This variable represents the DTE control mode of the ncmimux
Parsed from file ncmimux.mib.txt
Company: None
Module: VERILINK-ENTERPRISE-NCMIMUX-MIB
This variable represents the DTE control mode of the ncmimux
Parsed from file VERILINK-ENTERPRISE-NCMIMUX-MIB.mib
Module: VERILINK-ENTERPRISE-NCMIMUX-MIB
Vendor: Verilink Corp
Module: VERILINK-ENTERPRISE-NCMIMUX-MIB
[Automatically extracted from oidview.com]
ncmimuxQuadSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents the DTE control mode of the ncmimux" ::= { ncmimuxConfigEntry 19 }
ncmimuxQuadSlot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents the DTE control mode of the ncmimux" ::= { ncmimuxConfigEntry 19 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3030.7000.1.1 | ncmimuxNIDConfigIndex | 0 | 0 | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3030.7000.1.2 | ncmimuxLineIndex | 0 | 0 | This object is the identifier of a Inter- face on a managed device. If there is an ifEn- try that is directly associated with … |
| 1.3.6.1.4.1.321.1.3030.7000.1.3 | ncmimuxEndId | 0 | 0 | This value for this object indicates which end of the equipment it is accessing. |
| 1.3.6.1.4.1.321.1.3030.7000.1.4 | ncmimuxIfIndex | 0 | 0 | This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213). |
| 1.3.6.1.4.1.321.1.3030.7000.1.5 | ncmimuxBkplaneBusSelect | 0 | 0 | This object only has signifiance for IMUX 2164. This variable specifies which IMUX line(s) is used, and which backplane bus is as… |
| 1.3.6.1.4.1.321.1.3030.7000.1.6 | ncmimuxCarrierLineRate | 0 | 0 | This variable specifies whether the carrier line rate is T1 or carrier line is E1. |
| 1.3.6.1.4.1.321.1.3030.7000.1.7 | ncmimuxCarrierLinesEqp | 0 | 0 | This variable indicates the inverse multiplexer carrier lines equipped. One bit per line. Here each bit in this byte represents o… |
| 1.3.6.1.4.1.321.1.3030.7000.1.8 | ncmimuxChanneling | 0 | 0 | This variable indicates the inverse multiplexer mode for T1 which by default is set to 64 Kbps and when the field is set to (1) t… |
| 1.3.6.1.4.1.321.1.3030.7000.1.9 | ncmimuxDTEClkTransmit | 0 | 0 | This field request to determine the DTE data port clock phase is normal or inverted. 'Normal' refers to inverse multiplexer DTE c… |
| 1.3.6.1.4.1.321.1.3030.7000.1.10 | ncmimuxDTEClkRecv | 0 | 0 | This field request to determine the DTE data port clock phase is normal or inverted. 'Normal' refers to inverse multiplexer DTE c… |
| 1.3.6.1.4.1.321.1.3030.7000.1.11 | ncmimuxDTEClkRefern | 0 | 0 | This field request to determine the DTE data port clock phase is normal or inverted. 'Normal' refers to inverse multiplexer DTE c… |
| 1.3.6.1.4.1.321.1.3030.7000.1.12 | ncmimuxDTEMode | 0 | 0 | This variable represents the DTE mode of the ncmimux |
| 1.3.6.1.4.1.321.1.3030.7000.1.13 | ncmimuxDSR | 0 | 0 | This variable represents Data Set Ready for the ncmimux which could be set for all interfaces. |
| 1.3.6.1.4.1.321.1.3030.7000.1.14 | ncmimuxTM | 0 | 0 | This variable represents Test Mode for the ncmimux which could be set for all interfaces. |
| 1.3.6.1.4.1.321.1.3030.7000.1.15 | ncmimuxCTS | 0 | 0 | This variable represents Clear To Send for the ncmimux which could be set for only V.35, EI530 and RS449 interfaces. |
| 1.3.6.1.4.1.321.1.3030.7000.1.16 | ncmimuxDCD | 0 | 0 | This variable represents Data Carrier Detect for the ncmimux which could be set for only V.35, EI530 and RS449 interfaces. |
| 1.3.6.1.4.1.321.1.3030.7000.1.17 | ncmimuxRI | 0 | 0 | This variable represents Ring Indicator for the ncmimux which could be set for only V.35 interfaces. |
| 1.3.6.1.4.1.321.1.3030.7000.1.18 | ncmimuxSnapType | 0 | 0 | This variable represents the snap type for the ncmimux |