating output DC has been turned off); Setting this OID to alarmIgnore (1) results in the a…
1.3.6.1.4.1.318.1.1.7.2.4.1.2.10	dm3ConfigRectFanFailAlarm	1	1	For the Rectifier Fan Fail Alarm; Setting this OID to alarmIgnore (1) results in the alarm condition being ignored. Setting this …
1.3.6.1.4.1.318.1.1.7.2.4.1.2.11	dm3ConfigRectFailAlarm	1	1	For the Rectifier Fail Alarm; Setting this OID to alarmIgnore (1) results in the alarm condition being ignored. Setting this OID …
1.3.6.1.4.1.318.1.1.7.2.4.1.2.12	dm3ConfigRectHwVoltAlarm	1	1	For the Rectifier Hardware Voltage Alarm (indicating voltage outside realistic limits, or a possible measurement fault); Setting …