Chose the port speed, duplex mode, and N-Way function mode.
Parsed from file es1300.mib.txt
Company: marconi
Module: ES1300-MIB
Vendor: Marconi
Module: ES1300-MIB (es1300.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
swPortCtrlNwayState OBJECT-TYPE SYNTAX INTEGER { other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1000Mbps-Half(7), nway-disabled-1000Mbps-Full(8) } ACCESS read-write STATUS mandatory DESCRIPTION "Chose the port speed, duplex mode, and N-Way function mode." ::= { swPortCtrlEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.1 | swPortCtrlIndex | 0 | 0 | This object indicates the device port number.(1..Max port number) |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.2 | swPortCtrlAdminState | 0 | 0 | This object decide the port enabled or disabled. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.3 | swPortCtrlLinkStatusAlarmState | 0 | 0 | Depending on this object to determine to send a trap or not when link status changes . |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.5 | swPortCtrlFlowCtrlState | 0 | 0 | Set IEEE 802.3x compliant flow control function as enabled or disabled. And IEEE 802.3x compliant flow control function work onl… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.6 | swPortCtrlBackPressState | 0 | 0 | Depending on this object determine to enable or disable the backpressure function when the port is working in half duplex mode. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.7 | swPortCtrlLockState | 0 | 0 | The state of this entry. The meanings of the values are: other(1) - this entry is currently in use but the conditions under wh… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.8 | swPortCtrlPriority | 0 | 0 | The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destinati… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.9 | swPortCtrlStpState | 0 | 0 | The state of STP(spanning tree algorithm) operation on this port. The value enabled(3) indicates that STP is enabled on this po… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.10 | swPortCtrlHOLState | 0 | 0 | The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet t… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.11 | swPortCtrlBroadcastRisingThr | 0 | 0 | This allows the user to specify the broadcast packets per second. Broadcast traffic above this rate activates broadcast storm co… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.12 | swPortCtrlBroadcastFallingThr | 0 | 0 | This allows the user to specify the broadcast packets per second. If broadcast traffic is below this rate and rising threshold co… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.13 | swPortCtrlBroadcastRisingAct | 0 | 0 | This object indicates the system action when broadcast storm rising threshold is met. other(1) - this entry is currently in use b… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.26.3.2.1.14 | swPortCtrlBroadcastFallingAct | 0 | 0 | This object indicates the device action when broadcast storm falling threshold is met. other(1) - this entry is currently in use … |