Initial receive window size for connections to this destination. The actual window size is this value
multiplied by the MSS (Maximal Segment Size) of the connection. The default value is zero, meaning
to use Slow Start value. Allowed values are in the range of 0 to 16.
Parsed from file F5-BIGIP-LOCAL-MIB.txt
Company: f5
Module: F5-BIGIP-LOCAL-MIB
Vendor: F5
Module: F5-BIGIP-LOCAL-MIB (F5-BIGIP-LOCAL-MIB)
Type: TABULAR
Access: read-only
Syntax: Integer32
Automatically extracted from www.mibdepot.com
ltmTcpProfileInitRwnd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Initial receive window size for connections to this destination. The actual window size is this value multiplied by the MSS (Maximal Segment Size) of the connection. The default value is zero, meaning to use Slow Start value. Allowed values are in the range of 0 to 16." ::= { ltmTcpProfileEntry 42 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.1 | ltmTcpProfileName | 0 | 0 | The name of a TCP profile. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.2 | ltmTcpProfileConfigSource | 0 | 0 | The state that specifies whether this is a base/pre-configured profile or user defined profile. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.3 | ltmTcpProfileDefaultName | 0 | 0 | The name of the profile from which the specified profile derives its attribute default values. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.4 | ltmTcpProfileResetOnTimeout | 0 | 0 | The feature of reset for idle timeout. If true and a TCP connection exceeds its idle_timeout, send a reset in addition to deletin… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.5 | ltmTcpProfileTimeWaitRecycle | 0 | 0 | Recycle connection when SYN is received in TIME-WAIT state. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.6 | ltmTcpProfileDelayedAcks | 0 | 0 | If true, Enable delayed ACK to allow coalescing of multiple ACK responses. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.7 | ltmTcpProfileProxyMss | 0 | 0 | Whether or not to proxy maximum segment size. If true, advertise the same mss to the server as was negotiated with the client. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.8 | ltmTcpProfileProxyOptions | 0 | 0 | Whether or not to proxy an option. If true, advertise an option (e.g. time-stamps) to the server only if it was negotiated with t… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.9 | ltmTcpProfileProxyBufferLow | 0 | 0 | The proxy buffer level at which the receive window is opened. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.10 | ltmTcpProfileProxyBufferHigh | 0 | 0 | The proxy buffer level at which the receive window is closed. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.11 | ltmTcpProfileIdleTimeout | 0 | 0 | The number of seconds without traffic before a connection is eligible for deletion. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.12 | ltmTcpProfileTimeWaitTimeout | 0 | 0 | The milliseconds in TIME-WAIT before entering CLOSED state. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.13 | ltmTcpProfileFinWaitTimeout | 0 | 0 | The number of seconds to remain in FIN-WAIT or CLOSING state before giving up. Zero is forever (or until maxrtx of FIN). |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.14 | ltmTcpProfileCloseWaitTimeout | 0 | 0 | The number of seconds to remain in LAST-ACK state before giving up. Zero is forever (or until maxrtx of FIN). |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.15 | ltmTcpProfileSndbuf | 0 | 0 | Send buffer size in bytes. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.16 | ltmTcpProfileRcvwnd | 0 | 0 | Receive window size in bytes. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.17 | ltmTcpProfileKeepAliveInterval | 0 | 0 | Keep alive probe interval in milliseconds. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.18 | ltmTcpProfileSynMaxrtx | 0 | 0 | The maximum number of retransmissions of SYN segments. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.19 | ltmTcpProfileMaxrtx | 0 | 0 | The maximum number of retransmissions of data segments. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.20 | ltmTcpProfileIpTosToClient | 0 | 0 | The IP type of service set in packets sent to client. Default:None. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.21 | ltmTcpProfileLinkQosToClient | 0 | 0 | The link quality of service set in packets sent to client. Default:None. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.22 | ltmTcpProfileDeferredAccept | 0 | 0 | The state that if true, defers allocation of connection chain context until payload from client has been seen. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.23 | ltmTcpProfileSelectiveAcks | 0 | 0 | The state that if true, enable RFC2018 Selective Acknowledgements. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.24 | ltmTcpProfileEcn | 0 | 0 | The state that if true, enable RFC3168 Extended Congestion Notification (ECN). |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.25 | ltmTcpProfileLimitedTransmit | 0 | 0 | The state that if true, enables support for RFC3042 Limited Transmit Recovery |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.26 | ltmTcpProfileHighPerfTcpExt | 0 | 0 | ltmTcpProfileHighPerftcpExt |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.27 | ltmTcpProfileSlowStart | 0 | 0 | The state if true, enable TCP slow-start by default. We use RFC3390 to slow-start rather than traditional congestion avoidance m… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.28 | ltmTcpProfileBandwidthDelay | 0 | 0 | The state if true, attempt to calculate the optimal bandwidth to use to the peer based on throughput and round-trip time, and don… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.29 | ltmTcpProfileNagle | 0 | 0 | The state if true, delay sending data < MSS in size unless all prior data has been ACKed. This leads to less in-flight small-data, and less chance fo… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.30 | ltmTcpProfileAckOnPush | 0 | 0 | The state if true, data-bearing in-order TCP segments will elicit immediate ACKs from us if they have the PUSH flag set, regardl… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.31 | ltmTcpProfileMd5Sig | 0 | 0 | The state if true, use RFC2385 TCP-MD5 signatures to protect TCP traffic against intermediate tampering. |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.32 | ltmTcpProfileMd5SigPass | 0 | 0 | This is a plaintext passphrase which may be between 1 and 80 characters in length, and is used in a shared-secret scheme to imple… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.33 | ltmTcpProfileAbc | 0 | 0 | The state that if it is true, count the number of bytes acked rather than the number of returning ACKs from the peer when in the … |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.34 | ltmTcpProfileCongestionCtrl | 0 | 0 | The TCP congestion control mode, guiding cwnd growth. reno - RENO congestion control mode; newreno - new RENO congestion control … |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.35 | ltmTcpProfileDsack | 0 | 0 | The state that if true, enable support for RFC2883 D-SACK (Duplicate Selective Acknowledgement). |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.36 | ltmTcpProfileCmetricsCache | 0 | 0 | The state that if true, use the routing table metrics cache to retrieve the last-known tcp congestion parameters. (Congestion win… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.37 | ltmTcpProfileVerifiedAccept | 0 | 0 | The state that if true, the device must not respond to the clients SYN with a SYN-ACK until it receives a SYN-ACK from the server… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.38 | ltmTcpProfilePktLossIgnoreRate | 0 | 0 | Specifies the threshold of packets lost per million at which the system should perform congestion control. Measured in packets p… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.39 | ltmTcpProfilePktLossIgnoreBurst | 0 | 0 | Specifies the likelihood of performing congestion control when multiple packets in a row are lost even if the loss threshold has… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.40 | ltmTcpProfileZeroWindowTimeout | 0 | 0 | Specifies the timeout in milliseconds for terminating a connection with an effective zero length TCP transmit window. The timeou… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.41 | ltmTcpProfileInitCwnd | 0 | 0 | Initial congestion window size for connections to this destination. Actual window size is this value multiplied by the MSS (Maxi… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.43 | ltmTcpProfileDelayWindowControl | 0 | 0 | If enabled, uses an estimate of queueing delay as a measure of congestion to control, in addition to the normal loss based contr… |
| 1.3.6.1.4.1.3375.2.2.6.10.1.2.1.44 | ltmTcpProfileSynRtoBase | 0 | 0 | Initial RTO (Retransmission TimeOut) base multiplier for SYN retransmission, specified in milliseconds. This value is modified b… |