The priority queueing for packets received on this port, except for
BPDU/IGMP packets and packets with unknown unicast destination address.
IGMP and BPDU packets are always routed with high priority; packets with
unknown unicast destination addresses are always routed with low priority.
Other packets follow the rules below:
other(1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the
following values.
default(2) - A packet is normally classified as low priority
,unless at least one of the following is true:
.The packet contained a TAG (per 802.1Q definition) with the
priority greater or equal to 4.
.The address-table entry for the destination address had Pd=HIGH.
force-low_priority(3) - A packet is normally classified as low priority.
force-high_priority(4) - A packet is normally classified as high
priority.
Parsed from file Es1000.mib.txt
Company: marconi
Module: ES1000-MIB
Vendor: Marconi
Module: ES1000-MIB (Es1000.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
swPortCtrlPriority OBJECT-TYPE SYNTAX INTEGER { other(1), default(2), force-low-priority(3), force-high-priority(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destination address. IGMP and BPDU packets are always routed with high priority; packets with unknown unicast destination addresses are always routed with low priority. Other packets follow the rules below: other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. default(2) - A packet is normally classified as low priority ,unless at least one of the following is true: .The packet contained a TAG (per 802.1Q definition) with the priority greater or equal to 4. .The address-table entry for the destination address had Pd=HIGH. force-low_priority(3) - A packet is normally classified as low priority. force-high_priority(4) - A packet is normally classified as high priority." ::= { swPortCtrlEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.1 | swPortCtrlModuleIndex | 0 | 0 | This object indicates the device module number.(1..Max module number) |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.2 | swPortCtrlPortIndex | 0 | 0 | This object indicates the module's port number.(1..Max port number in the module) |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.3 | swPortCtrlAdminState | 0 | 0 | This object decide the port enabled or disabled. |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.4 | swPortCtrlLinkStatusAlarmState | 0 | 0 | Depending on this object to determine to send a trap or not when link status changes . |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.5 | swPortCtrlNwayState | 0 | 0 | Chose the port speed, duplex mode, and N-Way function mode. |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.6 | swPortCtrlFlowCtrlState | 0 | 0 | Set IEEE 802.3x compliant flow control function as enabled or disabled. And IEEE 802.3x compliant flow control function work onl… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.7 | swPortCtrlBackPressState | 0 | 0 | Depending on this object determine to enable or disable the backpressure function when the port is working in half duplex mode. |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.8 | swPortCtrlLockState | 0 | 0 | The state of this entry. When the swDevCtrlTableLockState object is enabled, the state is not changed. When swVlanInfoStatus is… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.10 | swPortCtrlStpState | 0 | 0 | The state of STP(spanning tree algorithm) operation on this port. That's meaning the port whether add in the STP. The value enab… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.11 | swPortCtrlHOLState | 0 | 0 | The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet t… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.12 | swPortCtrlBroadcastRisingThr | 0 | 0 | This allows the user to specify the broadcast packets per second. Broadcast traffic above this rate activates broadcast storm co… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.13 | swPortCtrlBroadcastFallingThr | 0 | 0 | This allows the user to specify the broadcast packets per second. If broadcast traffic is below this rate and rising threshold co… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.14 | swPortCtrlBroadcastRisingAct | 0 | 0 | This object indicates the system action when broadcast storm rising threshold is met. other(1) - this entry is currently in use b… |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.15 | swPortCtrlBroadcastFallingAct | 0 | 0 | This object indicates the device action when broadcast storm falling threshold is met. other(1) - this entry is currently in use … |
1.3.6.1.4.1.326.2.20.1.2.2.2.24.3.2.1.16 | swPortCtrlCleanAllStatisticCounter | 0 | 0 | Setting this object will reset current device's all statistic counters. |