Sets how the clocking will be supplied for Data Port 1 on the
T1 module.
Parsed from file micom.mib.txt
Company: None
Module: MICOM-NODE-MIB
Sets how the clocking will be supplied for Data Port 1 on the
T1 module.
Parsed from file MICOM-NODE-MIB.mib
Module: MICOM-NODE-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
t1CfgDataPort1Timing OBJECT-TYPE SYNTAX INTEGER { internallySuppliedNormal (1), tailCircuit (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Sets how the clocking will be supplied for Data Port 1 on the T1 module." ::= {t1CfgGroup 11}
t1CfgDataPort1Timing OBJECT-TYPE SYNTAX INTEGER { internallySuppliedNormal (1), tailCircuit (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Sets how the clocking will be supplied for Data Port 1 on the T1 module." ::= {t1CfgGroup 11}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.11.0 | t1CfgDataPort1Timing | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.1 | t1CfgDSX1FrameFormat | 1 | 1 | Configures the local T1 interface frame formats to either (SF) super frame or (ESF) extended super frame. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.2 | t1CfgDSX1LineCode | 1 | 1 | Configures the line coding method (at the Local interface) either to Alternate Mark Inversion (AMI) coding or Bipolar Eight Zero… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.3 | t1CfgDSX1IdleCode | 1 | 1 | Configures the idle code character at the local T1 interface. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.4 | t1CfgDSX1lineBuildout | 1 | 1 | Configures a transmitter attenuation parameter based on various cable lengths, reflecting the distance from the T1 Access Module… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.5 | t1CfgDSX1NetworkInvokedLoopback | 1 | 1 | Enables/Disables the DSX1 Network-invoked loopback on the T1 module. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.6 | t1CfgDS1FrameFormat | 1 | 1 | Configures the network T1 interface frame formats to either (SF) super frame or (ESF) extended super frame. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.7 | t1CfgDS1LineCode | 1 | 1 | Configures the line coding method (at the Network interface) either to Alternate Mark Inversion (AMI) coding or Bipolar Eight Ze… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.8 | t1CfgDS1IdleCode | 1 | 1 | Configures the idle code character at the network T1 interface. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.9 | t1CfgDS1NetworkInvokedLoopback | 1 | 1 | Enables/Disables the DS1 Network-invoked loopback on the T1 module. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.10 | t1CfgDataPort1Rate | 1 | 1 | Sets the base rate of Data Port channel 1 on the T1 module. The actual rate will be determined by the following formula: rate of … |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.12 | t1CfgDataPort1DTRControl | 1 | 1 | Sets the DTR control for Data Port 1 on the T1 module. Option (1), dtrNormal, will configure DTR control from the DTE equipment… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.13 | t1CfgDataPort1RTSControl | 1 | 1 | Sets the RTS control for Data Port 1 on the T1 module. Option (1), rtsNormal, will configure RTS control from the DTE equipment… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.14 | t1CfgDataPort2Rate | 1 | 1 | Sets the base rate of Data Port channel 2 on the T1 module. The actual rate will be determined by the following formula: rate of … |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.15 | t1CfgDataPort2Timing | 1 | 1 | Sets how the clocking will be supplied for Data Port 2 on the T1 module. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.16 | t1CfgDataPort2DTRControl | 1 | 1 | Sets the DTR control for Data Port 2 on the T1 module. Option (1), dtr, will configure DTR control from the DTE equipment. Optio… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.17 | t1CfgDataPort2RTSControl | 1 | 1 | Sets the RTS control for Data Port 2 on the T1 module. Option (1), rts, will configure RTS control from the DTE equipment. Optio… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.18 | t1CfgCCMLinkA1Rate | 1 | 1 | Sets the base rate of the CCM A1 channel for a T1 interface. The actual rate will be determined by the following formula: rate of… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.19 | t1CfgCCMLinkA2Rate | 1 | 1 | Sets the base rate of the CCM A2 channel for a T1 interface. The actual rate will be determined by the following formula: rate of… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.20 | t1CfgCCMLinkA3Rate | 1 | 1 | Sets the base rate of the CCM A3 channel for a T1 interface. The actual rate will be determined by the following formula: rate of… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.21 | t1CfgCCMLinkA4Rate | 1 | 1 | Sets the base rate of the CCM A4 channel for a T1 interface. The actual rate will be determined by the following formula: rate of… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.22 | t1CfgCCMLinkA5Rate | 1 | 1 | Sets the base rate of the CCM A5 channel for a T1 interface. The actual rate will be determined by the following formula: rate of… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.23 | t1CfgCCMLinkA6Rate | 1 | 1 | Sets the base rate of the CCM A6 channel for a T1 interface. The actual rate will be determined by the following formula: rate of… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.24 | t1CfgSystemClockSource | 1 | 1 | Configures the source of the clock used in the T1 Access Module. Options include: - DSX-1. The clock source is from the DSX-1 int… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.25 | t1CfgDS1Config | 1 | 1 | This object is a write only object that will signal the proxy to start caching changes to the DS1 ds0 connection tables. This i… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.26 | t1CfgDSX1Config | 1 | 1 | This object is a write only object that will signal the proxy to start caching changes to the DSX1 ds0 connection tables. This … |