The number of seconds in which Yellow alarm errors were
detected by the PLCP (Physical Layer Convergence Protocol)
receiver. Yellow alarm is asserted when 10 consecutive yellow
signal bits are set to logical 1. Yellow signals are used to
alert upstream terminals of a downstream failure in order to
initiate trunk conditioning on the failure circuit.
Parsed from file fore-ds3.mib.txt
Company: None
Module: Fore-DS3-MIB
The number of seconds in which Yellow alarm errors were
detected by the PLCP (Physical Layer Convergence Protocol)
receiver. Yellow alarm is asserted when 10 consecutive yellow
signal bits are set to logical 1. Yellow signals are used to
alert upstream terminals of a downstream failure in order to
initiate trunk conditioning on the failure circuit.
Parsed from file Fore-DS3-MIB.mib
Module: Fore-DS3-MIB
Vendor: Fore Systems, Inc.
Module: Fore-DS3-MIB
[Automatically extracted from oidview.com]
ds3PlcpYellows OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds in which Yellow alarm errors were detected by the PLCP (Physical Layer Convergence Protocol) receiver. Yellow alarm is asserted when 10 consecutive yellow signal bits are set to logical 1. Yellow signals are used to alert upstream terminals of a downstream failure in order to initiate trunk conditioning on the failure circuit." ::= { ds3PlcpEntry 8 }
ds3PlcpYellows OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds in which Yellow alarm errors were detected by the PLCP (Physical Layer Convergence Protocol) receiver. Yellow alarm is asserted when 10 consecutive yellow signal bits are set to logical 1. Yellow signals are used to alert upstream terminals of a downstream failure in order to initiate trunk conditioning on the failure circuit." ::= { ds3PlcpEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.1 | ds3PlcpBoard | 0 | 0 | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.2 | ds3PlcpModule | 0 | 0 | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.3 | ds3PlcpPort | 0 | 0 | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.4 | ds3PlcpFERRs | 0 | 0 | Number of Physical Layer Convergence Protocol (PLCP) octet error events. |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.5 | ds3PlcpLOFs | 0 | 0 | The number of seconds in which Loss Of Frame (LOF) errors were detected by the PLCP (Physical Layer Convergence Protocol) receive… |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.6 | ds3PlcpBIP8s | 0 | 0 | Number of BIP-8 (Bit Interleaved Parity - 8) error events. The BIP-8 is calculated over the Path Overhead field and the associate… |
| 1.3.6.1.4.1.326.2.2.1.1.3.2.2.1.7 | ds3PlcpFEBEs | 0 | 0 | Number of ATM Far End Block Error (FEBE) events. |