Converter Communication Fail timeout. This OID represents the time interval in which there is no
communication between the converter and the master controller at which the converter will reset
all its values to default.
Values are represented in hundredths of Seconds.
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively.
Parsed from file powernet.mib.txt
Company: None
Module: PowerNet-MIB
Converter Communication Fail timeout. This OID represents the time interval in which there is no
communication between the converter and the master controller at which the converter will reset
all its values to default.
Values are represented in hundredths of Seconds.
Attempts to set the value above or below the acceptable range of the powerplant
will cause the value to be set at the high or low point of the range respectively.
Parsed from file PowerNet-MIB.mib
Module: PowerNet-MIB
dm3ConfigConvFailComm OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Converter Communication Fail timeout. This OID represents the time interval in which there is no communication between the converter and the master controller at which the converter will reset all its values to default. Values are represented in hundredths of Seconds. Attempts to set the value above or below the acceptable range of the powerplant will cause the value to be set at the high or low point of the range respectively." ::= { dm3ConfigConvThresh 7 }
Vendor: American Power Conversion Corp.
Module: PowerNet-MIB
[Automatically extracted from oidview.com]
dm3ConfigConvFailComm OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Converter Communication Fail timeout. This OID represents the time interval in which there is no communication between the converter and the master controller at which the converter will reset all its values to default. Values are represented in hundredths of Seconds. Attempts to set the value above or below the acceptable range of the powerplant will cause the value to be set at the high or low point of the range respectively." ::= { dm3ConfigConvThresh 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.7.2.4.2.1.7.0 | dm3ConfigConvFailComm | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.318.1.1.7.2.4.2.1.1 | dm3ConfigConvHighVoltThresh | 1 | 1 | Converter high voltage threshold. If converter voltage exceeds threshold a converter high voltage alarm will occur. Values are … |
| 1.3.6.1.4.1.318.1.1.7.2.4.2.1.2 | dm3ConfigConvLowVoltThresh | 1 | 1 | Converter low voltage threshold. If converter voltage exceeds threshold a converter low voltage alarm will occur. Values are re… |
| 1.3.6.1.4.1.318.1.1.7.2.4.2.1.3 | dm3ConfigConvFailSafe | 1 | 1 | Converter Fail Safe point. This OID represents the value sent to converter controllers to use in the event of communications lo… |
| 1.3.6.1.4.1.318.1.1.7.2.4.2.1.4 | dm3ConfigConvSetPoint | 1 | 1 | Converter Set point. This OID represents the initial set point used in the voltage control loop. Units are thousandths of Volts… |
| 1.3.6.1.4.1.318.1.1.7.2.4.2.1.5 | dm3ConfigConvFailMax | 1 | 1 | Converter Fail Maximum limit. This OID represents the value sent to the converter controllers to define the maximum set point a… |
| 1.3.6.1.4.1.318.1.1.7.2.4.2.1.6 | dm3ConfigConvFailMin | 1 | 1 | Converter Fail Minimum limit. This OID represents the value sent to the converter controllers to define the minimum set point a… |