This trap alerts that one of the temperature sensors indicates
over temperature. The temperature sensor is identified by the
temperature sensor index.
Parsed from file fore-switch.mib.txt
Company: None
Module: Fore-Switch-MIB
This trap alerts that one of the temperature sensors indicates
over temperature. The temperature sensor is identified by the
temperature sensor index.
Parsed from file Fore-Switch-MIB.mib
Module: Fore-Switch-MIB
Vendor: Fore Systems, Inc.
Module: Fore-Switch-MIB
[Automatically extracted from oidview.com]
asxTempSensorOverTemp NOTIFICATION-TYPE OBJECTS { envTempSensorIndex, trapLogIndex } STATUS current DESCRIPTION "This trap alerts that one of the temperature sensors indicates over temperature. The temperature sensor is identified by the temperature sensor index." ::= { atmSwitch 0 32 }
asxTempSensorOverTemp NOTIFICATION-TYPE OBJECTS { envTempSensorIndex, trapLogIndex } STATUS current DESCRIPTION "This trap alerts that one of the temperature sensors indicates over temperature. The temperature sensor is identified by the temperature sensor index." ::= { atmSwitch 0 32 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.326.2.2.0.0 | asxSwLinkDown | 0 | 0 | An asxSwLinkDown trap signifies that the sending protocol entity recognizes a failure in one of the ATM Switch links that is conn… |
| 1.3.6.1.4.1.326.2.2.0.1 | asxSwLinkUp | 0 | 0 | An asxSwLinkUp trap signifies that the sending protocol entity recognizes that one of the ATM Switch links that is connected to a… |
| 1.3.6.1.4.1.326.2.2.0.2 | asxHostLinkDown | 0 | 0 | An asxHostLinkDown trap signifies that the sending protocol entity recognizes a failure in one of the ATM Switch links that is co… |
| 1.3.6.1.4.1.326.2.2.0.3 | asxHostLinkUp | 0 | 0 | An asxHostLinkUp trap signifies that the sending protocol entity recognizes that one of the ATM Switch links that is connected to… |
| 1.3.6.1.4.1.326.2.2.0.4 | asxNetModuleDown | 0 | 0 | An asxNetModuleDown trap signifies that the sending protocol entity recognizes a failure in one of the ATM Switch network modules… |
| 1.3.6.1.4.1.326.2.2.0.5 | asxNetModuleUp | 0 | 0 | An asxNetModuleUp trap signifies that the sending protocol entity recognizes a new operational ATM Switch network module, that is… |
| 1.3.6.1.4.1.326.2.2.0.6 | asxPsInputDown | 0 | 0 | This trap alerts that one ATM switch power supply failed due to failure in the input voltage. The power supply that failed is ide… |
| 1.3.6.1.4.1.326.2.2.0.7 | asxPsInputUp | 0 | 0 | This trap alerts that one ATM switch power supply that had an input failure is up. The power supply that is back up is identified… |
| 1.3.6.1.4.1.326.2.2.0.9 | asxPsOutputDown | 0 | 0 | This trap alerts that one ATM switch power supply output failed, or the power supply was physically removed. The power supply tha… |
| 1.3.6.1.4.1.326.2.2.0.10 | asxPsOutputUp | 0 | 0 | This trap alerts that one ATM switch power supply that had an output failure or was removed is now up. The power supply that is b… |
| 1.3.6.1.4.1.326.2.2.0.22 | asxFanBankDown | 0 | 0 | This trap alerts that one ATM switch fan bank failed. The fan bank that failed is identified by the fan bank index. |
| 1.3.6.1.4.1.326.2.2.0.23 | asxFanBankUp | 0 | 0 | This trap alerts that one ATM switch fan bank is up. The fan bank that is back up is identified by the fan bank index. |
| 1.3.6.1.4.1.326.2.2.0.28 | asxLinkDown | 0 | 0 | This trap alerts that the link that is identified by portName was configured up, but its underlying physical layer has lost its c… |
| 1.3.6.1.4.1.326.2.2.0.29 | asxLinkUp | 0 | 0 | This trap alerts that the link that is identified by portName is back up. |
| 1.3.6.1.4.1.326.2.2.0.30 | asxSpansDown | 0 | 0 | This trap alerts that the SPANS signalling on the link that is identified by the sigPathPort and sigPathVPI failed. |
| 1.3.6.1.4.1.326.2.2.0.31 | asxSpansUp | 0 | 0 | This trap alerts that the SPANS signalling on the link that is identified by the sigPathPort and sigPathVPI is up. |
| 1.3.6.1.4.1.326.2.2.0.33 | asxTempSensorRegularTemp | 0 | 0 | This trap alerts that one of the temperature sensors indicates regular temperature. The temperature sensor is identified by the t… |
| 1.3.6.1.4.1.326.2.2.0.34 | asxFabricTemperatureOverTemp | 0 | 0 | This trap alerts that one of the temperature sensors indicates over temperature. The temperature sensor is identified by the temp… |
| 1.3.6.1.4.1.326.2.2.0.35 | asxFabricTemperatureRegularTemp | 0 | 0 | This trap alerts that one of the temperature sensors indicates regular temperature. The temperature sensor is identified by the t… |
| 1.3.6.1.4.1.326.2.2.0.36 | asxSonetLOSDetected | 0 | 0 | This trap indicates that the specified SONET port is experiencing Loss Of Signal. Bellcore Document TA-NWT-000253 Section 6.3.1.1… |
| 1.3.6.1.4.1.326.2.2.0.37 | asxSonetLOSCleared | 0 | 0 | This trap indicates that the LOS condition identified by trap asxSonetLOSDetected has been cleared. |
| 1.3.6.1.4.1.326.2.2.0.38 | asxSonetPathLabelDetected | 0 | 0 | This trap indicates that the specified SONET port is receiving and errored C2 Path Label byte. Reference Bellcore Document TA-NWT… |
| 1.3.6.1.4.1.326.2.2.0.39 | asxSonetPathLabelCleared | 0 | 0 | This trap indicates that the Errored Path Label (C2) byte error condition signaled by the asxSonetPathLabelDetected trap has been… |
| 1.3.6.1.4.1.326.2.2.0.40 | asxSonetLineAISDetected | 0 | 0 | This trap indicates that the specified SONET port is receiving a Line level Alarm Indication Signal from the far-end equipment. |
| 1.3.6.1.4.1.326.2.2.0.41 | asxSonetLineAISCleared | 0 | 0 | This trap indicates that the Line AIS error condition signaled by the asxSonetLineAISDetected trap has been cleared. |
| 1.3.6.1.4.1.326.2.2.0.46 | asxDS3PLCPYellowDetected | 0 | 0 | This trap indicates that the specified DS3 port has detected incoming PLCP Yellow Alarm. |
| 1.3.6.1.4.1.326.2.2.0.47 | asxDS3PLCPYellowCleared | 0 | 0 | This trap indicates that the specified DS3 port has detected clearance of incoming PLCP Yellow Alarm. |
| 1.3.6.1.4.1.326.2.2.0.48 | asxDS3PLCPLOFDetected | 0 | 0 | This trap indicates that the specified DS3 port has detected incoming PLCP LOF Alarm. |
| 1.3.6.1.4.1.326.2.2.0.49 | asxDS3PLCPLOFCleared | 0 | 0 | This trap indicates that the specified DS3 port has detected clearance of incoming PLCP LOF Alarm. |
| 1.3.6.1.4.1.326.2.2.0.50 | asxDS3LOFDetected | 0 | 0 | This trap indicates that Loss Of Frame(LOF) is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.51 | asxDS3LOFCleared | 0 | 0 | This trap indicates that Loss Of Frame is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.52 | asxDS3AISDetected | 0 | 0 | This trap indicates that AIS Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.53 | asxDS3AISCleared | 0 | 0 | This trap indicates that AIS Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.60 | asxDS1PLCPYellowDetected | 0 | 0 | This trap indicates that the specified DS1 port has detected incoming PLCP Yellow Alarm. |
| 1.3.6.1.4.1.326.2.2.0.61 | asxDS1PLCPYellowCleared | 0 | 0 | This trap indicates that the specified DS1 port has detected clearance of incoming PLCP Yellow Alarm. |
| 1.3.6.1.4.1.326.2.2.0.62 | asxDS1PLCPLOFDetected | 0 | 0 | This trap indicates that the specified DS1 port has detected incoming PLCP LOF Alarm. |
| 1.3.6.1.4.1.326.2.2.0.63 | asxDS1PLCPLOFCleared | 0 | 0 | This trap indicates that the specified DS1 port has detected clearance of incoming PLCP LOF Alarm. |
| 1.3.6.1.4.1.326.2.2.0.64 | asxDS1YellowDetected | 0 | 0 | This trap indicates that Yellow Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.65 | asxDS1YellowCleared | 0 | 0 | This trap indicates that Yellow Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.66 | asxDS1AISDetected | 0 | 0 | This trap indicates that AIS Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.67 | asxDS1AISCleared | 0 | 0 | This trap indicates that AIS Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.68 | asxDS1LOSDetected | 0 | 0 | This trap indicates that LOS Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.69 | asxDS1LOSCleared | 0 | 0 | This trap indicates that LOS Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.70 | asxDS1LOFDetected | 0 | 0 | This trap indicates that LOF Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.71 | asxDS1LOFCleared | 0 | 0 | This trap indicates that LOF Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.74 | asxDS3FERFDetected | 0 | 0 | This trap indicates that FERF Alarm or DS3 Yellow Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.75 | asxDS3FERFCleared | 0 | 0 | This trap indicates that FERF Alarm or DS3 Yellow Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.78 | asxE3YellowDetected | 0 | 0 | This trap indicates that the Yellow Alarm is being detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.79 | asxE3YellowCleared | 0 | 0 | This trap indicates that Yellow alarm has cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.80 | asxE3OOFDetected | 0 | 0 | This trap indicates that Out Of Frame (OOF) is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.81 | asxE3OOFCleared | 0 | 0 | This trap indicates that Loss Of Frame is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.82 | asxE3AtmLCDDetected | 0 | 0 | This trap indicates that the specified E3 port is experiencing Loss of Cell Deliniation (LCD). A LCD failure is declared when the… |
| ... | ||||