Specifies whether this is a grouped connection. Note
that MIB object connGroupFlag provides grouping
information about all the connections using that
connTable entry whereas this object provides same
information for this end point.
Parsed from file STRATACOM-MIB.mib
Module: STRATACOM-MIB
Vendor: Stratacom
Module: STRATACOM-MIB
[Automatically extracted from oidview.com]
frEndptGroupFlag OBJECT-TYPE SYNTAX INTEGER { false(1), true(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies whether this is a grouped connection. Note that MIB object connGroupFlag provides grouping information about all the connections using that connTable entry whereas this object provides same information for this end point." ::= { frEndptEntry 41 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.100.4.3.5.1.1 | frEndptIndex | 0 | 0 | Index into table for this end-point. Although only 1024 endpoints may exist on a node, 2048 possible index values exist to supp… |
| 1.3.6.1.4.1.351.100.4.3.5.1.2 | frEndptDesc | 0 | 0 | String describing this end-point. Contains information about the domain, nodename, slot, port, and DLCI for the end-point. For… |
| 1.3.6.1.4.1.351.100.4.3.5.1.3 | frOtherEndptIndex | 0 | 0 | Index into remote node's frEndptTable for this PVC end-point. For DAX (intra-node) connections, this index is associated with th… |
| 1.3.6.1.4.1.351.100.4.3.5.1.4 | frOtherEndptDesc | 0 | 0 | String describing the remote end-point. Contains information about the domain, nodename, slot, port, and DLCI for the end-point… |
| 1.3.6.1.4.1.351.100.4.3.5.1.5 | frEndptAdminStatus | 0 | 0 | User requested state for end-point table row. A user can create this VC or delete this VC by setting this object appropriately. … |
| 1.3.6.1.4.1.351.100.4.3.5.1.6 | frEndptOperStatus | 0 | 0 | Actual state of the end-point. If the state is failed, then look to the objects frNoRouteFoundFailure, frBumpFailure, frEndPoint… |
| 1.3.6.1.4.1.351.100.4.3.5.1.7 | frNoRouteFoundFailure | 0 | 0 | End-point is failed is because no route to the remote end-point could be found. |
| 1.3.6.1.4.1.351.100.4.3.5.1.8 | frBumpFailure | 0 | 0 | End-point is failed because of insufficient bandwidth to route to the remote end-point. This may have also been caused because a… |
| 1.3.6.1.4.1.351.100.4.3.5.1.9 | frEndPointFailure | 0 | 0 | End-point is failed because of a remote end-point failure. The remote end-point is on a node that resides in another domain makin… |
| 1.3.6.1.4.1.351.100.4.3.5.1.10 | frTestFailure | 0 | 0 | End-point is failed because of the failure of a connection test. |
| 1.3.6.1.4.1.351.100.4.3.5.1.11 | frConnPtr | 0 | 0 | Pointer to general connection information. Using this pointer the user can obtain connection status, and routing information. Sp… |
| 1.3.6.1.4.1.351.100.4.3.5.1.12 | frNextPtr | 0 | 0 | Pointer to next end-point information. This allows logical sets of end-points to be linked up. For example, the end-points asso… |
| 1.3.6.1.4.1.351.100.4.3.5.1.13 | frNextOnPortPtr | 0 | 0 | Pointer to next end-point information for the port associated with this end-point. For example, using this pointer all frame rel… |
| 1.3.6.1.4.1.351.100.4.3.5.1.14 | frEndptConnDesc | 0 | 0 | A string that has been defined for the connection to give a more descriptive name. Connections can be given clear text names in … |
| 1.3.6.1.4.1.351.100.4.3.5.1.15 | frEndptTrkAvoidType | 0 | 0 | User selectable types of trunks to avoid for the transfer of FRP data. Current choices are to avoid satellite links, terrestrial… |
| 1.3.6.1.4.1.351.100.4.3.5.1.16 | frEndptTrkAvoidZCS | 0 | 0 | Flag to force the connection to avoid trunks with zero code suppression (ZCS). This object is optional during the creation of the… |
| 1.3.6.1.4.1.351.100.4.3.5.1.17 | frEndptSubType | 0 | 0 | Frame Relay endpoint subtype object. |
| 1.3.6.1.4.1.351.100.4.3.5.1.18 | frEndptBWClass | 0 | 0 | User selectable connection class which defines the operating parameters for the connection. Any or all of these parameters can b… |
| 1.3.6.1.4.1.351.100.4.3.5.1.19 | frEndptMIR | 0 | 0 | The minimum transmit bandwidth (MIR) parameter (in 100s of bits per second) for this end-point. During creation of an endpoint, … |
| 1.3.6.1.4.1.351.100.4.3.5.1.20 | frEndptCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in 100s of bits per second) for this end-po… |
| 1.3.6.1.4.1.351.100.4.3.5.1.21 | frEndptBc | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (in bytes) for this end-point. This parameter is ent… |
| 1.3.6.1.4.1.351.100.4.3.5.1.22 | frEndptBe | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (in bytes) for this end-point. This parameter is entere… |
| 1.3.6.1.4.1.351.100.4.3.5.1.23 | frEndptVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in bytes) for this end-point. This parameter is entered instead of the frEn… |
| 1.3.6.1.4.1.351.100.4.3.5.1.24 | frEndptPIR | 0 | 0 | The peak transmit bandwidth (PIR) parameter (in 100s of bits per second) for this end-point. This parameter is entered instead o… |
| 1.3.6.1.4.1.351.100.4.3.5.1.25 | frEndptCMAX | 0 | 0 | The maximum credits that can be accrued for this end-point. |
| 1.3.6.1.4.1.351.100.4.3.5.1.26 | frEndptEcnQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for this end-point's transmit queue. This value is sp… |
| 1.3.6.1.4.1.351.100.4.3.5.1.27 | frEndptQIR | 0 | 0 | The transmit quiescent information rate (QIR) parameter (in 100s of bits per second) for this end-point. This value can range be… |
| 1.3.6.1.4.1.351.100.4.3.5.1.28 | frEndptPercUtil | 0 | 0 | The value of this object is equal to the channel percentage utilization setting for this end-point. This is the expected long-te… |
| 1.3.6.1.4.1.351.100.4.3.5.1.29 | frEndptOeMIR | 0 | 0 | The minimum receive bandwidth (MIR) parameter (in 100s of bits per second) for the other end-point. This parameter is actually th… |
| 1.3.6.1.4.1.351.100.4.3.5.1.30 | frEndptOeCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in 100s of bits per second) for the other en… |
| 1.3.6.1.4.1.351.100.4.3.5.1.31 | frEndptOeBc | 0 | 0 | The value of this object is equal to the committed burst size (Bc) parameter (in bytes) for the end-point. This parameter is ent… |
| 1.3.6.1.4.1.351.100.4.3.5.1.32 | frEndptOeBe | 0 | 0 | The value of this object is equal to the excess burst size (Be) parameter (in bytes) for the other end-point This parameter is en… |
| 1.3.6.1.4.1.351.100.4.3.5.1.33 | frEndptOeVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in bytes) for this end-point. This parameter is entered instead of the frEn… |
| 1.3.6.1.4.1.351.100.4.3.5.1.34 | frEndptOePIR | 0 | 0 | The peak receive bandwidth (PIR) parameter (in 100s of bits per second) for the other end-point This parameter is entered instead… |
| 1.3.6.1.4.1.351.100.4.3.5.1.35 | frEndptOeCMAX | 0 | 0 | The maximum credits that can be accrued for the other end-point. This parameter is actually the frEndptCMAX parameter for the rem… |
| 1.3.6.1.4.1.351.100.4.3.5.1.36 | frEndptOeEcnQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for the other end-point's receive queue. This value is… |
| 1.3.6.1.4.1.351.100.4.3.5.1.37 | frEndptOeQIR | 0 | 0 | The receive quiescent information rate (QIR) parameter (in 100s of bits per second) for the other end-point. This value can range… |
| 1.3.6.1.4.1.351.100.4.3.5.1.38 | frEndptOePercUtil | 0 | 0 | The value of this object is equal to the channel percentage utilization setting for the other end-point. This is the expected lon… |
| 1.3.6.1.4.1.351.100.4.3.5.1.39 | frEndptEnableFST | 0 | 0 | The value of this object determines whether or not the ForeSight option is being used for this . If set to false, then ForeSight… |
| 1.3.6.1.4.1.351.100.4.3.5.1.40 | frEndptConnPrio | 0 | 0 | The value of this object determines the priority that is given to the data carried by this . If set to low, then the data is giv… |
| 1.3.6.1.4.1.351.100.4.3.5.1.42 | frEndptLocLpbkState | 0 | 0 | Specifies the Local Loopback State the user would like to set for the endpoint. |
| 1.3.6.1.4.1.351.100.4.3.5.1.43 | frEndptLocRmtLpbkState | 0 | 0 | Specifies the Local-Remote Loopback State the user would like to set for the endpoint. |
| 1.3.6.1.4.1.351.100.4.3.5.1.44 | frEndptLpbkStatus | 0 | 0 | Specifies the current Loopback State of the endpoint. The value returned from this object is a bitmap of the current loopback sta… |
| 1.3.6.1.4.1.351.100.4.3.5.1.45 | frEndptTestType | 0 | 0 | Specifies the type of test the user would like to conduct on this endpoint. There are currently two types of tests. Test will e… |
| 1.3.6.1.4.1.351.100.4.3.5.1.46 | frEndptRtdTestDelay | 0 | 0 | The value of this object is the calculated round trip delay (measured in milliseconds) of this Frame Relay endpoint. A delay test… |
| 1.3.6.1.4.1.351.100.4.3.5.1.47 | frEndptGroupDesc | 0 | 0 | String describing the group this endpoint is associated with. The format of the group text description is domain.node.grp-number… |