The value specifies the link length supported by the GBIC in
meters, while operating in compliance with the applicable
standards using copper cable. The value is in units of 1 meter.
Parsed from file fore-asxethernet.mib.txt
Company: marconi
Module: Fore-Asxethernet-MIB
Vendor: Marconi
Module: Fore-Asxethernet-MIB (fore-asxethernet.mib-mib)
Type: TABULAR
Access: read-only
Syntax: Integer32
Automatically extracted from www.mibdepot.com
foreGbicLengthCop OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value specifies the link length supported by the GBIC in meters, while operating in compliance with the applicable standards using copper cable. The value is in units of 1 meter." ::= { foreGbicEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.16.1.1 | foreGbicPortIndex | 0 | 0 | The index of the port. |
| 1.3.6.1.4.1.326.2.2.1.16.1.2 | foreGbicIdentifier | 0 | 0 | The identifier value specifies the physical device described by the serial information. |
| 1.3.6.1.4.1.326.2.2.1.16.1.3 | foreGbicExtIdentifier | 0 | 0 | The extended identifier provides additional information about transceiver. At present the extended identifier values are specifie… |
| 1.3.6.1.4.1.326.2.2.1.16.1.4 | foreGbicConnector | 0 | 0 | The connector value indicates the external connector provided on the interface. The defined connector values are shown below: VALU… |
| 1.3.6.1.4.1.326.2.2.1.16.1.5 | foreGbicTransceiver | 0 | 0 | This field defines the electronic and optical interfaces that are supported. |
| 1.3.6.1.4.1.326.2.2.1.16.1.6 | foreGbicEncoding | 0 | 0 | The encoding value indicates the serial encoding mechanism that is the nominal design target of the particular GBIC. |
| 1.3.6.1.4.1.326.2.2.1.16.1.7 | foreGbicBrNominal | 0 | 0 | This is specified in units of 100Mbps, rounded off to the nearest 100 Megabits per second. The value of 0 indicates that the bit … |
| 1.3.6.1.4.1.326.2.2.1.16.1.8 | foreGbicLength9uKm | 0 | 0 | The value specifies the link length supported by the GBIC in kilometers, while operating in compliance with the applicable standa… |
| 1.3.6.1.4.1.326.2.2.1.16.1.9 | foreGbicLength9um | 0 | 0 | The value specifies the link length supported by the GBIC in meters, while operating in compliance with the applicable standards … |
| 1.3.6.1.4.1.326.2.2.1.16.1.10 | foreGbicLength50u | 0 | 0 | The value specifies the link length supported by the GBIC in meters, while operating in compliance with the applicable standards … |
| 1.3.6.1.4.1.326.2.2.1.16.1.11 | foreGbicLength625u | 0 | 0 | The value specifies the link length supported by the GBIC in meters, while operating in compliance with the applicable standards … |
| 1.3.6.1.4.1.326.2.2.1.16.1.13 | foreGbicVendorName | 0 | 0 | This field specifies the vendor name. |
| 1.3.6.1.4.1.326.2.2.1.16.1.14 | foreGbicVendorOui | 0 | 0 | The vendor organizationally unique identifier field contains the IEEE company identifier for the vendor. |
| 1.3.6.1.4.1.326.2.2.1.16.1.15 | foreGbicVendorPn | 0 | 0 | The vendor part number. |
| 1.3.6.1.4.1.326.2.2.1.16.1.16 | foreGbicVendorRev | 0 | 0 | The vendor revision number. |
| 1.3.6.1.4.1.326.2.2.1.16.1.17 | foreGbiccCcBase | 0 | 0 | This field contains the check code that can be used to verify the serial information is correct. |
| 1.3.6.1.4.1.326.2.2.1.16.1.18 | foreGbicOptions | 0 | 0 | This field describes the options implemented in the GBIC. |
| 1.3.6.1.4.1.326.2.2.1.16.1.19 | foreGbicBrMax | 0 | 0 | The upper bit rate limit at which the GBIC will still meet its specification. |
| 1.3.6.1.4.1.326.2.2.1.16.1.20 | foreGbicBrMin | 0 | 0 | The lower bit rate limit at which the GBIC will still meet its specification. |
| 1.3.6.1.4.1.326.2.2.1.16.1.21 | foreGbicVendorSn | 0 | 0 | The vendor serial number. |
| 1.3.6.1.4.1.326.2.2.1.16.1.22 | foreGbicDateCode | 0 | 0 | The vendors date code |
| 1.3.6.1.4.1.326.2.2.1.16.1.23 | foreGbicCcExt | 0 | 0 | Check code of the extended vendor fields. |
| 1.3.6.1.4.1.326.2.2.1.16.1.24 | foreGbicSupport | 0 | 0 | This field will indicate whether or not the GBIC plugged in is Marconi approved. |