The value specifies the link length supported by the GBIC in
kilometers, while operating in compliance with the applicable
standards using single mode fiber.
Parsed from file fore-asxethernet.mib.txt
Company: marconi
Module: Fore-Asxethernet-MIB
Vendor: Marconi
Module: Fore-Asxethernet-MIB (fore-asxethernet.mib-mib)
Type: TABULAR
Access: read-only
Syntax: Integer32
Automatically extracted from www.mibdepot.com
foreGbicLength9uKm OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value specifies the link length supported by the GBIC in kilometers, while operating in compliance with the applicable standards using single mode fiber." ::= { foreGbicEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.2.1.16.1.1 | foreGbicPortIndex | 0 | 0 | The index of the port. |
| 1.3.6.1.4.1.326.2.2.1.16.1.2 | foreGbicIdentifier | 0 | 0 | The identifier value specifies the physical device described by the serial information. |
| 1.3.6.1.4.1.326.2.2.1.16.1.3 | foreGbicExtIdentifier | 0 | 0 | The extended identifier provides additional information about transceiver. At present the extended identifier values are specifie… |
| 1.3.6.1.4.1.326.2.2.1.16.1.4 | foreGbicConnector | 0 | 0 | The connector value indicates the external connector provided on the interface. The defined connector values are shown below: VALU… |
| 1.3.6.1.4.1.326.2.2.1.16.1.5 | foreGbicTransceiver | 0 | 0 | This field defines the electronic and optical interfaces that are supported. |
| 1.3.6.1.4.1.326.2.2.1.16.1.6 | foreGbicEncoding | 0 | 0 | The encoding value indicates the serial encoding mechanism that is the nominal design target of the particular GBIC. |
| 1.3.6.1.4.1.326.2.2.1.16.1.7 | foreGbicBrNominal | 0 | 0 | This is specified in units of 100Mbps, rounded off to the nearest 100 Megabits per second. The value of 0 indicates that the bit … |
| 1.3.6.1.4.1.326.2.2.1.16.1.9 | foreGbicLength9um | 0 | 0 | The value specifies the link length supported by the GBIC in meters, while operating in compliance with the applicable standards … |
| 1.3.6.1.4.1.326.2.2.1.16.1.10 | foreGbicLength50u | 0 | 0 | The value specifies the link length supported by the GBIC in meters, while operating in compliance with the applicable standards … |
| 1.3.6.1.4.1.326.2.2.1.16.1.11 | foreGbicLength625u | 0 | 0 | The value specifies the link length supported by the GBIC in meters, while operating in compliance with the applicable standards … |
| 1.3.6.1.4.1.326.2.2.1.16.1.12 | foreGbicLengthCop | 0 | 0 | The value specifies the link length supported by the GBIC in meters, while operating in compliance with the applicable standards … |
| 1.3.6.1.4.1.326.2.2.1.16.1.13 | foreGbicVendorName | 0 | 0 | This field specifies the vendor name. |
| 1.3.6.1.4.1.326.2.2.1.16.1.14 | foreGbicVendorOui | 0 | 0 | The vendor organizationally unique identifier field contains the IEEE company identifier for the vendor. |
| 1.3.6.1.4.1.326.2.2.1.16.1.15 | foreGbicVendorPn | 0 | 0 | The vendor part number. |
| 1.3.6.1.4.1.326.2.2.1.16.1.16 | foreGbicVendorRev | 0 | 0 | The vendor revision number. |
| 1.3.6.1.4.1.326.2.2.1.16.1.17 | foreGbiccCcBase | 0 | 0 | This field contains the check code that can be used to verify the serial information is correct. |
| 1.3.6.1.4.1.326.2.2.1.16.1.18 | foreGbicOptions | 0 | 0 | This field describes the options implemented in the GBIC. |
| 1.3.6.1.4.1.326.2.2.1.16.1.19 | foreGbicBrMax | 0 | 0 | The upper bit rate limit at which the GBIC will still meet its specification. |
| 1.3.6.1.4.1.326.2.2.1.16.1.20 | foreGbicBrMin | 0 | 0 | The lower bit rate limit at which the GBIC will still meet its specification. |
| 1.3.6.1.4.1.326.2.2.1.16.1.21 | foreGbicVendorSn | 0 | 0 | The vendor serial number. |
| 1.3.6.1.4.1.326.2.2.1.16.1.22 | foreGbicDateCode | 0 | 0 | The vendors date code |
| 1.3.6.1.4.1.326.2.2.1.16.1.23 | foreGbicCcExt | 0 | 0 | Check code of the extended vendor fields. |
| 1.3.6.1.4.1.326.2.2.1.16.1.24 | foreGbicSupport | 0 | 0 | This field will indicate whether or not the GBIC plugged in is Marconi approved. |