Number of BIP-8 (Bit Interleaved Parity - 8) error events. The
BIP-8 is calculated over the Path Overhead field and the
associated ATM cell of the previous frame. A BIP-N is a method
of error monitoring. An N bit code is generated by the
transmitting equipment in such a manner that the first bit of
the code provides even parity over the first bit of all N-bit
sequences in the previous VT SPE, the second bit provides even
parity over the second bits of all N-bit sequences within the
specified portion, etc.
Parsed from file fore-ds3.mib.txt
Company: None
Module: Fore-DS3-MIB
Number of BIP-8 (Bit Interleaved Parity - 8) error events. The
BIP-8 is calculated over the Path Overhead field and the
associated ATM cell of the previous frame. A BIP-N is a method
of error monitoring. An N bit code is generated by the
transmitting equipment in such a manner that the first bit of
the code provides even parity over the first bit of all N-bit
sequences in the previous VT SPE, the second bit provides even
parity over the second bits of all N-bit sequences within the
specified portion, etc.
Parsed from file Fore-DS3-MIB.mib
Module: Fore-DS3-MIB
Vendor: Fore Systems, Inc.
Module: Fore-DS3-MIB
[Automatically extracted from oidview.com]
ds3PlcpBIP8s OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of BIP-8 (Bit Interleaved Parity - 8) error events. The BIP-8 is calculated over the Path Overhead field and the associated ATM cell of the previous frame. A BIP-N is a method of error monitoring. An N bit code is generated by the transmitting equipment in such a manner that the first bit of the code provides even parity over the first bit of all N-bit sequences in the previous VT SPE, the second bit provides even parity over the second bits of all N-bit sequences within the specified portion, etc." ::= { ds3PlcpEntry 6 }
ds3PlcpBIP8s OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of BIP-8 (Bit Interleaved Parity - 8) error events. The BIP-8 is calculated over the Path Overhead field and the associated ATM cell of the previous frame. A BIP-N is a method of error monitoring. An N bit code is generated by the transmitting equipment in such a manner that the first bit of the code provides even parity over the first bit of all N-bit sequences in the previous VT SPE, the second bit provides even parity over the second bits of all N-bit sequences within the specified portion, etc." ::= { ds3PlcpEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.1 | ds3PlcpBoard | 0 | 0 | The index of this port's switch board. |
1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.2 | ds3PlcpModule | 0 | 0 | The network module of this port. |
1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.3 | ds3PlcpPort | 0 | 0 | The number of this port. |
1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.4 | ds3PlcpFERRs | 0 | 0 | Number of Physical Layer Convergence Protocol (PLCP) octet error events. |
1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.5 | ds3PlcpLOFs | 0 | 0 | The number of seconds in which Loss Of Frame (LOF) errors were detected by the PLCP (Physical Layer Convergence Protocol) receive… |
1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.7 | ds3PlcpFEBEs | 0 | 0 | Number of ATM Far End Block Error (FEBE) events. |
1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.8 | ds3PlcpYellows | 0 | 0 | The number of seconds in which Yellow alarm errors were detected by the PLCP (Physical Layer Convergence Protocol) receiver. Yell… |