This allows the user to specify the broadcast packets per second.
Broadcast traffic above this rate activates broadcast storm control
(i.e. swPortCtrlBroadcastRisingAct) on the port. The default value
is 500 broadcast packets per second. The setting must be bigger
than the value in swPortCtrlBroadcastFallingThr.
Parsed from file es1300.mib.txt
Company: marconi
Module: ES1300-MIB
Vendor: Marconi
Module: ES1300-MIB (es1300.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
(
1..1488000 )
Automatically extracted from www.mibdepot.com
swPortCtrlBroadcastRisingThr OBJECT-TYPE SYNTAX INTEGER (1..1488000) ACCESS read-write STATUS mandatory DESCRIPTION "This allows the user to specify the broadcast packets per second. Broadcast traffic above this rate activates broadcast storm control (i.e. swPortCtrlBroadcastRisingAct) on the port. The default value is 500 broadcast packets per second. The setting must be bigger than the value in swPortCtrlBroadcastFallingThr." ::= { swPortCtrlEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.1 | swPortCtrlIndex | 0 | 0 | This object indicates the device port number.(1..Max port number) |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.2 | swPortCtrlAdminState | 0 | 0 | This object decide the port enabled or disabled. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.3 | swPortCtrlLinkStatusAlarmState | 0 | 0 | Depending on this object to determine to send a trap or not when link status changes . |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.4 | swPortCtrlNwayState | 0 | 0 | Chose the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.5 | swPortCtrlFlowCtrlState | 0 | 0 | Set IEEE 802.3x compliant flow control function as enabled or disabled. And IEEE 802.3x compliant flow control function work onl… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.6 | swPortCtrlBackPressState | 0 | 0 | Depending on this object determine to enable or disable the backpressure function when the port is working in half duplex mode. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.7 | swPortCtrlLockState | 0 | 0 | The state of this entry. The meanings of the values are: other(1) - this entry is currently in use but the conditions under wh… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.8 | swPortCtrlPriority | 0 | 0 | The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destinati… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.9 | swPortCtrlStpState | 0 | 0 | The state of STP(spanning tree algorithm) operation on this port. The value enabled(3) indicates that STP is enabled on this po… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.10 | swPortCtrlHOLState | 0 | 0 | The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet t… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.12 | swPortCtrlBroadcastFallingThr | 0 | 0 | This allows the user to specify the broadcast packets per second. If broadcast traffic is below this rate and rising threshold co… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.13 | swPortCtrlBroadcastRisingAct | 0 | 0 | This object indicates the system action when broadcast storm rising threshold is met. other(1) - this entry is currently in use b… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.14 | swPortCtrlBroadcastFallingAct | 0 | 0 | This object indicates the device action when broadcast storm falling threshold is met. other(1) - this entry is currently in use … |