The ifIndex of the iTouch interface to which
this circuit is attached. The value may be
0 for default circuits which indicates that a
new iTouch interface should be created when the
default circuit is copied.
Parsed from file it-router-12.mib.txt
Company: inreach
Module: IT-ROUTER-12
xCircAdminIf OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The ifIndex of the iTouch interface to which this circuit is attached. The value may be 0 for default circuits which indicates that a new iTouch interface should be created when the default circuit is copied." ::= { xCircuitAdmnEntry 1 }
Vendor: In-Reach
Module: IT-ROUTER-12 (it-router-12.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.24.5.1.1.2 | xCircCallType | 0 | 0 | The type of link on which this circuit can be used. This field is not modifiable for default circuits. The value 0 is for no ca… |
| 1.3.6.1.4.1.33.24.5.1.1.3 | xCircCallWhen | 0 | 0 | Controls when the circuit will be dialed by the system. |
| 1.3.6.1.4.1.33.24.5.1.1.4 | xCircAdminProtocol | 0 | 0 | Controls the encapsulation and feature negotiation to be used on this circuit. The value auto may only be set on default circuit… |
| 1.3.6.1.4.1.33.24.5.1.1.5 | xCircDialback | 0 | 0 | Controls when the circuit will dial back the caller when a call is received on this circuit. |
| 1.3.6.1.4.1.33.24.5.1.1.6 | xCircMaxForwardDelay | 0 | 0 | The number of milliseconds that a packet may be held on the Wan link before it will be discarded. The value 0 indicates no limit. |
| 1.3.6.1.4.1.33.24.5.1.1.7 | xCircMaxMultiForwardDelay | 0 | 0 | The number of milliseconds that a multicast packet may be held on the Wan link before it will be discarded. The value 0 indicat… |
| 1.3.6.1.4.1.33.24.5.1.1.8 | xCircProtocolBaseTimer | 0 | 0 | Controls how often the protocol sends out its maintenance messages and subsequently how fast the circuit can detect when it goes … |
| 1.3.6.1.4.1.33.24.5.1.1.9 | xCircAdminSpeed | 0 | 0 | The speed that the software should use for the circuit The value 0 indicates that the speed inherited from the link should be use… |
| 1.3.6.1.4.1.33.24.5.1.1.10 | xCircConnectTimer | 0 | 0 | The number of seconds to wait for the circuit protocol to believe the circuit has come up after answering a call or establishing … |
| 1.3.6.1.4.1.33.24.5.1.1.11 | xCircIdleTimer | 0 | 0 | The number of seconds to wait for the circuit without sending or receiving a data packet before bringing down the circuit if it w… |
| 1.3.6.1.4.1.33.24.5.1.1.12 | xCircRestartTimer | 0 | 0 | If this circuit failed to be dialed, the system will wait this time after failing to establish the call retry count timers before… |
| 1.3.6.1.4.1.33.24.5.1.1.13 | xCircRetryCount | 0 | 0 | The number of times the circuit will be retried for dialing before it goes into the restart waiting state. |
| 1.3.6.1.4.1.33.24.5.1.1.14 | xCircRetryTimer | 0 | 0 | If this circuit failed to be dialed, the system will wait this time before retrying to dial the circuit. |
| 1.3.6.1.4.1.33.24.5.1.1.15 | xCircAnswerPriority | 0 | 0 | The priority of a call answered on this circuit. |
| 1.3.6.1.4.1.33.24.5.1.1.16 | xCircIfDialPriority | 0 | 0 | The priority of a call dialed on this circuit because the circuit is dial always or dial on demand. |
| 1.3.6.1.4.1.33.24.5.1.1.17 | xCircMaxConnectTime | 0 | 0 | The maximum number of seconds for which a call answered on this circuit may be active. The value 0 indicates indefinitely. |
| 1.3.6.1.4.1.33.24.5.1.1.18 | xCircPartnerBridgeOnly | 0 | 0 | The maximum number of seconds for which a call answered on this circuit may be active. The value 0 indicates indefinitely. |
| 1.3.6.1.4.1.33.24.5.1.1.19 | xCircDialConnectTimer | 0 | 0 | The number of seconds to wait for a call to be brought up or answered. This is used by only circuits of some xCircCallTypes. A v… |
| 1.3.6.1.4.1.33.24.5.1.1.20 | xCircTimeRemaining | 0 | 0 | The time remaining for the circuit when it is active before it will be disconnected. Setting this value will reset how many seco… |
| 1.3.6.1.4.1.33.24.5.1.1.21 | xCircDialLink | 0 | 0 | A bitmap of the links on which this circuit can be used. This can only be written for link based circuits. |
| 1.3.6.1.4.1.33.24.5.1.1.22 | xCircDodMaxQueueSize | 0 | 0 | Controls the number of packets that will be held while trying to bring up a demand circuit. |
| 1.3.6.1.4.1.33.24.5.1.1.23 | xCircAdminState | 0 | 0 | Controls whether the circuit can be used. |
| 1.3.6.1.4.1.33.24.5.1.1.24 | xCircPartnerEthAddress | 0 | 0 | The assumed ethernet address of the circuit's partner. This is only used for end system partners who dial in and request an ether… |
| 1.3.6.1.4.1.33.24.5.1.1.25 | xCircPartnerIpAddress | 0 | 0 | The assumed IP address of the circuit's partner. This is only used for end system partners who dial in and request an IP address … |
| 1.3.6.1.4.1.33.24.5.1.1.26 | xCircEventLogging | 0 | 0 | Controls whether events will be logged for this circuit. |
| 1.3.6.1.4.1.33.24.5.1.1.27 | xCircRowStatus | 0 | 0 | Setting this object to active(1) activates the circuit. This is equivalent to creating the circuit. Setting this object to notInS… |
| 1.3.6.1.4.1.33.24.5.1.1.28 | xCircTimeMaxOutputQueueSize | 0 | 0 | The size of the output queue. |
| 1.3.6.1.4.1.33.24.5.1.1.29 | xCircDodDemandDelayTime | 0 | 0 | Controls the amount of time a demand circuit will wait after connecting to its partner before sending packets contained in the ci… |
| 1.3.6.1.4.1.33.24.5.1.1.30 | xCircSameAs | 0 | 0 | This object allows the user to clone a circuit from another circuit. It is the equivalent of the User interface command define ci… |
| 1.3.6.1.4.1.33.24.5.1.1.31 | xCircDialPeriodicTime | 0 | 0 | The number of minutes for the period. If during this period, the maximum periodic dial attempts of connect time is exceeded, the… |
| 1.3.6.1.4.1.33.24.5.1.1.32 | xCircDialTrapThreshold | 0 | 0 | The threshold that an SNMP trap will be generated warning that the circuit may be either disabled or temporarily prohibited from … |
| 1.3.6.1.4.1.33.24.5.1.1.33 | xCircMaxDialTime | 0 | 0 | The maximum number of minutes before a dialed call will be disconnected and the circuit will be disabled. The administrator will … |
| 1.3.6.1.4.1.33.24.5.1.1.34 | xCircMaxAnswerTime | 0 | 0 | The maximum number of minutes before an answered call will be disconneted. The value 0 indicates there is no limit. |
| 1.3.6.1.4.1.33.24.5.1.1.35 | xCircMaxPeriodicDialAttempt | 0 | 0 | The maximum number of times this circuit can be dialed during the periodic time before it will be prohibited from dialing. The c… |
| 1.3.6.1.4.1.33.24.5.1.1.36 | xCircMaxPeriodicDialTime | 0 | 0 | The maximum number of minutes before a dialed call will be disconnected and the circuit will be prohibited from dialing. The cir… |
| 1.3.6.1.4.1.33.24.5.1.1.37 | xCircPartnerIpAdv | 0 | 0 | Setting this object to local(2) will add all negotiated PPP ip addresses as host routes to the ip routing table. Setting this obj… |
| 1.3.6.1.4.1.33.24.5.1.1.38 | xCircQuerytimeNegotiate | 0 | 0 | Setting this object to enabled(2) causes the circuit to be dialed automatically after a reboot if the unit does not have a batter… |
| 1.3.6.1.4.1.33.24.5.1.1.39 | xCircPartnerType | 0 | 0 | This object defines the partner type associated with this circuit. |
| 1.3.6.1.4.1.33.24.5.1.1.40 | xCircPacing | 0 | 0 | This object defines the circuit pacing method for this circuit. Disabled(1) implies no pacing, limited means that the throughput… |
| 1.3.6.1.4.1.33.24.5.1.1.41 | xCircCfgThroughput | 0 | 0 | This object defines throughput value for a circuit which is used by pacing when the xCircPacing object is set to limited. |
| 1.3.6.1.4.1.33.24.5.1.1.42 | xCircPrQueState | 0 | 0 | This object defines whether or not priority queuing is enabled. The xCircPacing must be set to something other than disabled if p… |