Vendor: Marconi
Module: Fore-PPP-TUNNEL-MIB (fore-ppp-tunnel.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
forePppTunnelIfGroup OBJECT IDENTIFIER ::= { asx 26 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.26.1 | forePppTunnelIfTable | 1 | 2 | forePppTunnelIftable |
| 1.3.6.1.4.1.326.2.2.1.1.26.2 | forePppTunnelIwfStatsTable | 1 | 11 | A table containing PppTunnelIwf IWF interface Statistics |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.1 | boardGroup | 6 | 113 | None |
| 1.3.6.1.4.1.326.2.2.1.1.2 | moduleGroup | 6 | 80 | None |
| 1.3.6.1.4.1.326.2.2.1.1.3 | foreDs3 | 2 | 69 | This MIB module supports the FORE DS3 port module. |
| 1.3.6.1.4.1.326.2.2.1.1.4 | foreSonetModule | 2 | 78 | The implementation of the foreSonet tables is mandatory for all switches that have SONET/SDH port modules. |
| 1.3.6.1.4.1.326.2.2.1.1.5 | foreE3 | 2 | 57 | write something interesting here |
| 1.3.6.1.4.1.326.2.2.1.1.6 | foreJ2 | 2 | 35 | write something interesting here |
| 1.3.6.1.4.1.326.2.2.1.1.7 | foreDs1 | 2 | 66 | Fore DS1 mib module for supporting the DS1 port module. |
| 1.3.6.1.4.1.326.2.2.1.1.8 | foreE1 | 2 | 55 | This mib implements management tables for the E1 port module. |
| 1.3.6.1.4.1.326.2.2.1.1.9 | foreTP25Module | 2 | 24 | The foreTP25 Module supports all switchs that have the 25.6Mbps UTP/STP port module. |
| 1.3.6.1.4.1.326.2.2.1.1.10 | foreDsx1 | 3 | 41 | MIB module for supporting the DSX1 port module. |
| 1.3.6.1.4.1.326.2.2.1.1.11 | channelControlGroup | 1 | 3 | This mib is used to configure channelized operating modes for interfaces that can operate in either channelized or concatenated m… |
| 1.3.6.1.4.1.326.2.2.1.1.12 | foreTcMib | 5 | 32 | This mib implements management information for the ATM traffic convergence layer in an atm interface. |
| 1.3.6.1.4.1.326.2.2.1.1.13 | forePlcpMib | 5 | 32 | This mib implements management information for the PLCP convergence layer in an atm interface. Typically PLCP framing is used to … |
| 1.3.6.1.4.1.326.2.2.1.1.14 | foreSonetMib | 10 | 205 | This mib implements extensions to the standard SONET mib to support extra configuration and statistics that are supported by Fore… |
| 1.3.6.1.4.1.326.2.2.1.1.15 | foreDsx3Mib | 5 | 54 | This mib module implements extensions to the standard DS3 mib to support extra configuration, statistics, and diagnostic capabili… |
| 1.3.6.1.4.1.326.2.2.1.1.16 | foreAps | 2 | 31 | SONET APS |
| 1.3.6.1.4.1.326.2.2.1.1.17 | redPortConfModule | 2 | 11 | This module specifics Series D Portcard Redundancy table mib objects. |
| 1.3.6.1.4.1.326.2.2.1.1.18 | bxr48000RedConfModule | 3 | 34 | Redundancy-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.19 | foreImaExtMib | 3 | 17 | This MIB defines extensions to the standard ATM-FORUM IMA MIB to facilitate extended IMA configurations supported by Marconi. |
| 1.3.6.1.4.1.326.2.2.1.1.20 | foreHdlcIfGroup | 3 | 17 | None |
| 1.3.6.1.4.1.326.2.2.1.1.21 | foreFastGroup | 2 | 16 | None |
| 1.3.6.1.4.1.326.2.2.1.1.22 | foreIwfGroup | 1 | 12 | None |
| 1.3.6.1.4.1.326.2.2.1.1.23 | forePppIfGroup | 4 | 25 | None |
| 1.3.6.1.4.1.326.2.2.1.1.24 | foreElecRedMib | 1 | 8 | Fore-ElecRed-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.25 | foreIprIfGroup | 1 | 13 | None |
| 1.3.6.1.4.1.326.2.2.1.1.35 | foreDs0BundleExtMib | 1 | 5 | Fore-ds0-bundle-ext-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.37 | foreRfc3020ExtMib | 2 | 9 | Fore-rfc3020-ext-MIB |
| 1.3.6.1.4.1.326.2.2.1.1.38 | foreEntityExtMib | 8 | 16 | Fore-ENTITY-EXT-MIB |