Sets IEEE 802.3x compliant flow control function as enabled or disabled.
And IEEE 802.3x compliant flow control function work only when the port
is in full duplex mode.The setting is effective the next time you reset
or power on the hub.
Parsed from file SL2Port.mib.txt
Company: marconi
Module: SW-LAYER2-PORT-MANAGEMENT-MIB
Vendor: Marconi
Module: SW-LAYER2-PORT-MANAGEMENT-MIB (SL2Port.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
swL2PortCtrlFlowCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Sets IEEE 802.3x compliant flow control function as enabled or disabled. And IEEE 802.3x compliant flow control function work only when the port is in full duplex mode.The setting is effective the next time you reset or power on the hub." ::= { swL2PortCtrlEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.1 | swL2PortCtrlUnitIndex | 0 | 0 | Indicates ID of the unit in the device. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.2 | swL2PortCtrlModuleIndex | 0 | 0 | Indicates ID of the module on the unit. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.3 | swL2PortCtrlIndex | 0 | 0 | This object indicates the device port number.(1..Max port number). |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.4 | swL2PortCtrlAdminState | 0 | 0 | This object decides the port to be enabled or disabled. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.5 | swL2PortCtrlLinkStatusAlarmState | 0 | 0 | Depends on this object to determine to send a trap or not when link status changes. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.6 | swL2PortCtrlNwayState | 0 | 0 | Chooses the port speed, duplex mode, and N-Way function mode. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.8 | swL2PortCtrlBackPressState | 0 | 0 | Depends on this object to determine to enable or disable the backpressure function when the port is working in half duplex mode. |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.9 | swL2PortCtrlLockState | 0 | 0 | The state of this entry. The meanings of the values are: other(1) - this entry is currently in use but the conditions under whic… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.10 | swL2PortCtrlPriority | 0 | 0 | The priority queueing for packets received on this port, except for BPDU/IGMP packets and packets with unknown unicast destinati… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.11 | swL2PortCtrlStpState | 0 | 0 | The state of STP(spanning tree algorithm) operation on this port. That's meaning the port whether add in the STP. The value enab… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.12 | swL2PortCtrlHOLState | 0 | 0 | The object provides a way to prevent HOL (Head Of Line) blocking between ports. HOL protection may prevent forwarding a packet t… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.13 | swL2PortCtrlBcastRisingAct | 0 | 0 | This object indicates the system action when broadcast storm rising threshold is met. other(1) - this entry is currently in use b… |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.14 | swL2PortCtrlBcastFallingAct | 0 | 0 | This object indicates the device action when broadcast storm falling threshold is met. other(1) - this entry is currently in use … |
| 1.3.6.1.4.1.326.2.20.1.2.2.2.28.2.4.2.1.15 | swL2PortCtrlClearCounter | 1 | 1 | Sets choosed port to clear counter. First of all, any unsigned integer can be used to set. |