Notifications
View at oid-info.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.0.0 | asxSwLinkDown | 0 | 0 | An asxSwLinkDown trap signifies that the sending protocol entity recognizes a failure in one of the ATM Switch links that is conn… |
| 1.3.6.1.4.1.326.2.2.0.1 | asxSwLinkUp | 0 | 0 | An asxSwLinkUp trap signifies that the sending protocol entity recognizes that one of the ATM Switch links that is connected to a… |
| 1.3.6.1.4.1.326.2.2.0.2 | asxHostLinkDown | 0 | 0 | An asxHostLinkDown trap signifies that the sending protocol entity recognizes a failure in one of the ATM Switch links that is co… |
| 1.3.6.1.4.1.326.2.2.0.3 | asxHostLinkUp | 0 | 0 | An asxHostLinkUp trap signifies that the sending protocol entity recognizes that one of the ATM Switch links that is connected to… |
| 1.3.6.1.4.1.326.2.2.0.4 | asxNetModuleDown | 0 | 0 | An asxNetModuleDown trap signifies that the sending protocol entity recognizes a failure in one of the ATM Switch network modules… |
| 1.3.6.1.4.1.326.2.2.0.5 | asxNetModuleUp | 0 | 0 | An asxNetModuleUp trap signifies that the sending protocol entity recognizes a new operational ATM Switch network module, that is… |
| 1.3.6.1.4.1.326.2.2.0.6 | asxPsInputDown | 0 | 0 | This trap alerts that one ATM switch power supply failed due to failure in the input voltage. The power supply that failed is ide… |
| 1.3.6.1.4.1.326.2.2.0.7 | asxPsInputUp | 0 | 0 | This trap alerts that one ATM switch power supply that had an input failure is up. The power supply that is back up is identified… |
| 1.3.6.1.4.1.326.2.2.0.9 | asxPsOutputDown | 0 | 0 | This trap alerts that one ATM switch power supply output failed, or the power supply was physically removed. The power supply tha… |
| 1.3.6.1.4.1.326.2.2.0.10 | asxPsOutputUp | 0 | 0 | This trap alerts that one ATM switch power supply that had an output failure or was removed is now up. The power supply that is b… |
| 1.3.6.1.4.1.326.2.2.0.22 | asxFanBankDown | 0 | 0 | This trap alerts that one ATM switch fan bank failed. The fan bank that failed is identified by the fan bank index. |
| 1.3.6.1.4.1.326.2.2.0.23 | asxFanBankUp | 0 | 0 | This trap alerts that one ATM switch fan bank is up. The fan bank that is back up is identified by the fan bank index. |
| 1.3.6.1.4.1.326.2.2.0.28 | asxLinkDown | 0 | 0 | This trap alerts that the link that is identified by portName was configured up, but its underlying physical layer has lost its c… |
| 1.3.6.1.4.1.326.2.2.0.29 | asxLinkUp | 0 | 0 | This trap alerts that the link that is identified by portName is back up. |
| 1.3.6.1.4.1.326.2.2.0.30 | asxSpansDown | 0 | 0 | This trap alerts that the SPANS signalling on the link that is identified by the sigPathPort and sigPathVPI failed. |
| 1.3.6.1.4.1.326.2.2.0.31 | asxSpansUp | 0 | 0 | This trap alerts that the SPANS signalling on the link that is identified by the sigPathPort and sigPathVPI is up. |
| 1.3.6.1.4.1.326.2.2.0.32 | asxTempSensorOverTemp | 0 | 0 | This trap alerts that one of the temperature sensors indicates over temperature. The temperature sensor is identified by the temp… |
| 1.3.6.1.4.1.326.2.2.0.33 | asxTempSensorRegularTemp | 0 | 0 | This trap alerts that one of the temperature sensors indicates regular temperature. The temperature sensor is identified by the t… |
| 1.3.6.1.4.1.326.2.2.0.34 | asxFabricTemperatureOverTemp | 0 | 0 | This trap alerts that one of the temperature sensors indicates over temperature. The temperature sensor is identified by the temp… |
| 1.3.6.1.4.1.326.2.2.0.35 | asxFabricTemperatureRegularTemp | 0 | 0 | This trap alerts that one of the temperature sensors indicates regular temperature. The temperature sensor is identified by the t… |
| 1.3.6.1.4.1.326.2.2.0.36 | asxSonetLOSDetected | 0 | 0 | This trap indicates that the specified SONET port is experiencing Loss Of Signal. Bellcore Document TA-NWT-000253 Section 6.3.1.1… |
| 1.3.6.1.4.1.326.2.2.0.37 | asxSonetLOSCleared | 0 | 0 | This trap indicates that the LOS condition identified by trap asxSonetLOSDetected has been cleared. |
| 1.3.6.1.4.1.326.2.2.0.38 | asxSonetPathLabelDetected | 0 | 0 | This trap indicates that the specified SONET port is receiving and errored C2 Path Label byte. Reference Bellcore Document TA-NWT… |
| 1.3.6.1.4.1.326.2.2.0.39 | asxSonetPathLabelCleared | 0 | 0 | This trap indicates that the Errored Path Label (C2) byte error condition signaled by the asxSonetPathLabelDetected trap has been… |
| 1.3.6.1.4.1.326.2.2.0.40 | asxSonetLineAISDetected | 0 | 0 | This trap indicates that the specified SONET port is receiving a Line level Alarm Indication Signal from the far-end equipment. |
| 1.3.6.1.4.1.326.2.2.0.41 | asxSonetLineAISCleared | 0 | 0 | This trap indicates that the Line AIS error condition signaled by the asxSonetLineAISDetected trap has been cleared. |
| 1.3.6.1.4.1.326.2.2.0.46 | asxDS3PLCPYellowDetected | 0 | 0 | This trap indicates that the specified DS3 port has detected incoming PLCP Yellow Alarm. |
| 1.3.6.1.4.1.326.2.2.0.47 | asxDS3PLCPYellowCleared | 0 | 0 | This trap indicates that the specified DS3 port has detected clearance of incoming PLCP Yellow Alarm. |
| 1.3.6.1.4.1.326.2.2.0.48 | asxDS3PLCPLOFDetected | 0 | 0 | This trap indicates that the specified DS3 port has detected incoming PLCP LOF Alarm. |
| 1.3.6.1.4.1.326.2.2.0.49 | asxDS3PLCPLOFCleared | 0 | 0 | This trap indicates that the specified DS3 port has detected clearance of incoming PLCP LOF Alarm. |
| 1.3.6.1.4.1.326.2.2.0.50 | asxDS3LOFDetected | 0 | 0 | This trap indicates that Loss Of Frame(LOF) is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.51 | asxDS3LOFCleared | 0 | 0 | This trap indicates that Loss Of Frame is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.52 | asxDS3AISDetected | 0 | 0 | This trap indicates that AIS Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.53 | asxDS3AISCleared | 0 | 0 | This trap indicates that AIS Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.60 | asxDS1PLCPYellowDetected | 0 | 0 | This trap indicates that the specified DS1 port has detected incoming PLCP Yellow Alarm. |
| 1.3.6.1.4.1.326.2.2.0.61 | asxDS1PLCPYellowCleared | 0 | 0 | This trap indicates that the specified DS1 port has detected clearance of incoming PLCP Yellow Alarm. |
| 1.3.6.1.4.1.326.2.2.0.62 | asxDS1PLCPLOFDetected | 0 | 0 | This trap indicates that the specified DS1 port has detected incoming PLCP LOF Alarm. |
| 1.3.6.1.4.1.326.2.2.0.63 | asxDS1PLCPLOFCleared | 0 | 0 | This trap indicates that the specified DS1 port has detected clearance of incoming PLCP LOF Alarm. |
| 1.3.6.1.4.1.326.2.2.0.64 | asxDS1YellowDetected | 0 | 0 | This trap indicates that Yellow Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.65 | asxDS1YellowCleared | 0 | 0 | This trap indicates that Yellow Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.66 | asxDS1AISDetected | 0 | 0 | This trap indicates that AIS Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.67 | asxDS1AISCleared | 0 | 0 | This trap indicates that AIS Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.68 | asxDS1LOSDetected | 0 | 0 | This trap indicates that LOS Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.69 | asxDS1LOSCleared | 0 | 0 | This trap indicates that LOS Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.70 | asxDS1LOFDetected | 0 | 0 | This trap indicates that LOF Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.71 | asxDS1LOFCleared | 0 | 0 | This trap indicates that LOF Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.74 | asxDS3FERFDetected | 0 | 0 | This trap indicates that FERF Alarm or DS3 Yellow Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.75 | asxDS3FERFCleared | 0 | 0 | This trap indicates that FERF Alarm or DS3 Yellow Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.78 | asxE3YellowDetected | 0 | 0 | This trap indicates that the Yellow Alarm is being detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.79 | asxE3YellowCleared | 0 | 0 | This trap indicates that Yellow alarm has cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.80 | asxE3OOFDetected | 0 | 0 | This trap indicates that Out Of Frame (OOF) is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.81 | asxE3OOFCleared | 0 | 0 | This trap indicates that Loss Of Frame is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.82 | asxE3AtmLCDDetected | 0 | 0 | This trap indicates that the specified E3 port is experiencing Loss of Cell Deliniation (LCD). A LCD failure is declared when the… |
| 1.3.6.1.4.1.326.2.2.0.83 | asxE3AtmLCDCleared | 0 | 0 | This trap indicates that the LCD failure identified by trap asxE3AtmLCDDetected has been cleared. A LCD failure is cleared when t… |
| 1.3.6.1.4.1.326.2.2.0.86 | asxE3PLCPYellowDetected | 0 | 0 | This trap indicates that the specified E3 port has detected incoming PLCP Yellow Alarm. |
| 1.3.6.1.4.1.326.2.2.0.87 | asxE3PLCPYellowCleared | 0 | 0 | This trap indicates that the specified E3 port has detected clearance of incoming PLCP Yellow Alarm. |
| 1.3.6.1.4.1.326.2.2.0.90 | asxE1YellowDetected | 0 | 0 | This trap indicates that the Yellow Alarm is being detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.91 | asxE1YellowCleared | 0 | 0 | This trap indicates that Yellow alarm has cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.92 | asxE1LOFDetected | 0 | 0 | This trap indicates that LOF is being detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.93 | asxE1LOFCleared | 0 | 0 | This trap indicates that LOF is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.96 | asxE1PLCPYellowDetected | 0 | 0 | This trap indicates that the specified E1 port has detected incoming PLCP Yellow Alarm. |
| 1.3.6.1.4.1.326.2.2.0.97 | asxE1PLCPYellowCleared | 0 | 0 | This trap indicates that the specified E1 port has detected clearance of incoming PLCP Yellow Alarm. |
| 1.3.6.1.4.1.326.2.2.0.98 | asxE1PLCPLOFDetected | 0 | 0 | This trap indicates that the specified E1 port has detected incoming PLCP LOF Alarm. |
| 1.3.6.1.4.1.326.2.2.0.99 | asxE1PLCPLOFCleared | 0 | 0 | This trap indicates that incoming PLCP LOF alarm has been cleared on the specified E1 port. |
| 1.3.6.1.4.1.326.2.2.0.100 | asxE1LOSDetected | 0 | 0 | This trap indicates that the specified E1 port has detected incoming LOS Alarm. |
| 1.3.6.1.4.1.326.2.2.0.101 | asxE1LOSCleared | 0 | 0 | This trap indicates that incoming LOS alarm has been cleared on the specified E1 port. |
| 1.3.6.1.4.1.326.2.2.0.102 | asxE1AISDetected | 0 | 0 | This trap indicates that the specified E1 port has detected incoming AIS Alarm. |
| 1.3.6.1.4.1.326.2.2.0.103 | asxE1AISCleared | 0 | 0 | This trap indicates that incoming AIS alarm has been cleared on the specified E1 port. |
| 1.3.6.1.4.1.326.2.2.0.104 | asxE3AISDetected | 0 | 0 | This trap indicates that the specified E3 port has detected incoming AIS Alarm. |
| 1.3.6.1.4.1.326.2.2.0.105 | asxE3AISCleared | 0 | 0 | This trap indicates that incoming AIS alarm has been cleared on the specified E3 port. |
| 1.3.6.1.4.1.326.2.2.0.106 | asxE3LOSDetected | 0 | 0 | This trap indicates that the specified E3 port has detected incoming LOS Alarm. |
| 1.3.6.1.4.1.326.2.2.0.107 | asxE3LOSCleared | 0 | 0 | This trap indicates that incoming LOS alarm has been cleared on the specified E3 port. |
| 1.3.6.1.4.1.326.2.2.0.108 | asxE3PLCPLOFDetected | 0 | 0 | This trap indicates that the specified E3 port has detected incoming PLCP LOF Alarm. |
| 1.3.6.1.4.1.326.2.2.0.109 | asxE3PLCPLOFCleared | 0 | 0 | This trap indicates that incoming PLCP LOF alarm has been cleared on the specified E3 port. |
| 1.3.6.1.4.1.326.2.2.0.112 | asxJ2YellowDetected | 0 | 0 | This trap indicates that Yellow Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.113 | asxJ2YellowCleared | 0 | 0 | This trap indicates that Yellow Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.114 | asxJ2AISDetected | 0 | 0 | This trap indicates that AIS Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.115 | asxJ2AISCleared | 0 | 0 | This trap indicates that AIS Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.116 | asxJ2LOSDetected | 0 | 0 | This trap indicates that LOS Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.117 | asxJ2LOSCleared | 0 | 0 | This trap indicates that LOS Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.118 | asxJ2LOFDetected | 0 | 0 | This trap indicates that LOF Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.119 | asxJ2LOFCleared | 0 | 0 | This trap indicates that LOF Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.120 | asxDS3LOSDetected | 0 | 0 | This trap indicates that the specified DS3 port has detected incoming LOS Alarm. |
| 1.3.6.1.4.1.326.2.2.0.121 | asxDS3LOSCleared | 0 | 0 | This trap indicates that the incoming LOS Alarm has been cleared on the specified DS3 port. |
| 1.3.6.1.4.1.326.2.2.0.130 | asxSonetLOFDetected | 0 | 0 | This trap indicates that the specified SONET port is experiencing Loss Of Frame (LOF) failure. An LOF failure is declared when th… |
| 1.3.6.1.4.1.326.2.2.0.131 | asxSonetLOFCleared | 0 | 0 | This trap indicates that the LOF failure identified by trap asxSonetLOFDetected has been cleared. The LOF failure is cleared when… |
| 1.3.6.1.4.1.326.2.2.0.132 | asxSonetLineRDIDetected | 0 | 0 | This trap indicates that the specified SONET port is experiencing Line Remote Defect Indication (LRDI). A Line RDI failure is dec… |
| 1.3.6.1.4.1.326.2.2.0.133 | asxSonetLineRDICleared | 0 | 0 | This trap indicates that the Line RDI failure identified by trap asxSonetLineRDIDetected has been cleared. The Line RDI failure … |
| 1.3.6.1.4.1.326.2.2.0.134 | asxSonetPathAISDetected | 0 | 0 | This trap indicates that the specified SONET port is experiencing Path Alarm Inidication Signal (PAIS). A Path AIS failure is dec… |
| 1.3.6.1.4.1.326.2.2.0.135 | asxSonetPathAISCleared | 0 | 0 | This trap indicates that the PathAIS failure identified by trap asxSonetPathAISDetected has been cleared. A PAIS failure is clea… |
| 1.3.6.1.4.1.326.2.2.0.136 | asxSonetPathLOPDetected | 0 | 0 | This trap indicates that the specified SONET port is experiencing Loss Of Pointer (LOP). A LOP failure is declared when the LOP d… |
| 1.3.6.1.4.1.326.2.2.0.137 | asxSonetPathLOPCleared | 0 | 0 | This trap indicates that the LOP failure identified by trap asxSonetLOPDetected has been cleared. A LOP failure is cleared when t… |
| 1.3.6.1.4.1.326.2.2.0.138 | asxSonetPathUNEQDetected | 0 | 0 | This trap indicates that the specified SONET port is experiencing unequiped (UNEQ). A UNEQ failure is declared when the UNEQ defe… |
| 1.3.6.1.4.1.326.2.2.0.139 | asxSonetPathUNEQCleared | 0 | 0 | This trap indicates that the UNEQ failure identified by trap asxSonetUNEQDetected has been cleared. A UNEQ failure is cleared whe… |
| 1.3.6.1.4.1.326.2.2.0.140 | asxSonetPathRDIDetected | 0 | 0 | This trap indicates that the specified SONET port is experiencing Path Remote Defect Indication (PRDI). A Path RDI failure is dec… |
| 1.3.6.1.4.1.326.2.2.0.141 | asxSonetPathRDICleared | 0 | 0 | This trap indicates that the Path RDI failure identified by trap asxSonetPathRDIDetected has been cleared. The Path RDI failure … |
| 1.3.6.1.4.1.326.2.2.0.142 | asxSonetAtmLCDDetected | 0 | 0 | This trap indicates that the specified SONET port is experiencing Loss of Cell Deliniation (LCD). A LCD failure is declared when … |
| 1.3.6.1.4.1.326.2.2.0.143 | asxSonetAtmLCDCleared | 0 | 0 | This trap indicates that the LCD failure identified by trap asxSonetAtmLCDDetected has been cleared. A LCD failure is cleared whe… |
| 1.3.6.1.4.1.326.2.2.0.144 | asxSonetAtmLineBIPDetected | 0 | 0 | This trap indicates that the specified SONET port is experiencing Bit Interleaved Parity (BIP) errors. A Line BIP failure is decl… |
| 1.3.6.1.4.1.326.2.2.0.145 | asxSonetAtmLineBIPCleared | 0 | 0 | This trap indicates that the Line BIP failure identified by trap asxSonetAtmLineBIPDetected has been cleared. A Line BIP failure … |
| 1.3.6.1.4.1.326.2.2.0.160 | asxDS3IdleDetected | 0 | 0 | This trap indicates that an Idle Maintenance Signal (IDLE) is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.161 | asxDS3IdleCleared | 0 | 0 | This trap indicates that an Idle Maintenance Signal (IDLE) is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.162 | asxDS3AtmLCDDetected | 0 | 0 | This trap indicates that the specified DS3 port is experiencing Loss of Cell Deliniation (LCD). A LCD failure is declared when th… |
| 1.3.6.1.4.1.326.2.2.0.163 | asxDS3AtmLCDCleared | 0 | 0 | This trap indicates that the LCD failure identified by trap asxDS3AtmLCDDetected has been cleared. A LCD failure is cleared when … |
| 1.3.6.1.4.1.326.2.2.0.164 | asxDS3PbitPerrDetected | 0 | 0 | This trap indicates that the specified DS3 port is experiencing P-bit Parity errors. A P-bit Parity Error failure is declared whe… |
| 1.3.6.1.4.1.326.2.2.0.165 | asxDS3PbitPerrCleared | 0 | 0 | This trap indicates that the P-bit Parity Error failure identified by trap asxDS3PbitPerrDetected has been cleared. A P-bit Parit… |
| 1.3.6.1.4.1.326.2.2.0.176 | asxDS1PRBSDetected | 0 | 0 | This trap indicates that PRBS pattern is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.177 | asxDS1PRBSCleared | 0 | 0 | This trap indicates that PRBS pattern is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.178 | asxDS1AtmLCDDetected | 0 | 0 | This trap indicates that the specified DS1 port is experiencing Loss of Cell Deliniation (LCD). A LCD failure is declared when th… |
| 1.3.6.1.4.1.326.2.2.0.179 | asxDS1AtmLCDCleared | 0 | 0 | This trap indicates that the LCD failure identified by trap asxDS1AtmLCDDetected has been cleared. A LCD failure is cleared when … |
| 1.3.6.1.4.1.326.2.2.0.180 | asxDS1CRCErrDetected | 0 | 0 | This trap indicates that the specified DS1 port is experiencing excessive CRC-6 errors. A CRC-6 Error failure is declared when th… |
| 1.3.6.1.4.1.326.2.2.0.181 | asxDS1CRCErrCleared | 0 | 0 | This trap indicates that the excessive CRC-6 Error failure identified by trap asxDS1CRCErrDetected has been cleared. A CRC-6 Pari… |
| 1.3.6.1.4.1.326.2.2.0.192 | asxE3TrailChangeDetected | 0 | 0 | This trap indicates that a change in the trail trace message was detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.208 | asxE1AtmLCDDetected | 0 | 0 | This trap indicates that the specified E1 port is experiencing Loss of Cell Deliniation (LCD). A LCD failure is declared when the… |
| 1.3.6.1.4.1.326.2.2.0.209 | asxE1AtmLCDCleared | 0 | 0 | This trap indicates that the LCD failure identified by trap asxE1AtmLCDDetected has been cleared. A LCD failure is cleared when t… |
| 1.3.6.1.4.1.326.2.2.0.224 | asxJ2RLOCDetected | 0 | 0 | This trap indicates that Receive Loss of Clock (RLOC) is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.225 | asxJ2RLOCCleared | 0 | 0 | This trap indicates that Receive Loss of Clock (RLOC) is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.226 | asxJ2HBERDetected | 0 | 0 | This trap indicates that High Bit Error Rate (HBER) is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.227 | asxJ2HBERCleared | 0 | 0 | This trap indicates that High Bit Error Rate (HBER) is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.228 | asxJ2PAISDetected | 0 | 0 | This trap indicates that Payload Alarm Indication Signal (PAIS) is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.229 | asxJ2PAISCleared | 0 | 0 | This trap indicates that Payload Alarm Indication SIgnal (PAIS) is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.230 | asxJ2AtmLCDDetected | 0 | 0 | This trap indicates that the specified J2 port is experiencing Loss of Cell Deliniation (LCD). A LCD failure is declared when the… |
| 1.3.6.1.4.1.326.2.2.0.231 | asxJ2AtmLCDCleared | 0 | 0 | This trap indicates that the LCD failure identified by trap asxJ2AtmLCDDetected has been cleared. A LCD failure is cleared when t… |
| 1.3.6.1.4.1.326.2.2.0.232 | asxJ2TLOCDetected | 0 | 0 | This trap indicates that Transmit Loss of Clock (TLOC) is detected. |
| 1.3.6.1.4.1.326.2.2.0.233 | asxJ2TLOCCleared | 0 | 0 | This trap indicates that Transmit Loss of Clock (TLOC) is cleared. |
| 1.3.6.1.4.1.326.2.2.0.250 | asxTP25LOSDetected | 0 | 0 | This trap indicates that LOS Alarm is detected on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.251 | asxTP25LOSCleared | 0 | 0 | This trap indicates that LOS Alarm is cleared on the incoming signal. |
| 1.3.6.1.4.1.326.2.2.0.1024 | asxOutputQueueCongested | 0 | 0 | This trap indicates that the output queue for the given priority has exceeded its dedicated length, and has begun overflowing int… |
| 1.3.6.1.4.1.326.2.2.0.1025 | asxOutputQueueCellLoss | 0 | 0 | This trap indicates that the output queue for the given priority has overflowed and cells have been dropped. |
| 1.3.6.1.4.1.326.2.2.0.1026 | asxExtendedModeViolation | 0 | 0 | This trap indicates that a series A or B network module was inserted into a switch board running in extended mode. Multicast wil… |
| 1.3.6.1.4.1.326.2.2.0.1027 | asxNonextendedModeWarning | 0 | 0 | This trap indicates that a series C or greater network module was inserted into a switch board running in non-extended mode. |
| 1.3.6.1.4.1.326.2.2.0.1029 | crConfMemoryOflow | 0 | 0 | This trap is generated when the allocated callrecord memory(as indicated by crMemoryAllocated) is exceeded. |
| 1.3.6.1.4.1.326.2.2.0.1030 | crXfrPrimaryXfrFailed | 0 | 0 | This trap is generated when the call record transfer to the primary host(as indicated by crXfrPrimaryUrl) fails. |
| 1.3.6.1.4.1.326.2.2.0.1031 | crXfrSecondaryXfrFailed | 0 | 0 | This trap is generated when the call record transfer to the secondary host(as indicated by crXfrSecondaryUrl) fails. |
| 1.3.6.1.4.1.326.2.2.0.1032 | crConfMemAllocFail | 0 | 0 | This trap is generated when Callrecord functionality is unable to allocate memory as specified by crMemoryAllocated. This can hap… |
| 1.3.6.1.4.1.326.2.2.0.1033 | crGeneralFailure | 0 | 0 | This trap is generated when any of the callrecord related functionality fails for any reason. One example would be when the Callr… |
| 1.3.6.1.4.1.326.2.2.0.1034 | asxDualScpSyncFailure | 0 | 0 | This trap indicates that automatic CDB synchronization is disabled due to failures. |
| 1.3.6.1.4.1.326.2.2.0.1035 | asxDualScpSwitchOver | 0 | 0 | This trap indicates that the backup SCP has taken control of the switch. |
| 1.3.6.1.4.1.326.2.2.0.1036 | asxDualScpHotSwap | 0 | 0 | This trap indicates that an SCP hotswap insertion or removal has occurred. |
| 1.3.6.1.4.1.326.2.2.0.1037 | asxVPAISDetected | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) is detected on the incoming (terminating) virtual path. This trap is … |
| 1.3.6.1.4.1.326.2.2.0.1038 | asxVPAISCleared | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) has been removed from the incoming (terminating) virtual path. This tr… |
| 1.3.6.1.4.1.326.2.2.0.1039 | asxVPRDIDetected | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) is detected on the incoming (terminating) virtual path. This trap is… |
| 1.3.6.1.4.1.326.2.2.0.1040 | asxVPRDICleared | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) has been removed from the incoming (terminating) virtual path. This t… |
| 1.3.6.1.4.1.326.2.2.0.1041 | asxNonextendedModeViolation | 0 | 0 | This trap indicates that a series D network module was inserted into a switch board running in non-extended mode. Multicast will… |
| 1.3.6.1.4.1.326.2.2.0.1042 | asxUnsupportedNetworkModule | 0 | 0 | This trap indicates that a unsupported network module was inserted into a switch. |
| 1.3.6.1.4.1.326.2.2.0.1043 | asxDualScpRedundancy | 0 | 0 | This trap indicates that there is a change in the state of dual SCP Redundancy. |
| 1.3.6.1.4.1.326.2.2.0.1049 | asxIpFilterViolation | 0 | 0 | An asxIpFilterViolation trap occurs when an incoming IP packet is unauthorized to enter the switch control port and has been drop… |
| 1.3.6.1.4.1.326.2.2.0.1050 | ecpOperatingModeChange | 0 | 0 | This trap indicates that the Extended Control Processor (ECP) has change operating state. |
| 1.3.6.1.4.1.326.2.2.0.1051 | esiTimingSourceChange | 0 | 0 | This trap is generated whenever the External Synchronization Interface (ESI) timing source (esiCurrentTimingRef) is changed eithe… |
| 1.3.6.1.4.1.326.2.2.0.1052 | esiTimingSourceFailed | 0 | 0 | This trap is generated whenever the External Synchronization Interface (ESI) timing source (esiCurrentTimingRef) fails. |
| 1.3.6.1.4.1.326.2.2.0.1053 | q2931AFRejectKnown | 0 | 0 | This trap is generated whenever any q2931 UNI with Address Filtering enabled rejects a Setup request because the request matched … |
| 1.3.6.1.4.1.326.2.2.0.1054 | q2931AFRejectUnknown | 0 | 0 | This trap is generated whenever any q2931 UNI with Address Filtering enabled rejects a Setup request because the address matched … |
| 1.3.6.1.4.1.326.2.2.0.1061 | q2931CreationFailure | 0 | 0 | This trap is generated whenever a switch fails to create a UNI. This is most likely due to a resource limitation on the switch. |
| 1.3.6.1.4.1.326.2.2.0.1068 | asxPsCurrentDown | 0 | 0 | This trap alerts that one ATM switch power supply had a curent failure. The power supply that failed is identified by the power s… |
| 1.3.6.1.4.1.326.2.2.0.1069 | asxPsCurrentUp | 0 | 0 | This trap alerts that one ATM switch power supply that had a curent failure is now up. The power supply that is back up is identi… |
| 1.3.6.1.4.1.326.2.2.0.1070 | asxPs5VoltDown | 0 | 0 | This trap alerts that one ATM switch power supply had a +5V failure. The power supply that failed is identified by the power supp… |
| 1.3.6.1.4.1.326.2.2.0.1071 | asxPs5VoltUp | 0 | 0 | This trap alerts that one ATM switch power supply that had a +5V failure is now up. The power supply that is back up is identifie… |
| 1.3.6.1.4.1.326.2.2.0.1072 | asxSwitchLoginDetected | 0 | 0 | An asxSwitchLoginDetected trap signifies that a user logged in on the switch. |
| 1.3.6.1.4.1.326.2.2.0.1073 | asxSwitchLoginFailed | 0 | 0 | An asxSwitchLoginFailed trap signifies that a user's attempt to log in on the switch failed. |
| 1.3.6.1.4.1.326.2.2.0.1074 | pnniTdbGuardbandResrvFail | 0 | 0 | This trap is generated when guardband memory reserve for any of the PNNI TDB(Topology Database) related functionalites like creat… |
| 1.3.6.1.4.1.326.2.2.0.1075 | pnniTdbInconsistentState | 0 | 0 | This trap is generated when PNNI TDB(Topology Database) is in an unrecoverable error condition due to MALLOC and other TDB relate… |
| 1.3.6.1.4.1.326.2.2.0.1076 | ecpStandbyFailed | 0 | 0 | This trap is generated whenever the Standby Timing Control Module (TCM) appears to haved failed. This is determined by lack of r… |
| 1.3.6.1.4.1.326.2.2.0.1077 | asxShmem2OutputQueueCongested | 0 | 0 | This trap indicates that the output queue for the given priority has exceeded its dedicated length, and has begun overflowing int… |
| 1.3.6.1.4.1.326.2.2.0.1078 | asxShmem2OutputQueueCellLoss | 0 | 0 | This trap indicates that the output queue for the given priority has overflowed and cells have been dropped. |
| 1.3.6.1.4.1.326.2.2.0.1080 | fabricLvl3Lookup | 0 | 0 | This trap is generated when a fabric detects excessive level 3 lookup errors. The level 3 lookup count is read every second. If t… |
| 1.3.6.1.4.1.326.2.2.0.1081 | fabricCorrectedLookup | 0 | 0 | This trap is generated when the SCP detects inconsistant information in the HDCOMP lookup. The switch has corrected the bad infor… |
| 1.3.6.1.4.1.326.2.2.0.1090 | spvcRerouteInitiated | 0 | 0 | This trap is sent when a SPVC is being re-routed due to a better path being found. |
| 1.3.6.1.4.1.326.2.2.0.1091 | asxQ2931Down | 0 | 0 | This trap is generated whenever UNI signalling goes down. |
| 1.3.6.1.4.1.326.2.2.0.1092 | asxQ2931Up | 0 | 0 | This trap is generated whenever UNI signalling goes up. |
| 1.3.6.1.4.1.326.2.2.0.1093 | asxFabricDown | 0 | 0 | An asxFabricDown trap signifies that the sending protocol entity recognizes a failure in one of the ATM Switch fabric, that is id… |
| 1.3.6.1.4.1.326.2.2.0.1094 | asxFabricUp | 0 | 0 | An asxFabricUp trap signifies that the sending protocol entity recognizes a new operational ATM Switch fabric, that is identified… |
| 1.3.6.1.4.1.326.2.2.0.1095 | asxQ2931CallClearing | 0 | 0 | This trap is generated whenever calls are cleared in a signalling interface for the following reasons. * Carrier loss * SONET alar… |
| 1.3.6.1.4.1.326.2.2.0.2000 | frf8PVCStatus | 0 | 0 | This trap indicates when an interworking PVC has experienced an alarmed condition, either on the ATM network side or Frame Relay … |
| 1.3.6.1.4.1.326.2.2.0.2003 | framNakMsg | 0 | 0 | This trap is sent when a message from the SCP to the FRAM netmod does not succeed. |
| 1.3.6.1.4.1.326.2.2.0.2004 | pnniSpvccDown | 0 | 0 | This trap is sent when a SPVC call is cleared or deleted. The pnniSpvcSrcDownReason indicates if the call was cleared due to a be… |
| 1.3.6.1.4.1.326.2.2.0.2005 | pnniSpvccUp | 0 | 0 | This trap is send when a SPVC call is established. It identifies the SPVC and the old and new cost. If the call has not been up b… |
| 1.3.6.1.4.1.326.2.2.0.2006 | pnniSpvccFail | 0 | 0 | This trap is sent when a SPVC call that is down fails to get connected on 16 consecutive attempts. This trap is only sent if pnni… |
| 1.3.6.1.4.1.326.2.2.0.2007 | pnniSpvpcDown | 0 | 0 | This trap is sent when a SPVP call is cleared. The pnniSpvcSrcDownReason indicates if the call was cleared due to a better route … |
| 1.3.6.1.4.1.326.2.2.0.2008 | pnniSpvpcUp | 0 | 0 | This trap is send when a SPVP call is established. It identifies the SPVP and the old and new cost. If the call has not been up b… |
| 1.3.6.1.4.1.326.2.2.0.2009 | pnniSpvpcFail | 0 | 0 | This trap is sent when a SPVP call that is down fails to get connected on 16 consecutive attempts. This trap is only sent if pnni… |
| 1.3.6.1.4.1.326.2.2.0.2010 | asxPortCardDown | 0 | 0 | An asxPortCardDown trap signifies that the sending protocol entity recognizes a failure in one of the ATM Switch portcards, that … |
| 1.3.6.1.4.1.326.2.2.0.2011 | asxPortCardUp | 0 | 0 | An asxPortCardUp trap signifies that the sending protocol entity recognizes a new operational ATM Switch port card, that is ident… |
| 1.3.6.1.4.1.326.2.2.0.2013 | asxServiceCategoryOutputQueueCongested | 0 | 0 | This trap indicates that the output queue for the service category has exceeded its dedicated length, and has begun overflowing i… |
| 1.3.6.1.4.1.326.2.2.0.2014 | asxServiceCategoryOutputQueueCellLoss | 0 | 0 | This trap indicates that the output queue for the given service category has overflowed and cells have been dropped. |
| 1.3.6.1.4.1.326.2.2.0.2015 | pnniNormalToOverloadTransition | 0 | 0 | This trap is generated on transition from the normal state to the overload state. |
| 1.3.6.1.4.1.326.2.2.0.2016 | pnniOverloadToNormalTransition | 0 | 0 | This trap is generated on transition from the overload to the normal state. |
| 1.3.6.1.4.1.326.2.2.0.2017 | apsSwitchOver | 0 | 0 | This trap alerts that an aps switchover has occurred and the active port is identified by the tuple {hwPortBoard, hwPortModule, h… |
| 1.3.6.1.4.1.326.2.2.0.2018 | redundancyFabricSwitchover | 0 | 0 | This trap reports the change of active fabric due to an automatic or revertive switchover. The fabric identified by the trap vari… |
| 1.3.6.1.4.1.326.2.2.0.2019 | apsModeMismatchDeclare | 0 | 0 | This trap alerts that an aps mode mismatch has occurred on aps group. |
| 1.3.6.1.4.1.326.2.2.0.2020 | pnniPmpRerouteInitiated | 0 | 0 | This trap is sent when a party is being re-routed due to a better path being found or if a reroute is requested using a AMI comm… |
| 1.3.6.1.4.1.326.2.2.0.2021 | pnniPmpSpvcUp | 0 | 0 | This trap is send when a pmp SPVC call is established. This trap is only sent if pnniSpvcTrapMode is failure or all. |
| 1.3.6.1.4.1.326.2.2.0.2022 | pnniPmpSpvcDown | 0 | 0 | This trap is sent when a pmp SPVC call is cleared. The pnniSpvcSrcDownReason indicates if the call was cleared due to a better ro… |
| 1.3.6.1.4.1.326.2.2.0.2023 | pnniPmpSpvcFail | 0 | 0 | This trap is sent when a SPVC call that is down fails to get connected on 16 consecutive attempts. This trap is only sent if pnni… |
| 1.3.6.1.4.1.326.2.2.0.2024 | pnniSpvxRGroupSwover | 0 | 0 | This trap is sent when a automatic switch over occurs in a SPVC Redundancy group that has automatic PVC switch over enabled. |
| 1.3.6.1.4.1.326.2.2.0.2025 | asxSVXCPStateTransferFailed | 0 | 0 | This trap is sent when the SVx/SPVx Preservation module is unable to transfer call and interface state information to the Standby… |
| 1.3.6.1.4.1.326.2.2.0.2026 | asxSVXCPStateTransferRestarted | 0 | 0 | This trap is sent when the SVx/SPVx Preservation module has restarted its transfer of call and interface state information to the… |
| 1.3.6.1.4.1.326.2.2.0.2027 | asxSVXCPStateDroppedCall | 0 | 0 | This trap is sent when the SVx/SPVx Preservation module has insufficient memory to store one or more calls during its transfer of… |
| 1.3.6.1.4.1.326.2.2.0.2028 | apsModeMismatchClear | 0 | 0 | This trap alerts that an aps mode mismatch has cleared on aps group. |
| 1.3.6.1.4.1.326.2.2.0.2040 | elecredSwitchOver | 0 | 0 | This trap alerts that an electrical redundancy switchover has occurred and the active port is identified by the tuple {hwPortBoa… |
| 1.3.6.1.4.1.326.2.2.0.2050 | asxVPOAMAISDetected | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) is detected on the incoming (terminating) virtual path. This trap is … |
| 1.3.6.1.4.1.326.2.2.0.2051 | asxVPOAMAISCleared | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) has been removed from the incoming (terminating) virtual path. This tr… |
| 1.3.6.1.4.1.326.2.2.0.2052 | asxVPOAMRDIDetected | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) is detected on the incoming (terminating) virtual path. This trap is… |
| 1.3.6.1.4.1.326.2.2.0.2053 | asxVPOAMRDICleared | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) has been removed from the incoming (terminating) virtual path. This t… |
| 1.3.6.1.4.1.326.2.2.0.2054 | asxVCOAMAISDetected | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) is detected on the incoming virtual channel. This trap is generated o… |
| 1.3.6.1.4.1.326.2.2.0.2055 | asxVCOAMAISCleared | 0 | 0 | This trap indicates that the Alarm Indication Signal (AIS) has been removed from the incoming virtual channel. This trap is gene… |
| 1.3.6.1.4.1.326.2.2.0.2056 | asxVCOAMRDIDetected | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) is detected on the incoming virtual channel. This trap is generated … |
| 1.3.6.1.4.1.326.2.2.0.2057 | asxVCOAMRDICleared | 0 | 0 | This trap indicates that the Remote Defect Indication (RDI) has been removed from the incoming virtual channel. This trap is gen… |
| 1.3.6.1.4.1.326.2.2.0.2058 | asxVCOAMCLR0HitThreshold | 0 | 0 | The F5 CP sends this trap when the CLR0 threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2059 | asxVCOAMCLR1HitThreshold | 0 | 0 | The F5 CP sends this trap when the CLR1 threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2060 | asxVCOAMCLR01HitThreshold | 0 | 0 | The F5 CP sends this trap when the CLR0+1 threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2061 | asxVCOAMRogueCellHitThreshold | 0 | 0 | The F5 CP sends this trap when the rogue cells count threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2062 | asxVCOAMErroredCellHitThreshold | 0 | 0 | The F5 CP sends this trap when the errored cells count threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2063 | asxVCOAMBip16Threshold | 0 | 0 | The F5 CP sends this trap when even parity is detected in Block Error Detection Code BIP-16. Ref: ITU I.610 paragraph 10.3.1 Item… |
| 1.3.6.1.4.1.326.2.2.0.2064 | asxVPOAMCLR0HitThreshold | 0 | 0 | The F4 CP sends this trap when the CLR0 threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2065 | asxVPOAMCLR1HitThreshold | 0 | 0 | The F4 CP sends this trap when the CLR1 threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2066 | asxVPOAMCLR01HitThreshold | 0 | 0 | The F4 CP sends this trap when the CLR0+1 threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2067 | asxVPOAMRogueCellHitThreshold | 0 | 0 | The F4 CP sends this trap when the rogue cells count threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2068 | asxVPOAMErroredCellHitThreshold | 0 | 0 | The F4 CP sends this trap when the errored cells count threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2069 | asxVPOAMBip16Threshold | 0 | 0 | The F4 CP sends a VP trap when even parity is detected in Block Error Detection Code BIP-16. Ref: ITU I.610 paragraph 10.3.1 Item… |
| 1.3.6.1.4.1.326.2.2.0.2070 | asxVCOAMSecbrHitThreshold | 0 | 0 | The F5 CP sends this trap when the SECBR threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2071 | asxVPOAMSecbrHitThreshold | 0 | 0 | The F4 CP sends this trap when the SECBR threshold is hit. |
| 1.3.6.1.4.1.326.2.2.0.2072 | asxVCOAMActivated | 0 | 0 | This trap indicates that a F5 CP has been activated. It also reports the status of the activation. |
| 1.3.6.1.4.1.326.2.2.0.2073 | asxVCOAMDeactivated | 0 | 0 | This trap indicates that a F5 CP has been deactivated. It also reports the status of the deactivation. |
| 1.3.6.1.4.1.326.2.2.0.2074 | asxVPOAMActivated | 0 | 0 | This trap indicates that a F4 CP has been activated. It also reports the status of the activation. |
| 1.3.6.1.4.1.326.2.2.0.2075 | asxVPOAMDeactivated | 0 | 0 | This trap indicates that a F4 CP has been deactivated. It also reports the status of the deactivation. |
| 1.3.6.1.4.1.326.2.2.0.2076 | asxVCOAMCriticalMcsnJump | 0 | 0 | The F5 CP sends this trap when there is a critical jump in MCSN received from the peer CP. This indicates a lost in some of the … |
| 1.3.6.1.4.1.326.2.2.0.2077 | asxVPOAMCriticalMcsnJump | 0 | 0 | The F4 CP sends this trap when there is a critical jump in MCSN received from the peer CP. This indicates a lost in some of the … |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1 | hardware | 14 | 2193 | None |
| 1.3.6.1.4.1.326.2.2.2 | software | 5 | 1869 | None |
| 1.3.6.1.4.1.326.2.2.4 | asx200wg | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.5 | asx200bx | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.6 | asx200bxe | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.7 | cabletron9A000 | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.8 | asx1000 | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.9 | le155 | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.10 | sfcs200wg | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.11 | sfcs200bx | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.12 | sfcs1000 | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.15 | tnx210 | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.16 | tnx1100 | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.17 | asx1200 | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.18 | asx4000 | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.19 | le25 | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.20 | esx3000 | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.21 | tnx1100b | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.22 | asx150 | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.24 | bxr48000 | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.25 | asx4000m | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.26 | axhIp | 0 | 0 | None |
| 1.3.6.1.4.1.326.2.2.27 | axhSig | 0 | 0 | None |