The state of this entry. When the swDevCtrlTableLockState object is
enabled, the state is not changed. When swVlanInfoStatus is in
MAC-Base VLAN mode, this object is always disabled. The meanings of
the values are:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
disable(2) - Port lock funtion disable.
enable(3) - Locking a port. Once the port is locked, it will not
learn new SA addresses, and drop unknown/moved-SA packets
forwarding to/from such ports. This is a way to prevent
undesired traffic from being received or transmmited on
the port. Note that locking a port doesn't lock the MAC
address entries associated with the locked port, i.e. the
existing address entries of the locked port will be age
out even though it is locked.
Parsed from file Es1000.mib.txt
Company: marconi
Module: ES1000-MIB
Vendor: Marconi
Module: ES1000-MIB (Es1000.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
swPortCtrlLockState OBJECT-TYPE SYNTAX INTEGER { other(1), disable(2), enable(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this entry. When the swDevCtrlTableLockState object is enabled, the state is not changed. When swVlanInfoStatus is in MAC-Base VLAN mode, this object is always disabled. The meanings of the values are: other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - Port lock funtion disable. enable(3) - Locking a port. Once the port is locked, it will not learn new SA addresses, and drop unknown/moved-SA packets forwarding to/from such ports. This is a way to prevent undesired traffic from being received or transmmited on the port. Note that locking a port doesn't lock the MAC address entries associated with the locked port, i.e. the existing address entries of the locked port will be age out even though it is locked." ::= { swPortCtrlEntry 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.1 | swPortCtrlModuleIndex | 0 | 0 | This object indicates the device module number.(1..Max module number) |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.2 | swPortCtrlPortIndex | 0 | 0 | This object indicates the module's port number.(1..Max port number in the module) |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.3 | swPortCtrlAdminState | 0 | 0 | This object decide the port enabled or disabled. |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.4 | swPortCtrlLinkStatusAlarmState | 0 | 0 | Depending on this object to determine to send a trap or not when link status changes . |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.5 | swPortCtrlNwayState | 0 | 0 | Chose the port speed, duplex mode, and N-Way function mode. |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.6 | swPortCtrlFlowCtrlState | 0 | 0 | Set IEEE 802.3x compliant flow control function as enabled or disabled. And IEEE 802.3x compliant flow control function work onl… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.7 | swPortCtrlBackPressState | 0 | 0 | Depending on this object determine to enable or disable the backpressure function when the port is working in half duplex mode. |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.9 | swPortCtrlPriority | 0 | 0 | The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destinati… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.10 | swPortCtrlStpState | 0 | 0 | The state of STP(spanning tree algorithm) operation on this port. That's meaning the port whether add in the STP. The value enab… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.11 | swPortCtrlHOLState | 0 | 0 | The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet t… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.12 | swPortCtrlBroadcastRisingThr | 0 | 0 | This allows the user to specify the broadcast packets per second. Broadcast traffic above this rate activates broadcast storm co… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.13 | swPortCtrlBroadcastFallingThr | 0 | 0 | This allows the user to specify the broadcast packets per second. If broadcast traffic is below this rate and rising threshold co… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.14 | swPortCtrlBroadcastRisingAct | 0 | 0 | This object indicates the system action when broadcast storm rising threshold is met. other(1) - this entry is currently in use b… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.15 | swPortCtrlBroadcastFallingAct | 0 | 0 | This object indicates the device action when broadcast storm falling threshold is met. other(1) - this entry is currently in use … |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.16 | swPortCtrlCleanAllStatisticCounter | 0 | 0 | Setting this object will reset current device's all statistic counters. |