A table entry containing DS1 configuration information for
each port. Not all RFC1406 configuration table variables are
included, and some are modified.
Parsed from file fore-ds1.mib.txt
Company: None
Module: Fore-DS1-MIB
A table entry containing DS1 configuration information for
each port. Not all RFC1406 configuration table variables are
included, and some are modified.
Parsed from file Fore-DS1-MIB.mib
Module: Fore-DS1-MIB
Vendor: Fore Systems, Inc.
Module: Fore-DS1-MIB
[Automatically extracted from oidview.com]
ds1ConfEntry OBJECT-TYPE SYNTAX Ds1ConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry containing DS1 configuration information for each port. Not all RFC1406 configuration table variables are included, and some are modified." INDEX { ds1ConfBoard, ds1ConfModule, ds1ConfPort } ::= { ds1ConfTable 1 }
ds1ConfEntry OBJECT-TYPE SYNTAX Ds1ConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table entry containing DS1 configuration information for each port. Not all RFC1406 configuration table variables are included, and some are modified." INDEX { ds1ConfBoard, ds1ConfModule, ds1ConfPort } ::= { ds1ConfTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.1 | ds1ConfBoard | 0 | 0 | The index of this port's switch board. |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.2 | ds1ConfModule | 0 | 0 | The network module of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.3 | ds1ConfPort | 0 | 0 | The number of this port. |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.4 | ds1LineType | 0 | 0 | This variable indicates the variety of DS1 Line implementing this circuit. The type of circuit affects the number of bits per sec… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.5 | ds1LineCoding | 0 | 0 | This variable describes the variety of Zero Code suppression used on this link, which in turn affects a number of its characteris… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.6 | ds1SendCode | 0 | 0 | This variable indicates what type of code is being sent across the DS1 interface by the device. The values mean: ds1SendNoCode se… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.7 | ds1ReceiveCode | 0 | 0 | This variable indicates the type of code that was received across the DS interface. The values mean: ds1ReceiveNoCode receiving lo… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.8 | ds1LoopbackConfig | 0 | 0 | This variable represents the loopback configuration of the DS1 interface. This variable is defined in the rfc1406 configuration t… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.9 | ds1TxClockSource | 0 | 0 | The source of the transmit clock. rxTiming(1) indicated that the recovered receive clock is used as the transmit clock. localTimin… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.12 | ds1LineStatus | 0 | 0 | This variable indicates the Line Status of the interface. A similar object is defined in the rfc1406 configuration table as dsx1L… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.13 | ds1IdleUnassignedCells | 0 | 0 | This variable indicates the types of cells that should be sent in case there is no real data to send. According to the ATM Forum,… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.14 | ds1LineTypeFraming | 0 | 0 | This variable indicates the way ATM cells are constructed from the DS1 stream. ds1Hcs(2) indicates that the ATM cells are constru… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.15 | ds1LineLength | 0 | 0 | This variable represents the length of the physical cable connected to the ds1 port. The user has to set this object to match the… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.16 | ds1RxScrambling | 0 | 0 | This variable indicates whether the information is being descrambled on receiving. It should be set the same as the transmitting … |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.17 | ds1TxScrambling | 0 | 0 | This variable indicates whether the information (48 octet payload) is being scrambled before transmitting. It should be set the s… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.18 | ds1TxPRBS | 0 | 0 | This variable controls the Pseudo-Random Bit Sequence Generator (PRSG) which generates an unframed 2^15-1 test sequence as define… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.19 | ds1CRCErrThrSeconds | 0 | 0 | This variable represents the consecutive number of BAD/GOOD seconds to detect/clear an Excessive CRC Error Defect. The range of v… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.20 | ds1CRCErrThrErrors | 0 | 0 | This variable is a threshold for the number of CRC Errors per second and is used as a parameter to the Excessive CRC Error Defect… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.21 | ds1CRCErrFailEnable | 0 | 0 | This variable controls whether declaration of an Excessive CRC Error Defect forces the port's operState to Down. |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.22 | ds1SigFailBer | 0 | 0 | This is the exponent of 10 for the current signal fail bit error rate (BER) threshold for this port. The value -4, for example, r… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.23 | ds1SigDegradeBer | 0 | 0 | This is the exponent of 10 for the current signal degrade bit error rate (BER) threshold for this port. The value -8, for example… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.24 | ds1BerErrorModel | 0 | 0 | This is the error distribution model to be used to identify signal degrade and signal fail conditions. errorModelRandom selects a… |
| 1.3.6.1.4.1.326.2.2.1.1.7.1.1.1.25 | ds1BerState | 0 | 0 | This value describes the current state of the port as determined through bit error rate analysis. |