Setting this object to active(1) activates the
rule. This is equivalent to creating the rule.
Setting this object to notInService(2) takes this
rule out of service. This is equivalent to deleting
the rule. Only active rules are returned for GETs and
GETNEXTs.
Parsed from file it-router-12.mib.txt
Company: inreach
Module: IT-ROUTER-12
xBbdRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to active(1) activates the rule. This is equivalent to creating the rule. Setting this object to notInService(2) takes this rule out of service. This is equivalent to deleting the rule. Only active rules are returned for GETs and GETNEXTs." ::= { xBbdConfigEntry 25 }
Vendor: In-Reach
Module: IT-ROUTER-12 (it-router-12.mib)
Type: TABULAR
Access: read-write
Syntax: RowStatus
Automatically extracted from www.mibdepot.com
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33.24.7.2.1.1.1 | xBbdIndex | 0 | 0 | The number of the rule. |
| 1.3.6.1.4.1.33.24.7.2.1.1.2 | xBbdName | 0 | 0 | The name of the rule. |
| 1.3.6.1.4.1.33.24.7.2.1.1.3 | xBbdAdminState | 0 | 0 | Controls whether this Bbd rule is enabled or disabled. |
| 1.3.6.1.4.1.33.24.7.2.1.1.4 | xBbdPrimaryAddress | 0 | 0 | The address of the unit whose circuit/link should be monitored. 00-00-00-00-00-00 is this unit. |
| 1.3.6.1.4.1.33.24.7.2.1.1.5 | xBbdPrimaryIfType | 0 | 0 | xBbdPrimaryIftype |
| 1.3.6.1.4.1.33.24.7.2.1.1.6 | xBbdPrimaryIf | 0 | 0 | The circuit or link being monitored. 0 indicates nothing is being monitored by this rule. |
| 1.3.6.1.4.1.33.24.7.2.1.1.7 | xBbdPrimaryName | 0 | 0 | The name of the primary circuit/link. |
| 1.3.6.1.4.1.33.24.7.2.1.1.8 | xBbdPrimaryPollTimer | 0 | 0 | The number of seconds to wait before polling the primary circuit/link again. |
| 1.3.6.1.4.1.33.24.7.2.1.1.9 | xBbdFailureBackup | 0 | 0 | Controls whether the primary circuit/link will be backed up if the primary circuit/link fails. |
| 1.3.6.1.4.1.33.24.7.2.1.1.10 | xBbdUpUtilization | 0 | 0 | The high threshold utilization of the primary circuit/link which must be exceeded for this rule to try to bring up a(nother) back… |
| 1.3.6.1.4.1.33.24.7.2.1.1.11 | xBbdDownUtilization | 0 | 0 | The low threshold utilization of the primary circuit/link which must be exceeded for this rule to try to bring down a(nother) bac… |
| 1.3.6.1.4.1.33.24.7.2.1.1.12 | xBbdDampeningFactor | 0 | 0 | The number of polling measurements to average when calculating the primary circuit/link's utilization. |
| 1.3.6.1.4.1.33.24.7.2.1.1.13 | xBbdUpHoldTimer | 0 | 0 | The number of seconds after a backup circuit has been brought up before the primary link should be polled again. |
| 1.3.6.1.4.1.33.24.7.2.1.1.14 | xBbdDownHoldTimer | 0 | 0 | The number of seconds after a backup circuit has been brought down before the primary link should be polled again. |
| 1.3.6.1.4.1.33.24.7.2.1.1.15 | xBbdPriority | 0 | 0 | The priority associated with the rule. |
| 1.3.6.1.4.1.33.24.7.2.1.1.16 | xBbdMaxActiveChoices | 0 | 0 | The maximum number of circuits that can be brought up by the rule. |
| 1.3.6.1.4.1.33.24.7.2.1.1.17 | xBbdDisableDelay | 0 | 0 | The number of seconds the primary circuit/link must not exceed the down utilization before a backup circuit will be brought down. |
| 1.3.6.1.4.1.33.24.7.2.1.1.18 | xBbdEnableDelay | 0 | 0 | The number of seconds the primary circuit/link must exceed the up utilization before a backup circuit will be brought up. |
| 1.3.6.1.4.1.33.24.7.2.1.1.19 | xBbdEventLogging | 0 | 0 | Controls whether events will be logged for this Bbd rule. |
| 1.3.6.1.4.1.33.24.7.2.1.1.20 | xBbdSecondaryAddress | 0 | 0 | The address of the secondary unit whose circuit/link should be monitored. 00-00-00-00-00-00 is this unit. |
| 1.3.6.1.4.1.33.24.7.2.1.1.21 | xBbdSecondaryIfType | 0 | 0 | xBbdSecondaryIftype |
| 1.3.6.1.4.1.33.24.7.2.1.1.22 | xBbdSecondaryIf | 0 | 0 | The secondary circuit or link being monitored. 0 indicates nothing is being monitored by this rule. |
| 1.3.6.1.4.1.33.24.7.2.1.1.23 | xBbdSecondaryName | 0 | 0 | The name of the secondary circuit/link. |
| 1.3.6.1.4.1.33.24.7.2.1.1.24 | xBbdSecondaryDownUtil | 0 | 0 | The low threshold utilization of the secondary circuit/link which must be exceeded for this rule to try to bring down a(nother) b… |
| 1.3.6.1.4.1.33.24.7.2.1.1.26 | xBbdUtilizationToUse | 0 | 0 | This objects controls which utilization is used on a primary circuit to control the activation and deactivation of the backup cir… |
| 1.3.6.1.4.1.33.24.7.2.1.1.27 | xBbdSecondaryUtilizationToUse | 0 | 0 | This objects controls which utilization is used on a secondary circuit to control the activation and deactivation of the backup c… |