Time in minutes between audible alarm soundings for an alarm
master port. This occurs after someone hits the master alarm
reset button. If there is at least one alarm condition on an
alarm point within the fix time, then the alarm will sound
again at the end of that fix time.
Parsed from file it-character-mib.mib.txt
Company: None
Module: ITOUCH-CHARACTER-MIB
Time in minutes between audible alarm soundings for an alarm
master port. This occurs after someone hits the master alarm
reset button. If there is at least one alarm condition on an
alarm point within the fix time, then the alarm will sound
again at the end of that fix time.
Parsed from file MRVINREACH.mib
Module: MRVINREACH
basicPortAlarmMasterFixTime OBJECT-TYPE SYNTAX INTEGER ( 1 .. 720 ) ACCESS read-write STATUS mandatory DESCRIPTION "Time in minutes between audible alarm soundings for an alarm master port. This occurs after someone hits the master alarm reset button. If there is at least one alarm condition on an alarm point within the fix time, then the alarm will sound again at the end of that fix time." DEFVAL { 30 } ::= { basicPortEntry 64 }
Vendor: MRV Communications, In-Reach Product Division
Module: ITOUCH-CHARACTER-MIB
[Automatically extracted from oidview.com]
basicPortAlarmMasterFixTime OBJECT-TYPE SYNTAX INTEGER ( 1 .. 720 ) ACCESS read-write STATUS mandatory DESCRIPTION "Time in minutes between audible alarm soundings for an alarm master port. This occurs after someone hits the master alarm reset button. If there is at least one alarm condition on an alarm point within the fix time, then the alarm will sound again at the end of that fix time." DEFVAL { 30 } ::= { basicPortEntry 64 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.13.1.17.1.1 | basicPortIndex | 0 | 0 | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as ident… |
| 1.3.6.1.4.1.33.13.1.17.1.2 | basicPortDefaultDestAction | 0 | 0 | The action to take relative to basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE and the label '… |
| 1.3.6.1.4.1.33.13.1.17.1.3 | basicPortDefaultDestProtocol | 0 | 0 | The session protocol to use with basicPortDefaultDestName. Corresponds directly to LAT/TELNET PORT DEDICATED/PREFERRED SERVICE. |
| 1.3.6.1.4.1.33.13.1.17.1.4 | basicPortDefaultDestName | 0 | 0 | The default name to use in forming a connection when no other name is specified. Corresponds directly to PORT DEDICATED/PREFERRE… |
| 1.3.6.1.4.1.33.13.1.17.1.5 | basicPortDefaultDestLATNodeName | 0 | 0 | A LAT node name to use with basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE NODE and the valu… |
| 1.3.6.1.4.1.33.13.1.17.1.6 | basicPortDefaultDestLATPortName | 0 | 0 | A LAT port name to use with basicPortDefaultDestName. Corresponds directly to PORT DEDICATED/PREFERRED SERVICE NODE and the valu… |
| 1.3.6.1.4.1.33.13.1.17.1.7 | basicPortAutoConnect | 0 | 0 | Control for automatic session connection. Corresponds directly to PORT AUTOCONNECT and the presence of the label 'Autoconnect' fo… |
| 1.3.6.1.4.1.33.13.1.17.1.8 | basicPortAutoLogin | 0 | 0 | Control for automatic port login. Corresponds directly to PORT AUTODEDICATED and the presence of the label 'Autodedicated' follo… |
| 1.3.6.1.4.1.33.13.1.17.1.9 | basicPortBroadcast | 0 | 0 | Control for display of messages sent by users on other ports. Corresponds directly to PORT BROADCAST and the presence of the lab… |
| 1.3.6.1.4.1.33.13.1.17.1.10 | basicPortConnectResume | 0 | 0 | Control for behavior of a connection attempt to a destination where the port already has a connection. 'disabled' causes a new co… |
| 1.3.6.1.4.1.33.13.1.17.1.11 | basicPortDialup | 0 | 0 | Defines whether the port should be considered as connected to a dialup line. 'enabled' means that it is. Corresponds directly t… |
| 1.3.6.1.4.1.33.13.1.17.1.12 | basicPortIdleTimeout | 0 | 0 | The number of minutes the system will allow a session to have no activity before automatically disconnecting it. A value of -1 i… |
| 1.3.6.1.4.1.33.13.1.17.1.13 | basicPortInactivityLogout | 0 | 0 | Control for the system automatically logging the port out when it has no sessions, no local activity, and no modem signal changes… |
| 1.3.6.1.4.1.33.13.1.17.1.14 | basicPortLossNotification | 0 | 0 | Control for the system sending a Bell character to the port when it looses an input character due to an overrun or data error. C… |
| 1.3.6.1.4.1.33.13.1.17.1.15 | basicPortMessageCodes | 0 | 0 | Control for including error numbers in error messages displayed on the port. Corresponds directly to PORT MESSAGE CODES and the … |
| 1.3.6.1.4.1.33.13.1.17.1.16 | basicPortMultisessions | 0 | 0 | Control for running the multisession line protocol between the port and the locally-connected terminal. Corresponds directly to P… |
| 1.3.6.1.4.1.33.13.1.17.1.17 | basicPortDefaultUserName | 0 | 0 | Default user name to use for automatically logging in the port. Corresponds directly to PORT USERNAME and the value labeled 'Por… |
| 1.3.6.1.4.1.33.13.1.17.1.18 | basicPortVerification | 0 | 0 | Control for display of informational messages on the port when the user connects, disconnects, or switches a session. Correspond… |
| 1.3.6.1.4.1.33.13.1.17.1.19 | basicPortDefaultProtocol | 0 | 0 | The session protocol to use when not otherwise specified. Corresponds directly to PORT RESOLVE SERVICE and the value labeled 'Re… |
| 1.3.6.1.4.1.33.13.1.17.1.20 | basicPortLogins | 0 | 0 | The number of logins on the port since system initialization. Corresponds directly to the value labeled 'Local Accesses:' in the… |
| 1.3.6.1.4.1.33.13.1.17.1.21 | basicPortRemoteSessions | 0 | 0 | The number of remotely originating sessions to the port since system initialization. Corresponds directly to the value labeled '… |
| 1.3.6.1.4.1.33.13.1.17.1.22 | basicPortIdleTimeouts | 0 | 0 | The number of session disconnects due to expiration of basicPortIdleTimeout. Corresponds directly to the value labeled 'Idle Tim… |
| 1.3.6.1.4.1.33.13.1.17.1.23 | basicPortStatus | 0 | 0 | The current operational status of the port. Corresponds directly to the value labeled 'Status:' in the PORT STATUS display. |
| 1.3.6.1.4.1.33.13.1.17.1.24 | basicPortLastInCharacter | 0 | 0 | The character that most recently came into the port. Corresponds directly to the value labeled 'Last Char Input:' in the PORT ST… |
| 1.3.6.1.4.1.33.13.1.17.1.25 | basicPortLastOutCharacter | 0 | 0 | The character that most recently went out of the port. Corresponds directly to the value labeled 'Last Char Output:' in the PORT… |
| 1.3.6.1.4.1.33.13.1.17.1.26 | basicPortActiveUserName | 0 | 0 | The user name currently logged into the port. Corresponds directly to the value by the port number and labeled 'Username' in the … |
| 1.3.6.1.4.1.33.13.1.17.1.27 | basicPortDefaultSessionMode | 0 | 0 | Data recognition mode when starting a session, with the following meanings: interactive locally recognize all controls binary… |
| 1.3.6.1.4.1.33.13.1.17.1.28 | basicPortZero | 0 | 0 | Control to zero counters for the port. In response to a get-request or get-next-request, the agent always returns 'ready' for th… |
| 1.3.6.1.4.1.33.13.1.17.1.29 | basicPortZeroTime | 0 | 0 | The number of hundredths of a second since the most recent zeroing of the port's counters, such as through execution of basicPort… |
| 1.3.6.1.4.1.33.13.1.17.1.30 | basicPortUnixCommands | 0 | 0 | Control to allow the user to use Unix-style commands the port. |
| 1.3.6.1.4.1.33.13.1.17.1.31 | basicPortSessionMode | 0 | 0 | Data recognition mode for an active session, with the following meanings: interactive locally recognize all controls binary … |
| 1.3.6.1.4.1.33.13.1.17.1.32 | basicPortRemoteDisconnectNotify | 0 | 0 | If enabled, a BELL (ctrl G) will be sent out the serial port when a remote session is disconnected and the port is logged out. |
| 1.3.6.1.4.1.33.13.1.17.1.33 | basicPortDefaultDestControlled | 0 | 0 | A control to send preconfigured controlled port session strings when entering or exiting a session established to the basicPortDe… |
| 1.3.6.1.4.1.33.13.1.17.1.34 | basicPortControlledPortLogin | 0 | 0 | A control string to send out the serial port upon port login. Corresponds to the hexadecimal code which is represented in ASCII f… |
| 1.3.6.1.4.1.33.13.1.17.1.35 | basicPortControlledPortLogout | 0 | 0 | A control string to send out the serial port upon port logout. Corresponds to the hexadecimal code which is represented in ASCII … |
| 1.3.6.1.4.1.33.13.1.17.1.36 | basicPortControlledSessionInitialize | 0 | 0 | A control string to send out the serial port upon entering a session. Corresponds to the hexadecimal code which represented in AS… |
| 1.3.6.1.4.1.33.13.1.17.1.37 | basicPortControlledSessionTerminate | 0 | 0 | A control string to send out the serial port upon exiting a session. Corresponds to the hexadecimal code which is represented in … |
| 1.3.6.1.4.1.33.13.1.17.1.38 | basicPortRloginTransparentMode | 0 | 0 | A control to pass x'ff' as binary data, not doubling x'ff'. Similar to basicPortSessionMode = transparent but for a rlogin sessio… |
| 1.3.6.1.4.1.33.13.1.17.1.39 | basicPortLoginDuration | 0 | 0 | The amount of time in minutes that a port may remain logged in regardless of the activity on the port. The value 0 indicates that… |
| 1.3.6.1.4.1.33.13.1.17.1.40 | basicPortOutboundSecurity | 0 | 0 | Control to disable outbound security, which can be either Kerberos or SecureID, on a per port basis. Corresponds directly to th… |
| 1.3.6.1.4.1.33.13.1.17.1.41 | basicPortXonTimer | 0 | 0 | Indicates the number of seconds between successive 'XON's sent out a port. A zero signifies that the timer is disabled. Correspon… |
| 1.3.6.1.4.1.33.13.1.17.1.42 | basicPortDefaultDedicatedSessionType | 0 | 0 | A bit mask that specifies the default session type for a dedicated service for this port. The bit numbers are: 1;service name, 2;… |
| 1.3.6.1.4.1.33.13.1.17.1.43 | basicPortIdleTimeReceive | 0 | 0 | Control to restrict the basicPortIdleTimeout to apply to data received from the network and transmitted out the serial port. Data… |
| 1.3.6.1.4.1.33.13.1.17.1.44 | basicPortIdleTimeTransmit | 0 | 0 | Control to restrict the basicPortIdleTimeout to apply to data received from the serial port and transmitted out the LAN. Data rec… |
| 1.3.6.1.4.1.33.13.1.17.1.45 | basicPortZeroDisconnectSession | 0 | 0 | A control to disconnect a session at Port 0 when the password limit is reached. |
| 1.3.6.1.4.1.33.13.1.17.1.46 | basicPortConsolePort | 0 | 0 | Control to configure this port as a console port. This control is only valid on those models with variable configuration ports. T… |
| 1.3.6.1.4.1.33.13.1.17.1.47 | basicPortLoginPassword | 0 | 0 | The password a user must enter to be given the opportunity to log in to a given port. For security reasons reading this object al… |
| 1.3.6.1.4.1.33.13.1.17.1.48 | basicPortSensor | 0 | 0 | Control to configure this port as a temperature and humidity sensor. This control is only valid on those models with variable con… |
| 1.3.6.1.4.1.33.13.1.17.1.49 | basicPortAlarmControl | 0 | 0 | Control to configure this port for alarm input and control output. This control is only valid on those models with variable confi… |
| 1.3.6.1.4.1.33.13.1.17.1.50 | basicPortCommandLogging | 0 | 0 | A control to toggle logging of commands at this port. Command input may be logged from direct terminal connections, session input… |
| 1.3.6.1.4.1.33.13.1.17.1.51 | basicPortBreakSequence | 0 | 0 | A sequence of characters to be sent out the serial port on receipt of a Break from the network in lieu of a hardware break. |
| 1.3.6.1.4.1.33.13.1.17.1.53 | basicPortTl1Mode | 0 | 0 | Controls the TL1 mode of a port. Valid TL1 modes are human- to-machine language (hml), machine-to-machine language (mml), and MML… |
| 1.3.6.1.4.1.33.13.1.17.1.54 | basicPortTl1Console | 0 | 0 | Controls whether this port becomes the TL1 console receiving and displaying autonomous reports of alarm events. A change takes ef… |
| 1.3.6.1.4.1.33.13.1.17.1.55 | basicPortFallThrough | 0 | 0 | Control to allow a user to login to a port after RADIUS or SecurID authentication fails because the RADIUS servers or SecurID ser… |
| 1.3.6.1.4.1.33.13.1.17.1.56 | basicPortCommandLoggingSuppressControlCharacters | 0 | 0 | Control to toggle suppression of control characters in the command log. This object can only be set to enabled when command loggi… |
| 1.3.6.1.4.1.33.13.1.17.1.57 | basicPortDataLogging | 0 | 0 | Control to toggle data logging on the specified port. |
| 1.3.6.1.4.1.33.13.1.17.1.58 | basicPortDataLoggingSuppressControlCharacters | 0 | 0 | Control to toggle suppression of control characters in the data log. This object can only be set to enabled when data logging is … |
| 1.3.6.1.4.1.33.13.1.17.1.59 | basicPortOnboardSecurity | 0 | 0 | A control to toggle onboard security for this port where the username and password are authenticated against an internal access l… |
| 1.3.6.1.4.1.33.13.1.17.1.60 | basicPortFallBack | 0 | 0 | Control to allow a 'fallback' authentication mechanism after RADIUS or SecurID authentication fails because the RADIUS or SecurID… |
| 1.3.6.1.4.1.33.13.1.17.1.61 | basicPortAlarmMaster | 0 | 0 | Control to configure this port for high densitiy alarm input and control output management. This control is only valid on those m… |
| 1.3.6.1.4.1.33.13.1.17.1.62 | basicPortAlarmMasterAccounting | 0 | 0 | Control to toggle logging of alarm events on this port. Use a charPortReset for this change to take effect. |
| 1.3.6.1.4.1.33.13.1.17.1.63 | basicPortAlarmMasterAudibleAlarm | 0 | 0 | Control whether the alarm will have an audible sound for all alarm points attached to this port. |
| 1.3.6.1.4.1.33.13.1.17.1.65 | basicPortAlarmMasterLcdDisplayString | 0 | 0 | Updates the LCD display message for the high density alarm unit attached to the port. Corresponds directly to the DISPLAY AMST co… |
| 1.3.6.1.4.1.33.13.1.17.1.66 | basicPortAlarmMasterReboot | 0 | 0 | Control to reboot the high density alarm unit attached to the port when set to 'execute'. In response to a get-request or get-nex… |
| 1.3.6.1.4.1.33.13.1.17.1.67 | basicPortAlarmMasterUpdateFirmwareHost | 0 | 0 | The internet address of the server to use when downloading a new firmware image for the high density alarm unit attached to this … |
| 1.3.6.1.4.1.33.13.1.17.1.68 | basicPortAlarmMasterUpdateFirmwareFileName | 0 | 0 | The filename to request when downloading a new firmware image for the high density alarm unit attached to this port via TFTP. Corr… |
| 1.3.6.1.4.1.33.13.1.17.1.69 | basicPortAlarmMasterUpdateFirmware | 0 | 0 | Control to update firmware for the high density alarm unit attached to the port when set to 'execute'. In response to a get-reque… |
| 1.3.6.1.4.1.33.13.1.17.1.70 | basicPortAlarmMasterStatus | 0 | 0 | Indicates the current status of the high density alarm unit attached to the port. If no response is obtained from this unit, the … |
| 1.3.6.1.4.1.33.13.1.17.1.71 | basicPortAlarmMasterFaultSeverity | 0 | 0 | Control to determine the severity level associated with the trap sent out when a fault occurs when no response is obtained from t… |
| 1.3.6.1.4.1.33.13.1.17.1.72 | basicPortPowerMaster | 0 | 0 | Control to configure this port as a power master port. This control is only valid on those models with variable configuration por… |
| 1.3.6.1.4.1.33.13.1.17.1.73 | basicPortPowerMasterTimeDelay | 0 | 0 | Control to set the power up delay interval in milliseconds for the power device attached to this port. |
| 1.3.6.1.4.1.33.13.1.17.1.74 | basicPortPowerMasterSwitch | 0 | 0 | Control to power on or off all of the outlets in the power device attached to this port. A get-request always returns ready. |
| 1.3.6.1.4.1.33.13.1.17.1.75 | basicPortPowerMasterModel | 0 | 0 | The model number of the power master device, which is connected to this port. |
| 1.3.6.1.4.1.33.13.1.17.1.76 | basicPortPowerMasterSerialNumber | 0 | 0 | The serial number of the power master device, which is connected to this port. |
| 1.3.6.1.4.1.33.13.1.17.1.77 | basicPortPowerMasterFirmware | 0 | 0 | The firmware version of the power master device, which is connected to this port. |
| 1.3.6.1.4.1.33.13.1.17.1.78 | basicPortLockout | 0 | 0 | Control to prohibit access to this port and send a trap when login authentication fails. One must log out the port for this chang… |
| 1.3.6.1.4.1.33.13.1.17.1.79 | basicPortAsciiToTrapTranslation | 0 | 0 | Control to configure the port as an ascii-to-trap translator. One must log out the port for this change to take effect. |
| 1.3.6.1.4.1.33.13.1.17.1.80 | basicPortAsciiToTrapTranslationTrapSeverity | 0 | 0 | Control to determine the severity level associated with the trap sent out from this port. One must log out the port for this chan… |
| 1.3.6.1.4.1.33.13.1.17.1.81 | basicPortAsciiToTrapTranslationMessages | 0 | 0 | Count of number of trap messages sent from this port. |
| 1.3.6.1.4.1.33.13.1.17.1.82 | basicPortAsciiToTrapTranslationLastMessage | 0 | 0 | The last message or partial message sent out by this port. |
| 1.3.6.1.4.1.33.13.1.17.1.83 | basicPortPowerMasterAlarmSeverity | 0 | 0 | Control to determine the severity level associated with the trap sent out when the power device is not responding to this port. |
| 1.3.6.1.4.1.33.13.1.17.1.84 | basicPortPowerMasterDeviceStatus | 0 | 0 | Indicates the current status of the power device controlled by this port. If the device is responding, the status is cleared. Ot… |
| 1.3.6.1.4.1.33.13.1.17.1.85 | basicPortBuffering | 0 | 0 | Control to allow data from an attached device to be retained across multiple sessions. When a session is established to a port wi… |
| 1.3.6.1.4.1.33.13.1.17.1.86 | basicPortLogFacilityLevel | 0 | 0 | Indicates that server originated accounting messages pertaining to this port are logged to the syslog host at this UNIX facility … |
| 1.3.6.1.4.1.33.13.1.17.1.87 | basicPortPppDialBackup | 0 | 0 | Indicates whether this port is configured as a PPP dial backup port. This parameter will not take effect until the port is logged… |
| 1.3.6.1.4.1.33.13.1.17.1.88 | basicPortPppDialBackupNumber | 0 | 0 | The number to dial when a PPP dial backup link is activated, which occurs when the network is down and there are SNMP traps to fo… |
| 1.3.6.1.4.1.33.13.1.17.1.89 | basicPortPppDialBackupRedialTimer | 0 | 0 | Indicates the time in seconds to wait before redialing the basicPortPppDialBackupNumber on a basicPortPppDialBackup port. |
| 1.3.6.1.4.1.33.13.1.17.1.90 | basicPortPppDialBackupRedialRetries | 0 | 0 | Indicates the number of time to try to dial the backup number before recording an error, logging out the port, and if there are n… |
| 1.3.6.1.4.1.33.13.1.17.1.91 | basicPortPppDialBackupDisconnectTimer | 0 | 0 | Indicates the time in seconds that the dial backup link will stay up when there is no more SNMP traffic flowing prior to disconne… |
| 1.3.6.1.4.1.33.13.1.17.1.92 | basicPortPppDialBackupLocalAddress | 0 | 0 | The local address to use in a PPP dial backup link when the network connection is down and there are SNMP traps to forward. |
| 1.3.6.1.4.1.33.13.1.17.1.93 | basicPortPppDialBackupDestinationAddress | 0 | 0 | The destination address to use in a PPP dial backup link when the network connection is down and there are SNMP traps to forward. |
| 1.3.6.1.4.1.33.13.1.17.1.94 | basicPortPppDialBackupAddresses | 0 | 0 | Control to initiate dialing from a dial backup port. In response to get-request or get-next-request, the agent always returns 're… |