The value of this object is equal to the channel
percentage utilization setting for this end-point.
This is the expected long-term utilization of the
channel by this end-point.
Parsed from file STRATACOM-MIB.mib
Module: STRATACOM-MIB
Vendor: Stratacom
Module: STRATACOM-MIB
[Automatically extracted from oidview.com]
frEndptPercUtil OBJECT-TYPE SYNTAX INTEGER (0..100) ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is equal to the channel percentage utilization setting for this end-point. This is the expected long-term utilization of the channel by this end-point." ::= { frEndptEntry 28 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.100.4.3.5.1.1 | frEndptIndex | 0 | 0 | Index into table for this end-point. Although only 1024 endpoints may exist on a node, 2048 possible index values exist to supp… |
| 1.3.6.1.4.1.351.100.4.3.5.1.2 | frEndptDesc | 0 | 0 | String describing this end-point. Contains information about the domain, nodename, slot, port, and DLCI for the end-point. For… |
| 1.3.6.1.4.1.351.100.4.3.5.1.3 | frOtherEndptIndex | 0 | 0 | Index into remote node's frEndptTable for this PVC end-point. For DAX (intra-node) connections, this index is associated with th… |
| 1.3.6.1.4.1.351.100.4.3.5.1.4 | frOtherEndptDesc | 0 | 0 | String describing the remote end-point. Contains information about the domain, nodename, slot, port, and DLCI for the end-point… |
| 1.3.6.1.4.1.351.100.4.3.5.1.5 | frEndptAdminStatus | 0 | 0 | User requested state for end-point table row. A user can create this VC or delete this VC by setting this object appropriately. … |
| 1.3.6.1.4.1.351.100.4.3.5.1.6 | frEndptOperStatus | 0 | 0 | Actual state of the end-point. If the state is failed, then look to the objects frNoRouteFoundFailure, frBumpFailure, frEndPoint… |
| 1.3.6.1.4.1.351.100.4.3.5.1.7 | frNoRouteFoundFailure | 0 | 0 | End-point is failed is because no route to the remote end-point could be found. |
| 1.3.6.1.4.1.351.100.4.3.5.1.8 | frBumpFailure | 0 | 0 | End-point is failed because of insufficient bandwidth to route to the remote end-point. This may have also been caused because a… |
| 1.3.6.1.4.1.351.100.4.3.5.1.9 | frEndPointFailure | 0 | 0 | End-point is failed because of a remote end-point failure. The remote end-point is on a node that resides in another domain makin… |
| 1.3.6.1.4.1.351.100.4.3.5.1.10 | frTestFailure | 0 | 0 | End-point is failed because of the failure of a connection test. |
| 1.3.6.1.4.1.351.100.4.3.5.1.11 | frConnPtr | 0 | 0 | Pointer to general connection information. Using this pointer the user can obtain connection status, and routing information. Sp… |
| 1.3.6.1.4.1.351.100.4.3.5.1.12 | frNextPtr | 0 | 0 | Pointer to next end-point information. This allows logical sets of end-points to be linked up. For example, the end-points asso… |
| 1.3.6.1.4.1.351.100.4.3.5.1.13 | frNextOnPortPtr | 0 | 0 | Pointer to next end-point information for the port associated with this end-point. For example, using this pointer all frame rel… |
| 1.3.6.1.4.1.351.100.4.3.5.1.14 | frEndptConnDesc | 0 | 0 | A string that has been defined for the connection to give a more descriptive name. Connections can be given clear text names in … |
| 1.3.6.1.4.1.351.100.4.3.5.1.15 | frEndptTrkAvoidType | 0 | 0 | User selectable types of trunks to avoid for the transfer of FRP data. Current choices are to avoid satellite links, terrestrial… |
| 1.3.6.1.4.1.351.100.4.3.5.1.16 | frEndptTrkAvoidZCS | 0 | 0 | Flag to force the connection to avoid trunks with zero code suppression (ZCS). This object is optional during the creation of the… |
| 1.3.6.1.4.1.351.100.4.3.5.1.17 | frEndptSubType | 0 | 0 | Frame Relay endpoint subtype object. |
| 1.3.6.1.4.1.351.100.4.3.5.1.18 | frEndptBWClass | 0 | 0 | User selectable connection class which defines the operating parameters for the connection. Any or all of these parameters can b… |
| 1.3.6.1.4.1.351.100.4.3.5.1.19 | frEndptMIR | 0 | 0 | The minimum transmit bandwidth (MIR) parameter (in 100s of bits per second) for this end-point. During creation of an endpoint, … |
| 1.3.6.1.4.1.351.100.4.3.5.1.20 | frEndptCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in 100s of bits per second) for this end-po… |
| 1.3.6.1.4.1.351.100.4.3.5.1.21 | frEndptBc | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (in bytes) for this end-point. This parameter is ent… |
| 1.3.6.1.4.1.351.100.4.3.5.1.22 | frEndptBe | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (in bytes) for this end-point. This parameter is entere… |
| 1.3.6.1.4.1.351.100.4.3.5.1.23 | frEndptVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in bytes) for this end-point. This parameter is entered instead of the frEn… |
| 1.3.6.1.4.1.351.100.4.3.5.1.24 | frEndptPIR | 0 | 0 | The peak transmit bandwidth (PIR) parameter (in 100s of bits per second) for this end-point. This parameter is entered instead o… |
| 1.3.6.1.4.1.351.100.4.3.5.1.25 | frEndptCMAX | 0 | 0 | The maximum credits that can be accrued for this end-point. |
| 1.3.6.1.4.1.351.100.4.3.5.1.26 | frEndptEcnQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for this end-point's transmit queue. This value is sp… |
| 1.3.6.1.4.1.351.100.4.3.5.1.27 | frEndptQIR | 0 | 0 | The transmit quiescent information rate (QIR) parameter (in 100s of bits per second) for this end-point. This value can range be… |
| 1.3.6.1.4.1.351.100.4.3.5.1.29 | frEndptOeMIR | 0 | 0 | The minimum receive bandwidth (MIR) parameter (in 100s of bits per second) for the other end-point. This parameter is actually th… |
| 1.3.6.1.4.1.351.100.4.3.5.1.30 | frEndptOeCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in 100s of bits per second) for the other en… |
| 1.3.6.1.4.1.351.100.4.3.5.1.31 | frEndptOeBc | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (in bytes) for the end-point. This parameter is ent… |
| 1.3.6.1.4.1.351.100.4.3.5.1.32 | frEndptOeBe | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (in bytes) for the other end-point This parameter is en… |
| 1.3.6.1.4.1.351.100.4.3.5.1.33 | frEndptOeVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in bytes) for this end-point. This parameter is entered instead of the frEn… |
| 1.3.6.1.4.1.351.100.4.3.5.1.34 | frEndptOePIR | 0 | 0 | The peak receive bandwidth (PIR) parameter (in 100s of bits per second) for the other end-point This parameter is entered instead… |
| 1.3.6.1.4.1.351.100.4.3.5.1.35 | frEndptOeCMAX | 0 | 0 | The maximum credits that can be accrued for the other end-point. This parameter is actually the frEndptCMAX parameter for the rem… |
| 1.3.6.1.4.1.351.100.4.3.5.1.36 | frEndptOeEcnQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for the other end-point's receive queue. This value is… |
| 1.3.6.1.4.1.351.100.4.3.5.1.37 | frEndptOeQIR | 0 | 0 | The receive quiescent information rate (QIR) parameter (in 100s of bits per second) for the other end-point. This value can range… |
| 1.3.6.1.4.1.351.100.4.3.5.1.38 | frEndptOePercUtil | 0 | 0 | The value of this object is equal to the channel percentage utilization setting for the other end-point. This is the expected lon… |
| 1.3.6.1.4.1.351.100.4.3.5.1.39 | frEndptEnableFST | 0 | 0 | The value of this object determines whether or not the ForeSight option is being used for this . If set to false, then ForeSight… |
| 1.3.6.1.4.1.351.100.4.3.5.1.40 | frEndptConnPrio | 0 | 0 | The value of this object determines the priority that is given to the data carried by this . If set to low, then the data is giv… |
| 1.3.6.1.4.1.351.100.4.3.5.1.41 | frEndptGroupFlag | 0 | 0 | Specifies whether this is a grouped connection. Note that MIB object connGroupFlag provides grouping information about all the co… |
| 1.3.6.1.4.1.351.100.4.3.5.1.42 | frEndptLocLpbkState | 0 | 0 | Specifies the Local Loopback State the user would like to set for the endpoint. |
| 1.3.6.1.4.1.351.100.4.3.5.1.43 | frEndptLocRmtLpbkState | 0 | 0 | Specifies the Local-Remote Loopback State the user would like to set for the endpoint. |
| 1.3.6.1.4.1.351.100.4.3.5.1.44 | frEndptLpbkStatus | 0 | 0 | Specifies the current Loopback State of the endpoint. The value returned from this object is a bitmap of the current loopback sta… |
| 1.3.6.1.4.1.351.100.4.3.5.1.45 | frEndptTestType | 0 | 0 | Specifies the type of test the user would like to conduct on this endpoint. There are currently two types of tests. Test will e… |
| 1.3.6.1.4.1.351.100.4.3.5.1.46 | frEndptRtdTestDelay | 0 | 0 | The value of this object is the calculated round trip delay (measured in milliseconds) of this Frame Relay endpoint. A delay test… |
| 1.3.6.1.4.1.351.100.4.3.5.1.47 | frEndptGroupDesc | 0 | 0 | String describing the group this endpoint is associated with. The format of the group text description is domain.node.grp-number… |