This object is a write only object that will signal the proxy to
start caching changes to the DSX1 ds0 connection tables. This is done to
solve an anomaly in the marathon/t1 design. The manager must set
this object to init before updating any of the t1DSX1InterfaceTable objects.
When all the changes have been set then this object will have to be set to
commit (2). The init will cause the proxy to upload the table from the marathon
and the commit will cause the proxy to send all the changes to the marathon.
Parsed from file micom.mib.txt
Company: None
Module: MICOM-NODE-MIB
This object is a write only object that will signal the proxy to
start caching changes to the DSX1 ds0 connection tables. This is done to
solve an anomaly in the marathon/t1 design. The manager must set
this object to init before updating any of the t1DSX1InterfaceTable objects.
When all the changes have been set then this object will have to be set to
commit (2). The init will cause the proxy to upload the table from the marathon
and the commit will cause the proxy to send all the changes to the marathon.
Parsed from file MICOM-NODE-MIB.mib
Module: MICOM-NODE-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
t1CfgDSX1Config OBJECT-TYPE SYNTAX INTEGER { init (1), commit (2) } ACCESS write-only STATUS mandatory DESCRIPTION "This object is a write only object that will signal the proxy to start caching changes to the DSX1 ds0 connection tables. This is done to solve an anomaly in the marathon/t1 design. The manager must set this object to init before updating any of the t1DSX1InterfaceTable objects. When all the changes have been set then this object will have to be set to commit (2). The init will cause the proxy to upload the table from the marathon and the commit will cause the proxy to send all the changes to the marathon." ::= {t1CfgGroup 26}
t1CfgDSX1Config OBJECT-TYPE SYNTAX INTEGER { init (1), commit (2) } ACCESS write-only STATUS mandatory DESCRIPTION "This object is a write only object that will signal the proxy to start caching changes to the DSX1 ds0 connection tables. This is done to solve an anomaly in the marathon/t1 design. The manager must set this object to init before updating any of the t1DSX1InterfaceTable objects. When all the changes have been set then this object will have to be set to commit (2). The init will cause the proxy to upload the table from the marathon and the commit will cause the proxy to send all the changes to the marathon." ::= {t1CfgGroup 26}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.26.0 | t1CfgDSX1Config | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.1 | t1CfgDSX1FrameFormat | 1 | 1 | Configures the local T1 interface frame formats to either (SF) super frame or (ESF) extended super frame. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.2 | t1CfgDSX1LineCode | 1 | 1 | Configures the line coding method (at the Local interface) either to Alternate Mark Inversion (AMI) coding or Bipolar Eight Zero… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.3 | t1CfgDSX1IdleCode | 1 | 1 | Configures the idle code character at the local T1 interface. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.4 | t1CfgDSX1lineBuildout | 1 | 1 | Configures a transmitter attenuation parameter based on various cable lengths, reflecting the distance from the T1 Access Module… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.5 | t1CfgDSX1NetworkInvokedLoopback | 1 | 1 | Enables/Disables the DSX1 Network-invoked loopback on the T1 module. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.6 | t1CfgDS1FrameFormat | 1 | 1 | Configures the network T1 interface frame formats to either (SF) super frame or (ESF) extended super frame. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.7 | t1CfgDS1LineCode | 1 | 1 | Configures the line coding method (at the Network interface) either to Alternate Mark Inversion (AMI) coding or Bipolar Eight Ze… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.8 | t1CfgDS1IdleCode | 1 | 1 | Configures the idle code character at the network T1 interface. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.9 | t1CfgDS1NetworkInvokedLoopback | 1 | 1 | Enables/Disables the DS1 Network-invoked loopback on the T1 module. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.10 | t1CfgDataPort1Rate | 1 | 1 | Sets the base rate of Data Port channel 1 on the T1 module. The actual rate will be determined by the following formula: rate of … |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.11 | t1CfgDataPort1Timing | 1 | 1 | Sets how the clocking will be supplied for Data Port 1 on the T1 module. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.12 | t1CfgDataPort1DTRControl | 1 | 1 | Sets the DTR control for Data Port 1 on the T1 module. Option (1), dtrNormal, will configure DTR control from the DTE equipment… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.13 | t1CfgDataPort1RTSControl | 1 | 1 | Sets the RTS control for Data Port 1 on the T1 module. Option (1), rtsNormal, will configure RTS control from the DTE equipment… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.14 | t1CfgDataPort2Rate | 1 | 1 | Sets the base rate of Data Port channel 2 on the T1 module. The actual rate will be determined by the following formula: rate of … |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.15 | t1CfgDataPort2Timing | 1 | 1 | Sets how the clocking will be supplied for Data Port 2 on the T1 module. |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.16 | t1CfgDataPort2DTRControl | 1 | 1 | Sets the DTR control for Data Port 2 on the T1 module. Option (1), dtr, will configure DTR control from the DTE equipment. Optio… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.17 | t1CfgDataPort2RTSControl | 1 | 1 | Sets the RTS control for Data Port 2 on the T1 module. Option (1), rts, will configure RTS control from the DTE equipment. Optio… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.18 | t1CfgCCMLinkA1Rate | 1 | 1 | Sets the base rate of the CCM A1 channel for a T1 interface. The actual rate will be determined by the following formula: rate of… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.19 | t1CfgCCMLinkA2Rate | 1 | 1 | Sets the base rate of the CCM A2 channel for a T1 interface. The actual rate will be determined by the following formula: rate of… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.20 | t1CfgCCMLinkA3Rate | 1 | 1 | Sets the base rate of the CCM A3 channel for a T1 interface. The actual rate will be determined by the following formula: rate of… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.21 | t1CfgCCMLinkA4Rate | 1 | 1 | Sets the base rate of the CCM A4 channel for a T1 interface. The actual rate will be determined by the following formula: rate of… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.22 | t1CfgCCMLinkA5Rate | 1 | 1 | Sets the base rate of the CCM A5 channel for a T1 interface. The actual rate will be determined by the following formula: rate of… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.23 | t1CfgCCMLinkA6Rate | 1 | 1 | Sets the base rate of the CCM A6 channel for a T1 interface. The actual rate will be determined by the following formula: rate of… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.24 | t1CfgSystemClockSource | 1 | 1 | Configures the source of the clock used in the T1 Access Module. Options include: - DSX-1. The clock source is from the DSX-1 int… |
| 1.3.6.1.4.1.335.1.2.1.3.6.1.3.25 | t1CfgDS1Config | 1 | 1 | This object is a write only object that will signal the proxy to start caching changes to the DS1 ds0 connection tables. This i… |