Control whether the alarm will have an audible sound for
all alarm points attached to this port.
Parsed from file it-character-mib.mib.txt
Company: None
Module: ITOUCH-CHARACTER-MIB
Control whether the alarm will have an audible sound for
all alarm points attached to this port.
Parsed from file MRVINREACH.mib
Module: MRVINREACH
basicPortAlarmMasterAudibleAlarm OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control whether the alarm will have an audible sound for all alarm points attached to this port." DEFVAL {disabled } ::= { basicPortEntry 63 }
Vendor: MRV Communications, In-Reach Product Division
Module: ITOUCH-CHARACTER-MIB
[Automatically extracted from oidview.com]
basicPortAlarmMasterAudibleAlarm OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control whether the alarm will have an audible sound for all alarm points attached to this port." DEFVAL {disabled } ::= { basicPortEntry 63 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.13.1.17.1.1 | basicPortIndex | 0 | 0 | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as ident… |
| 1.3.6.1.4.1.33.13.1.17.1.2 | basicPortDefaultDestAction | 0 | 0 | The action to take relative to basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE and the label '… |
| 1.3.6.1.4.1.33.13.1.17.1.3 | basicPortDefaultDestProtocol | 0 | 0 | The session protocol to use with basicPortDefaultDestName. Corresponds directly to LAT/TELNET PORT DEDICATED/PREFERRED SERVICE. |
| 1.3.6.1.4.1.33.13.1.17.1.4 | basicPortDefaultDestName | 0 | 0 | The default name to use in forming a connection when no other name is specified. Corresponds directly to PORT DEDICATED/PREFERRE… |
| 1.3.6.1.4.1.33.13.1.17.1.5 | basicPortDefaultDestLATNodeName | 0 | 0 | A LAT node name to use with basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE NODE and the valu… |
| 1.3.6.1.4.1.33.13.1.17.1.6 | basicPortDefaultDestLATPortName | 0 | 0 | A LAT port name to use with basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE NODE and the valu… |
| 1.3.6.1.4.1.33.13.1.17.1.7 | basicPortAutoConnect | 0 | 0 | Control for automatic session connection. Corresponds directly to PORT AUTOCONNECT and the presence of the label 'Autoconnect' fo… |
| 1.3.6.1.4.1.33.13.1.17.1.8 | basicPortAutoLogin | 0 | 0 | Control for automatic port login. Corresponds directly to PORT AUTODEDICATED and the presence of the label 'Autodedicated' follo… |
| 1.3.6.1.4.1.33.13.1.17.1.9 | basicPortBroadcast | 0 | 0 | Control for display of messages sent by users on other ports. Corresponds directly to PORT BROADCAST and the presence of the lab… |
| 1.3.6.1.4.1.33.13.1.17.1.10 | basicPortConnectResume | 0 | 0 | Control for behavior of a connection attempt to a destination where the port already has a connection. 'disabled' causes a new co… |
| 1.3.6.1.4.1.33.13.1.17.1.11 | basicPortDialup | 0 | 0 | Defines whether the port should be considered as connected to a dialup line. 'enabled' means that it is. Corresponds directly t… |
| 1.3.6.1.4.1.33.13.1.17.1.12 | basicPortIdleTimeout | 0 | 0 | The number of minutes the system will allow a session to have no activity before automatically disconnecting it. A value of -1 i… |
| 1.3.6.1.4.1.33.13.1.17.1.13 | basicPortInactivityLogout | 0 | 0 | Control for the system automatically logging the port out when it has no sessions, no local activity, and no modem signal changes… |
| 1.3.6.1.4.1.33.13.1.17.1.14 | basicPortLossNotification | 0 | 0 | Control for the system sending a Bell character to the port when it looses an input character due to an overrun or data error. C… |
| 1.3.6.1.4.1.33.13.1.17.1.15 | basicPortMessageCodes | 0 | 0 | Control for including error numbers in error messages displayed on the port. Corresponds directly to PORT MESSAGE CODES and the … |
| 1.3.6.1.4.1.33.13.1.17.1.16 | basicPortMultisessions | 0 | 0 | Control for running the multisession line protocol between the port and the locally-connected terminal. Corresponds directly to P… |
| 1.3.6.1.4.1.33.13.1.17.1.17 | basicPortDefaultUserName | 0 | 0 | Default user name to use for automatically logging in the port. Corresponds directly to PORT USERNAME and the value labeled 'Por… |
| 1.3.6.1.4.1.33.13.1.17.1.18 | basicPortVerification | 0 | 0 | Control for display of informational messages on the port when the user connects, disconnects, or switches a session. Correspond… |
| 1.3.6.1.4.1.33.13.1.17.1.19 | basicPortDefaultProtocol | 0 | 0 | The session protocol to use when not otherwise specified. Corresponds directly to PORT RESOLVE SERVICE and the value labeled 'Re… |
| 1.3.6.1.4.1.33.13.1.17.1.20 | basicPortLogins | 0 | 0 | The number of logins on the port since system initialization. Corresponds directly to the value labeled 'Local Accesses:' in the… |
| 1.3.6.1.4.1.33.13.1.17.1.21 | basicPortRemoteSessions | 0 | 0 | The number of remotely originating sessions to the port since system initialization. Corresponds directly to the value labeled '… |
| 1.3.6.1.4.1.33.13.1.17.1.22 | basicPortIdleTimeouts | 0 | 0 | The number of session disconnects due to expiration of basicPortIdleTimeout. Corresponds directly to the value labeled 'Idle Tim… |
| 1.3.6.1.4.1.33.13.1.17.1.23 | basicPortStatus | 0 | 0 | The current operational status of the port. Corresponds directly to the value labeled 'Status:' in the PORT STATUS display. |
| 1.3.6.1.4.1.33.13.1.17.1.24 | basicPortLastInCharacter | 0 | 0 | The character that most recently came into the port. Corresponds directly to the value labeled 'Last Char Input:' in the PORT ST… |
| 1.3.6.1.4.1.33.13.1.17.1.25 | basicPortLastOutCharacter | 0 | 0 | The character that most recently went out of the port. Corresponds directly to the value labeled 'Last Char Output:' in the PORT… |
| 1.3.6.1.4.1.33.13.1.17.1.26 | basicPortActiveUserName | 0 | 0 | The user name currently logged into the port. Corresponds directly to the value by the port number and labeled 'Username' in the … |
| 1.3.6.1.4.1.33.13.1.17.1.27 | basicPortDefaultSessionMode | 0 | 0 | Data recognition mode when starting a session, with the following meanings: interactive locally recognize all controls binary… |
| 1.3.6.1.4.1.33.13.1.17.1.28 | basicPortZero | 0 | 0 | Control to zero counters for the port. In response to a get-request or get-next-request, the agent always returns 'ready' for th… |
| 1.3.6.1.4.1.33.13.1.17.1.29 | basicPortZeroTime | 0 | 0 | The number of hundredths of a second since the most recent zeroing of the port's counters, such as through execution of basicPort… |
| 1.3.6.1.4.1.33.13.1.17.1.30 | basicPortUnixCommands | 0 | 0 | Control to allow the user to use Unix-style commands the port. |
| 1.3.6.1.4.1.33.13.1.17.1.31 | basicPortSessionMode | 0 | 0 | Data recognition mode for an active session, with the following meanings: interactive locally recognize all controls binary … |
| 1.3.6.1.4.1.33.13.1.17.1.32 | basicPortRemoteDisconnectNotify | 0 | 0 | If enabled, a BELL (ctrl G) will be sent out the serial port when a remote session is disconnected and the port is logged out. |
| 1.3.6.1.4.1.33.13.1.17.1.33 | basicPortDefaultDestControlled | 0 | 0 | A control to send preconfigured controlled port session strings when entering or exiting a session established to the basicPortDe… |
| 1.3.6.1.4.1.33.13.1.17.1.34 | basicPortControlledPortLogin | 0 | 0 | A control string to send out the serial port upon port login. Corresponds to the hexadecimal code which is represented in ASCII f… |
| 1.3.6.1.4.1.33.13.1.17.1.35 | basicPortControlledPortLogout | 0 | 0 | A control string to send out the serial port upon port logout. Corresponds to the hexadecimal code which is represented in ASCII … |
| 1.3.6.1.4.1.33.13.1.17.1.36 | basicPortControlledSessionInitialize | 0 | 0 | A control string to send out the serial port upon entering a session. Corresponds to the hexadecimal code which represented in AS… |
| 1.3.6.1.4.1.33.13.1.17.1.37 | basicPortControlledSessionTerminate | 0 | 0 | A control string to send out the serial port upon exiting a session. Corresponds to the hexadecimal code which is represented in … |
| 1.3.6.1.4.1.33.13.1.17.1.38 | basicPortRloginTransparentMode | 0 | 0 | A control to pass x'ff' as binary data, not doubling x'ff'. Similar to basicPortSessionMode = transparent but for a rlogin sessio… |
| 1.3.6.1.4.1.33.13.1.17.1.39 | basicPortLoginDuration | 0 | 0 | The amount of time in minutes that a port may remain logged in regardless of the activity on the port. The value 0 indicates that… |
| 1.3.6.1.4.1.33.13.1.17.1.40 | basicPortOutboundSecurity | 0 | 0 | Control to disable outbound security, which can be either Kerberos or SecureID, on a per port basis. Corresponds directly to th… |
| 1.3.6.1.4.1.33.13.1.17.1.41 | basicPortXonTimer | 0 | 0 | Indicates the number of seconds between successive 'XON's sent out a port. A zero signifies that the timer is disabled. Correspon… |
| 1.3.6.1.4.1.33.13.1.17.1.42 | basicPortDefaultDedicatedSessionType | 0 | 0 | A bit mask that specifies the default session type for a dedicated service for this port. The bit numbers are: 1;service name, 2;… |
| 1.3.6.1.4.1.33.13.1.17.1.43 | basicPortIdleTimeReceive | 0 | 0 | Control to restrict the basicPortIdleTimeout to apply to data received from the network and transmitted out the serial port. Data… |
| 1.3.6.1.4.1.33.13.1.17.1.44 | basicPortIdleTimeTransmit | 0 | 0 | Control to restrict the basicPortIdleTimeout to apply to data received from the serial port and transmitted out the LAN. Data rec… |
| 1.3.6.1.4.1.33.13.1.17.1.45 | basicPortZeroDisconnectSession | 0 | 0 | A control to disconnect a session at Port 0 when the password limit is reached. |
| 1.3.6.1.4.1.33.13.1.17.1.46 | basicPortConsolePort | 0 | 0 | Control to configure this port as a console port. This control is only valid on those models with variable configuration ports. T… |
| 1.3.6.1.4.1.33.13.1.17.1.47 | basicPortLoginPassword | 0 | 0 | The password a user must enter to be given the opportunity to log in to a given port. For security reasons reading this object al… |
| 1.3.6.1.4.1.33.13.1.17.1.48 | basicPortSensor | 0 | 0 | Control to configure this port as a temperature and humidity sensor. This control is only valid on those models with variable con… |
| 1.3.6.1.4.1.33.13.1.17.1.49 | basicPortAlarmControl | 0 | 0 | Control to configure this port for alarm input and control output. This control is only valid on those models with variable confi… |
| 1.3.6.1.4.1.33.13.1.17.1.50 | basicPortCommandLogging | 0 | 0 | A control to toggle logging of commands at this port. Command input may be logged from direct terminal connections, session input… |
| 1.3.6.1.4.1.33.13.1.17.1.51 | basicPortBreakSequence | 0 | 0 | A sequence of characters to be sent out the serial port on receipt of a Break from the network in lieu of a hardware break. |
| 1.3.6.1.4.1.33.13.1.17.1.53 | basicPortTl1Mode | 0 | 0 | Controls the TL1 mode of a port. Valid TL1 modes are human- to-machine language (hml), machine-to-machine language (mml), and MML… |
| 1.3.6.1.4.1.33.13.1.17.1.54 | basicPortTl1Console | 0 | 0 | Controls whether this port becomes the TL1 console receiving and displaying autonomous reports of alarm events. A change takes ef… |
| 1.3.6.1.4.1.33.13.1.17.1.55 | basicPortFallThrough | 0 | 0 | Control to allow a user to login to a port after RADIUS or SecurID authentication fails because the RADIUS servers or SecurID ser… |
| 1.3.6.1.4.1.33.13.1.17.1.56 | basicPortCommandLoggingSuppressControlCharacters | 0 | 0 | Control to toggle suppression of control characters in the command log. This object can only be set to enabled when command loggi… |
| 1.3.6.1.4.1.33.13.1.17.1.57 | basicPortDataLogging | 0 | 0 | Control to toggle data logging on the specified port. |
| 1.3.6.1.4.1.33.13.1.17.1.58 | basicPortDataLoggingSuppressControlCharacters | 0 | 0 | Control to toggle suppression of control characters in the data log. This object can only be set to enabled when data logging is … |
| 1.3.6.1.4.1.33.13.1.17.1.59 | basicPortOnboardSecurity | 0 | 0 | A control to toggle onboard security for this port where the username and password are authenticated against an internal access l… |
| 1.3.6.1.4.1.33.13.1.17.1.60 | basicPortFallBack | 0 | 0 | Control to allow a 'fallback' authentication mechanism after RADIUS or SecurID authentication fails because the RADIUS or SecurID… |
| 1.3.6.1.4.1.33.13.1.17.1.61 | basicPortAlarmMaster | 0 | 0 | Control to configure this port for high densitiy alarm input and control output management. This control is only valid on those m… |
| 1.3.6.1.4.1.33.13.1.17.1.62 | basicPortAlarmMasterAccounting | 0 | 0 | Control to toggle logging of alarm events on this port. Use a charPortReset for this change to take effect. |
| 1.3.6.1.4.1.33.13.1.17.1.64 | basicPortAlarmMasterFixTime | 0 | 0 | Time in minutes between audible alarm soundings for an alarm master port. This occurs after someone hits the master alarm reset b… |
| 1.3.6.1.4.1.33.13.1.17.1.65 | basicPortAlarmMasterLcdDisplayString | 0 | 0 | Updates the LCD display message for the high density alarm unit attached to the port. Corresponds directly to the DISPLAY AMST co… |
| 1.3.6.1.4.1.33.13.1.17.1.66 | basicPortAlarmMasterReboot | 0 | 0 | Control to reboot the high density alarm unit attached to the port when set to 'execute'. In response to a get-request or get-nex… |
| 1.3.6.1.4.1.33.13.1.17.1.67 | basicPortAlarmMasterUpdateFirmwareHost | 0 | 0 | The internet address of the server to use when downloading a new firmware image for the high density alarm unit attached to this … |
| 1.3.6.1.4.1.33.13.1.17.1.68 | basicPortAlarmMasterUpdateFirmwareFileName | 0 | 0 | The filename to request when downloading a new firmware image for the high density alarm unit attached to this port via TFTP. Corr… |
| 1.3.6.1.4.1.33.13.1.17.1.69 | basicPortAlarmMasterUpdateFirmware | 0 | 0 | Control to update firmware for the high density alarm unit attached to the port when set to 'execute'. In response to a get-reque… |
| 1.3.6.1.4.1.33.13.1.17.1.70 | basicPortAlarmMasterStatus | 0 | 0 | Indicates the current status of the high density alarm unit attached to the port. If no response is obtained from this unit, the … |
| 1.3.6.1.4.1.33.13.1.17.1.71 | basicPortAlarmMasterFaultSeverity | 0 | 0 | Control to determine the severity level associated with the trap sent out when a fault occurs when no response is obtained from t… |
| 1.3.6.1.4.1.33.13.1.17.1.72 | basicPortPowerMaster | 0 | 0 | Control to configure this port as a power master port. This control is only valid on those models with variable configuration por… |
| 1.3.6.1.4.1.33.13.1.17.1.73 | basicPortPowerMasterTimeDelay | 0 | 0 | Control to set the power up delay interval in milliseconds for the power device attached to this port. |
| 1.3.6.1.4.1.33.13.1.17.1.74 | basicPortPowerMasterSwitch | 0 | 0 | Control to power on or off all of the outlets in the power device attached to this port. A get-request always returns ready. |
| 1.3.6.1.4.1.33.13.1.17.1.75 | basicPortPowerMasterModel | 0 | 0 | The model number of the power master device, which is connected to this port. |
| 1.3.6.1.4.1.33.13.1.17.1.76 | basicPortPowerMasterSerialNumber | 0 | 0 | The serial number of the power master device, which is connected to this port. |
| 1.3.6.1.4.1.33.13.1.17.1.77 | basicPortPowerMasterFirmware | 0 | 0 | The firmware version of the power master device, which is connected to this port. |
| 1.3.6.1.4.1.33.13.1.17.1.78 | basicPortLockout | 0 | 0 | Control to prohibit access to this port and send a trap when login authentication fails. One must log out the port for this chang… |
| 1.3.6.1.4.1.33.13.1.17.1.79 | basicPortAsciiToTrapTranslation | 0 | 0 | Control to configure the port as an ascii-to-trap translator. One must log out the port for this change to take effect. |
| 1.3.6.1.4.1.33.13.1.17.1.80 | basicPortAsciiToTrapTranslationTrapSeverity | 0 | 0 | Control to determine the severity level associated with the trap sent out from this port. One must log out the port for this chan… |
| 1.3.6.1.4.1.33.13.1.17.1.81 | basicPortAsciiToTrapTranslationMessages | 0 | 0 | Count of number of trap messages sent from this port. |
| 1.3.6.1.4.1.33.13.1.17.1.82 | basicPortAsciiToTrapTranslationLastMessage | 0 | 0 | The last message or partial message sent out by this port. |
| 1.3.6.1.4.1.33.13.1.17.1.83 | basicPortPowerMasterAlarmSeverity | 0 | 0 | Control to determine the severity level associated with the trap sent out when the power device is not responding to this port. |
| 1.3.6.1.4.1.33.13.1.17.1.84 | basicPortPowerMasterDeviceStatus | 0 | 0 | Indicates the current status of the power device controlled by this port. If the device is responding, the status is cleared. Ot… |
| 1.3.6.1.4.1.33.13.1.17.1.85 | basicPortBuffering | 0 | 0 | Control to allow data from an attached device to be retained across multiple sessions. When a session is established to a port wi… |
| 1.3.6.1.4.1.33.13.1.17.1.86 | basicPortLogFacilityLevel | 0 | 0 | Indicates that server originated accounting messages pertaining to this port are logged to the syslog host at this UNIX facility … |
| 1.3.6.1.4.1.33.13.1.17.1.87 | basicPortPppDialBackup | 0 | 0 | Indicates whether this port is configured as a PPP dial backup port. This parameter will not take effect until the port is logged… |
| 1.3.6.1.4.1.33.13.1.17.1.88 | basicPortPppDialBackupNumber | 0 | 0 | The number to dial when a PPP dial backup link is activated, which occurs when the network is down and there are SNMP traps to fo… |
| 1.3.6.1.4.1.33.13.1.17.1.89 | basicPortPppDialBackupRedialTimer | 0 | 0 | Indicates the time in seconds to wait before redialing the basicPortPppDialBackupNumber on a basicPortPppDialBackup port. |
| 1.3.6.1.4.1.33.13.1.17.1.90 | basicPortPppDialBackupRedialRetries | 0 | 0 | Indicates the number of time to try to dial the backup number before recording an error, logging out the port, and if there are n… |
| 1.3.6.1.4.1.33.13.1.17.1.91 | basicPortPppDialBackupDisconnectTimer | 0 | 0 | Indicates the time in seconds that the dial backup link will stay up when there is no more SNMP traffic flowing prior to disconne… |
| 1.3.6.1.4.1.33.13.1.17.1.92 | basicPortPppDialBackupLocalAddress | 0 | 0 | The local address to use in a PPP dial backup link when the network connection is down and there are SNMP traps to forward. |
| 1.3.6.1.4.1.33.13.1.17.1.93 | basicPortPppDialBackupDestinationAddress | 0 | 0 | The destination address to use in a PPP dial backup link when the network connection is down and there are SNMP traps to forward. |
| 1.3.6.1.4.1.33.13.1.17.1.94 | basicPortPppDialBackupAddresses | 0 | 0 | Control to initiate dialing from a dial backup port. In response to get-request or get-next-request, the agent always returns 're… |