The link quality of service set in packets sent to client. Default:None.
Parsed from file F5-BIGIP-LOCAL-MIB.txt
Company: None
Module: F5-BIGIP-LOCAL-MIB
The link quality of service set in packets sent to client. Default:None.
Parsed from file F5-BIGIP-LOCAL-MIB.mib
Module: F5-BIGIP-LOCAL-MIB
Vendor: F5 Labs, Inc.
Module: F5-BIGIP-LOCAL-MIB
[Automatically extracted from oidview.com]
ltmTcpProfileLinkQosToClient OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The link quality of service set in packets sent to client. Default:None." ::= { ltmTcpProfileEntry 21 }
ltmTcpProfileLinkQosToClient OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The link quality of service set in packets sent to client. Default:None." ::= { ltmTcpProfileEntry 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.1 | ltmTcpProfileName | 0 | 0 | The name of a TCP profile. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.2 | ltmTcpProfileConfigSource | 0 | 0 | The state that specifies whether this is a base/pre-configured profile or user defined profile. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.3 | ltmTcpProfileDefaultName | 0 | 0 | The name of the profile from which the specified profile derives its attribute default values. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.4 | ltmTcpProfileResetOnTimeout | 0 | 0 | The feature of reset for idle timeout. If true and a TCP connection exceeds its idle_timeout, send a reset in addition to deletin… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.5 | ltmTcpProfileTimeWaitRecycle | 0 | 0 | Recycle connection when SYN is received in TIME-WAIT state. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.6 | ltmTcpProfileDelayedAcks | 0 | 0 | If true, Enable delayed ACK to allow coalescing of multiple ACK responses. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.7 | ltmTcpProfileProxyMss | 0 | 0 | Whether or not to proxy maximum segment size. If true, advertise the same mss to the server as was negotiated with the client. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.8 | ltmTcpProfileProxyOptions | 0 | 0 | Whether or not to proxy an option. If true, advertise an option (e.g. time-stamps) to the server only if it was negotiated with t… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.9 | ltmTcpProfileProxyBufferLow | 0 | 0 | The proxy buffer level at which the receive window is opened. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.10 | ltmTcpProfileProxyBufferHigh | 0 | 0 | The proxy buffer level at which the receive window is closed. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.11 | ltmTcpProfileIdleTimeout | 0 | 0 | The number of seconds without traffic before a connection is eligible for deletion. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.12 | ltmTcpProfileTimeWaitTimeout | 0 | 0 | The milliseconds in TIME-WAIT before entering CLOSED state. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.13 | ltmTcpProfileFinWaitTimeout | 0 | 0 | The number of seconds to remain in FIN-WAIT or CLOSING state before giving up. Zero is forever (or until maxrtx of FIN). |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.14 | ltmTcpProfileCloseWaitTimeout | 0 | 0 | The number of seconds to remain in LAST-ACK state before giving up. Zero is forever (or until maxrtx of FIN). |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.15 | ltmTcpProfileSndbuf | 0 | 0 | Send buffer size in bytes. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.16 | ltmTcpProfileRcvwnd | 0 | 0 | Receive window size in bytes. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.17 | ltmTcpProfileKeepAliveInterval | 0 | 0 | Keep alive probe interval in milliseconds. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.18 | ltmTcpProfileSynMaxrtx | 0 | 0 | The maximum number of retransmissions of SYN segments. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.19 | ltmTcpProfileMaxrtx | 0 | 0 | The maximum number of retransmissions of data segments. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.20 | ltmTcpProfileIpTosToClient | 0 | 0 | The IP type of service set in packets sent to client. Default:None. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.22 | ltmTcpProfileDeferredAccept | 0 | 0 | The state that if true, defers allocation of connection chain context until payload from client has been seen. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.23 | ltmTcpProfileSelectiveAcks | 0 | 0 | The state that if true, enable RFC2018 Selective Acknowledgements. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.24 | ltmTcpProfileEcn | 0 | 0 | The state that if true, enable RFC3168 Extended Congestion Notification (ECN). |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.25 | ltmTcpProfileLimitedTransmit | 0 | 0 | The state that if true, enables support for RFC3042 Limited Transmit Recovery |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.26 | ltmTcpProfileHighPerfTcpExt | 0 | 0 | ltmTcpProfileHighPerftcpExt |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.27 | ltmTcpProfileSlowStart | 0 | 0 | The state if true, enable TCP slow-start by default. We use RFC3390 to slow-start rather than traditional congestion avoidance m… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.28 | ltmTcpProfileBandwidthDelay | 0 | 0 | The state if true, attempt to calculate the optimal bandwidth to use to the peer based on throughput and round-trip time, and don… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.29 | ltmTcpProfileNagle | 0 | 0 | The state if true, delay sending data < MSS in size unless all prior data has been ACKed. This leads to less in-flight small-data, and less chance fo… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.30 | ltmTcpProfileAckOnPush | 0 | 0 | The state if true, data-bearing in-order TCP segments will elicit immediate ACKs from us if they have the PUSH flag set, regardl… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.31 | ltmTcpProfileMd5Sig | 0 | 0 | The state if true, use RFC2385 TCP-MD5 signatures to protect TCP traffic against intermediate tampering. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.32 | ltmTcpProfileMd5SigPass | 0 | 0 | This is a plaintext passphrase which may be between 1 and 80 characters in length, and is used in a shared-secret scheme to imple… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.33 | ltmTcpProfileAbc | 0 | 0 | The state that if it is true, count the number of bytes acked rather than the number of returning ACKs from the peer when in the … |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.34 | ltmTcpProfileCongestionCtrl | 0 | 0 | The TCP congestion control mode, guiding cwnd growth. reno - RENO congestion control mode; newreno - new RENO congestion control … |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.35 | ltmTcpProfileDsack | 0 | 0 | The state that if true, enable support for RFC2883 D-SACK (Duplicate Selective Acknowledgement). |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.36 | ltmTcpProfileCmetricsCache | 0 | 0 | The state that if true, use the routing table metrics cache to retrieve the last-known tcp congestion parameters. (Congestion win… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.37 | ltmTcpProfileVerifiedAccept | 0 | 0 | The state that if true, the device must not respond to the clients SYN with a SYN-ACK until it receives a SYN-ACK from the server… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.38 | ltmTcpProfilePktLossIgnoreRate | 0 | 0 | Specifies the threshold of packets lost per million at which the system should perform congestion control. Measured in packets p… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.39 | ltmTcpProfilePktLossIgnoreBurst | 0 | 0 | Specifies the likelihood of performing congestion control when multiple packets in a row are lost even if the loss threshold has… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.40 | ltmTcpProfileZeroWindowTimeout | 0 | 0 | Specifies the timeout in milliseconds for terminating a connection with an effective zero length TCP transmit window. The timeou… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.41 | ltmTcpProfileInitCwnd | 0 | 0 | Initial congestion window size for connections to this destination. Actual window size is this value multiplied by the MSS (Maxi… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.42 | ltmTcpProfileInitRwnd | 0 | 0 | Initial receive window size for connections to this destination. The actual window size is this value multiplied by the MSS (Max… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.43 | ltmTcpProfileDelayWindowControl | 0 | 0 | If enabled, uses an estimate of queueing delay as a measure of congestion to control, in addition to the normal loss based contr… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.44 | ltmTcpProfileSynRtoBase | 0 | 0 | Initial RTO (Retransmission TimeOut) base multiplier for SYN retransmission, specified in milliseconds. This value is modified b… |