The state of STP(spanning tree algorithm) operation on this port.
That's meaning the port whether add in the STP. The value enabled(3)
indicates that STP is enabled on this port, as long as swDevCtrlStpState
is also enabled for this device. When disabled(2) but swDevCtrlStpState
is still enabled for the device, STP is disabled on this port : any
BPDU packets received will be discarded and no BPDU packets will be
propagated from the port.
Parsed from file SL2Port.mib.txt
Company: marconi
Module: SW-LAYER2-PORT-MANAGEMENT-MIB
Vendor: Marconi
Module: SW-LAYER2-PORT-MANAGEMENT-MIB (SL2Port.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
swL2PortCtrlStpState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3), notAvailable(4) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of STP(spanning tree algorithm) operation on this port. That's meaning the port whether add in the STP. The value enabled(3) indicates that STP is enabled on this port, as long as swDevCtrlStpState is also enabled for this device. When disabled(2) but swDevCtrlStpState is still enabled for the device, STP is disabled on this port : any BPDU packets received will be discarded and no BPDU packets will be propagated from the port." ::= { swL2PortCtrlEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.1 | swL2PortCtrlUnitIndex | 0 | 0 | Indicates ID of the unit in the device. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.2 | swL2PortCtrlModuleIndex | 0 | 0 | Indicates ID of the module on the unit. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.3 | swL2PortCtrlIndex | 0 | 0 | This object indicates the device port number.(1..Max port number). |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.4 | swL2PortCtrlAdminState | 0 | 0 | This object decides the port to be enabled or disabled. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.5 | swL2PortCtrlLinkStatusAlarmState | 0 | 0 | Depends on this object to determine to send a trap or not when link status changes. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.6 | swL2PortCtrlNwayState | 0 | 0 | Chooses the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.7 | swL2PortCtrlFlowCtrlState | 0 | 0 | Sets IEEE 802.3x compliant flow control function as enabled or disabled. And IEEE 802.3x compliant flow control function work on… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.8 | swL2PortCtrlBackPressState | 0 | 0 | Depends on this object to determine to enable or disable the backpressure function when the port is working in half duplex mode. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.9 | swL2PortCtrlLockState | 0 | 0 | The state of this entry. The meanings of the values are: other(1) - this entry is currently in use but the conditions under whic… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.10 | swL2PortCtrlPriority | 0 | 0 | The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destinati… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.12 | swL2PortCtrlHOLState | 0 | 0 | The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet t… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.13 | swL2PortCtrlBcastRisingAct | 0 | 0 | This object indicates the system action when broadcast storm rising threshold is met. other(1) - this entry is currently in use b… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.14 | swL2PortCtrlBcastFallingAct | 0 | 0 | This object indicates the device action when broadcast storm falling threshold is met. other(1) - this entry is currently in use … |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.15 | swL2PortCtrlClearCounter | 1 | 1 | Sets choosed port to clear counter. First of all, any unsigned integer can be used to set. |