This variable indicates the inverse multiplexer mode
for T1 which by default is set to 64 Kbps and when the
field is set to (1) the 56 kbps mode is selected.
Parsed from file ncmimux.mib.txt
Company: None
Module: VERILINK-ENTERPRISE-NCMIMUX-MIB
This variable indicates the inverse multiplexer mode
for T1 which by default is set to 64 Kbps and when the
field is set to (1) the 56 kbps mode is selected.
Parsed from file VERILINK-ENTERPRISE-NCMIMUX-MIB.mib
Module: VERILINK-ENTERPRISE-NCMIMUX-MIB
Vendor: Verilink Corp
Module: VERILINK-ENTERPRISE-NCMIMUX-MIB
[Automatically extracted from oidview.com]
ncmimuxChanneling OBJECT-TYPE SYNTAX INTEGER { mode-64k(1), mode-56k(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the inverse multiplexer mode for T1 which by default is set to 64 Kbps and when the field is set to (1) the 56 kbps mode is selected." ::= { ncmimuxConfigEntry 8 }
ncmimuxChanneling OBJECT-TYPE SYNTAX INTEGER { mode-64k(1), mode-56k(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates the inverse multiplexer mode for T1 which by default is set to 64 Kbps and when the field is set to (1) the 56 kbps mode is selected." ::= { ncmimuxConfigEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.321.1.3030.7000.1.1 | ncmimuxNIDConfigIndex | 0 | 0 | This variable indicates the node id value of the node. |
| 1.3.6.1.4.1.321.1.3030.7000.1.2 | ncmimuxLineIndex | 0 | 0 | This object is the identifier of a Inter- face on a managed device. If there is an ifEn- try that is directly associated with … |
| 1.3.6.1.4.1.321.1.3030.7000.1.3 | ncmimuxEndId | 0 | 0 | This value for this object indicates which end of the equipment it is accessing. |
| 1.3.6.1.4.1.321.1.3030.7000.1.4 | ncmimuxIfIndex | 0 | 0 | This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213). |
| 1.3.6.1.4.1.321.1.3030.7000.1.5 | ncmimuxBkplaneBusSelect | 0 | 0 | This object only has signifiance for IMUX 2164. This variable specifies which IMUX line(s) is used, and which backplane bus is as… |
| 1.3.6.1.4.1.321.1.3030.7000.1.6 | ncmimuxCarrierLineRate | 0 | 0 | This variable specifies whether the carrier line rate is T1 or carrier line is E1. |
| 1.3.6.1.4.1.321.1.3030.7000.1.7 | ncmimuxCarrierLinesEqp | 0 | 0 | This variable indicates the inverse multiplexer carrier lines equipped. One bit per line. Here each bit in this byte represents o… |
| 1.3.6.1.4.1.321.1.3030.7000.1.9 | ncmimuxDTEClkTransmit | 0 | 0 | This field request to determine the DTE data port clock phase is normal or inverted. 'Normal' refers to inverse multiplexer DTE c… |
| 1.3.6.1.4.1.321.1.3030.7000.1.10 | ncmimuxDTEClkRecv | 0 | 0 | This field request to determine the DTE data port clock phase is normal or inverted. 'Normal' refers to inverse multiplexer DTE c… |
| 1.3.6.1.4.1.321.1.3030.7000.1.11 | ncmimuxDTEClkRefern | 0 | 0 | This field request to determine the DTE data port clock phase is normal or inverted. 'Normal' refers to inverse multiplexer DTE c… |
| 1.3.6.1.4.1.321.1.3030.7000.1.12 | ncmimuxDTEMode | 0 | 0 | This variable represents the DTE mode of the ncmimux |
| 1.3.6.1.4.1.321.1.3030.7000.1.13 | ncmimuxDSR | 0 | 0 | This variable represents Data Set Ready for the ncmimux which could be set for all interfaces. |
| 1.3.6.1.4.1.321.1.3030.7000.1.14 | ncmimuxTM | 0 | 0 | This variable represents Test Mode for the ncmimux which could be set for all interfaces. |
| 1.3.6.1.4.1.321.1.3030.7000.1.15 | ncmimuxCTS | 0 | 0 | This variable represents Clear To Send for the ncmimux which could be set for only V.35, EI530 and RS449 interfaces. |
| 1.3.6.1.4.1.321.1.3030.7000.1.16 | ncmimuxDCD | 0 | 0 | This variable represents Data Carrier Detect for the ncmimux which could be set for only V.35, EI530 and RS449 interfaces. |
| 1.3.6.1.4.1.321.1.3030.7000.1.17 | ncmimuxRI | 0 | 0 | This variable represents Ring Indicator for the ncmimux which could be set for only V.35 interfaces. |
| 1.3.6.1.4.1.321.1.3030.7000.1.18 | ncmimuxSnapType | 0 | 0 | This variable represents the snap type for the ncmimux |
| 1.3.6.1.4.1.321.1.3030.7000.1.19 | ncmimuxQuadSlot | 0 | 0 | This variable represents the DTE control mode of the ncmimux |