An entry in the ATM End-point table.
Parsed from file STRATACOM-MIB.mib
Module: STRATACOM-MIB
Vendor: Stratacom
Module: STRATACOM-MIB
[Automatically extracted from oidview.com]
atmEndptEntry OBJECT-TYPE SYNTAX AtmEndptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the ATM End-point table." INDEX { atmEndptIndex } ::= { atmEndptTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.100.4.3.8.1.1 | atmEndptIndex | 0 | 0 | Index into table for this end-point. Although only 5000 endpoints may exist on a node, 10000 possible index values exist to sup… |
1.3.6.1.4.1.351.100.4.3.8.1.2 | atmEndptDesc | 0 | 0 | String describing this end-point. Contains information about the domain, nodename, slot, port, vpi, and vci for the end-point. … |
1.3.6.1.4.1.351.100.4.3.8.1.3 | atmOtherEndptIndex | 0 | 0 | Index into remote node's atmEndptTable for this end-point. For DAX (intra-node) connections, this index is associated with the l… |
1.3.6.1.4.1.351.100.4.3.8.1.4 | atmOtherEndptDesc | 0 | 0 | String describing the remote PVC end-point. Contains information about the domain, nodename, slot, port, vpi, and vci for the en… |
1.3.6.1.4.1.351.100.4.3.8.1.5 | atmEndptAdminStatus | 0 | 0 | User requested state for end-point table row. A user can create this VC or delete this VC by setting this object appropriately. … |
1.3.6.1.4.1.351.100.4.3.8.1.6 | atmEndptOperStatus | 0 | 0 | Actual state of the end-point. If the state is failed, then look to the objects atmNoRouteFoundFailure, atmBumpFailure, atmEndPo… |
1.3.6.1.4.1.351.100.4.3.8.1.7 | atmNoRouteFoundFailure | 0 | 0 | End-point is failed is because no route to the remote end-point could be found. |
1.3.6.1.4.1.351.100.4.3.8.1.8 | atmBumpFailure | 0 | 0 | End-point is failed because of insufficient bandwidth to route to the remote end-point. This may have also been caused because a… |
1.3.6.1.4.1.351.100.4.3.8.1.9 | atmEndPointFailure | 0 | 0 | End-point is failed because of a remote end-point failure. The remote end-point is on a node that resides in another domain makin… |
1.3.6.1.4.1.351.100.4.3.8.1.10 | atmTestFailure | 0 | 0 | End-point is failed because of the failure of a connection test. |
1.3.6.1.4.1.351.100.4.3.8.1.11 | atmConnPtr | 0 | 0 | Pointer to general connection information. Using this pointer the user can obtain connection status, and routing information. Sp… |
1.3.6.1.4.1.351.100.4.3.8.1.12 | atmNextPtr | 0 | 0 | Pointer to next end-point information. This allows logical sets of end-points to be linked up. For example, the end-points asso… |
1.3.6.1.4.1.351.100.4.3.8.1.13 | atmNextOnPortPtr | 0 | 0 | Pointer to next end-point information for the port associated with this end-point. For example, using this pointer all atm end-p… |
1.3.6.1.4.1.351.100.4.3.8.1.14 | atmEndptConnDesc | 0 | 0 | A string that has been defined for the connection to give a more descriptive name. Connections can be given clear text names in … |
1.3.6.1.4.1.351.100.4.3.8.1.15 | atmEndptTrkAvoidType | 0 | 0 | User selectable types of trunks to avoid for the transfer of ATM data. Current choices are to avoid satellite links, terrestrial… |
1.3.6.1.4.1.351.100.4.3.8.1.16 | atmEndptTrkAvoidZCS | 0 | 0 | Flag to force the connection to avoid trunks with zero code suppression (ZCS). This object is optional during the creation of an … |
1.3.6.1.4.1.351.100.4.3.8.1.17 | atmEndptSubType | 0 | 0 | ATM endpoint subtype object. atf - Interworking conn (without Foresight) vbr - Variable Bit Rate Conn (No ForeSight) cbr - C… |
1.3.6.1.4.1.351.100.4.3.8.1.18 | atmEndptBWClass | 0 | 0 | User selectable connection class which defines the operating parameters for the connection. Any or all of these parameters can b… |
1.3.6.1.4.1.351.100.4.3.8.1.19 | atmEndptMIR | 0 | 0 | The minimum transmit bandwidth (MIR) parameter (in cells per second) for this end-point. The maximum value for this object is the… |
1.3.6.1.4.1.351.100.4.3.8.1.20 | atmEndptCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in cells per second) for this end-point. For … |
1.3.6.1.4.1.351.100.4.3.8.1.21 | atmEndptVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in cells) for this end-point. This object does not apply to vbr or cbr conne… |
1.3.6.1.4.1.351.100.4.3.8.1.22 | atmEndptPIR | 0 | 0 | The peak transmit bandwidth (PIR) parameter (in cells per second) for this end-point. The maximum value for this object is the por… |
1.3.6.1.4.1.351.100.4.3.8.1.23 | atmEndptEfciQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for this end-point's transmit queue. This value is a p… |
1.3.6.1.4.1.351.100.4.3.8.1.24 | atmEndptQIR | 0 | 0 | The transmit quiescent information rate (QIR) parameter (in cells per second) for this end-point. This value can range between th… |
1.3.6.1.4.1.351.100.4.3.8.1.25 | atmEndptPercUtil | 0 | 0 | The value of this object is equal to the channel percentage utilization setting for this end-point. This is the expected long-ter… |
1.3.6.1.4.1.351.100.4.3.8.1.26 | atmEndptCBS | 0 | 0 | The value of this object is equal to the Compliant Burst Size in cells for this end-point. The maximum value for this object on O… |
1.3.6.1.4.1.351.100.4.3.8.1.27 | atmEndptIBS | 0 | 0 | The value of this object is equal to the Initial Burst Size in cells for this end-point. The maximum value for this object on OC3… |
1.3.6.1.4.1.351.100.4.3.8.1.28 | atmEndptMFS | 0 | 0 | This object is not used by the new UPC algorithm, and its value is meaningless. Any attempt to write to this object will fail. |
1.3.6.1.4.1.351.100.4.3.8.1.29 | atmEndptCCDV | 0 | 0 | The value of this object is equal to the Compliant Cell Delay Variation for this end-point. It corresponds to the CDVT(0+1) param… |
1.3.6.1.4.1.351.100.4.3.8.1.30 | atmEndptHiCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging activation threshold for this end-point. This object on… |
1.3.6.1.4.1.351.100.4.3.8.1.31 | atmEndptLoCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging deactivation threshold for this end-point. This object … |
1.3.6.1.4.1.351.100.4.3.8.1.32 | atmEndptOeMIR | 0 | 0 | The minimum receive bandwidth (MIR) parameter (in cells per second) for the other end-point. The maximum value for this object is… |
1.3.6.1.4.1.351.100.4.3.8.1.33 | atmEndptOeCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in cells per second) for the other end-point… |
1.3.6.1.4.1.351.100.4.3.8.1.34 | atmEndptOeVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in cells) for the other end-point. This object does not apply to vbr or cbr … |
1.3.6.1.4.1.351.100.4.3.8.1.35 | atmEndptOePIR | 0 | 0 | The peak receive bandwidth (PIR) parameter (in cells per second) for the other end-point. The maximum value for this object is th… |
1.3.6.1.4.1.351.100.4.3.8.1.36 | atmEndptOeEfciQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for the other end-point's transmit queue. This object … |
1.3.6.1.4.1.351.100.4.3.8.1.37 | atmEndptOeQIR | 0 | 0 | The transmit quiescent information rate (QIR) parameter (in cells bits per second) for the other end-point. This value can range … |
1.3.6.1.4.1.351.100.4.3.8.1.38 | atmEndptOePercUtil | 0 | 0 | The value of this object is equal to the channel percentage utilization setting for the other end-point. This is the expected lon… |
1.3.6.1.4.1.351.100.4.3.8.1.39 | atmEndptOeCBS | 0 | 0 | The value of this object is equal to the Compliant Burst Size in cells for the other end-point. The maximum value for this object… |
1.3.6.1.4.1.351.100.4.3.8.1.40 | atmEndptOeIBS | 0 | 0 | The value of this object is equal to the Initial Burst Size in cells for the other end-point. The maximum value for this object o… |
1.3.6.1.4.1.351.100.4.3.8.1.41 | atmEndptOeMFS | 0 | 0 | This object is not used by the new UPC algorithm, and its value is meaningless. Any attempt to write to this object will fail. |
1.3.6.1.4.1.351.100.4.3.8.1.42 | atmEndptOeCCDV | 0 | 0 | The value of this object is equal to the Compliant Cell Delay Variation for this end-point. It corresponds to the CDVT(0+1) param… |
1.3.6.1.4.1.351.100.4.3.8.1.43 | atmEndptOeHiCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging activation threshold for the other end-point. This obje… |
1.3.6.1.4.1.351.100.4.3.8.1.44 | atmEndptOeLoCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging deactivation threshold for the other end-point. This ob… |
1.3.6.1.4.1.351.100.4.3.8.1.45 | atmEndptCLPTagging | 0 | 0 | The value of this object enables the CLP (Cell Loss Priority) tagging for handling non-compliant cells. When enabled the CLP bit … |
1.3.6.1.4.1.351.100.4.3.8.1.46 | atmEndptUPC | 0 | 0 | The value of this object enables the UPC algorithm. |
1.3.6.1.4.1.351.100.4.3.8.1.47 | atmEndptEnableFST | 0 | 0 | The value of this object determines whether or not the ForeSight option is being used for this . If set to false, then ForeSight… |
1.3.6.1.4.1.351.100.4.3.8.1.48 | atmEndptRateUpICA | 0 | 0 | The value of this object is equal to the ForeSight Rate Up value in cells per second per adjust for this end point. |
1.3.6.1.4.1.351.100.4.3.8.1.49 | atmEndptRateDnICA | 0 | 0 | The value of this object is equal to the ForeSight Rate Down value expressed as percentage of MCR. |
1.3.6.1.4.1.351.100.4.3.8.1.50 | atmEndptFastDnICA | 0 | 0 | The value of this object is equal to the ForeSight Fast Down value expressed as percentage of MCR. |
1.3.6.1.4.1.351.100.4.3.8.1.51 | atmEndptToQIR | 0 | 0 | The value of this object is equal to the QIR timeout value. This object corresponds to the Initial Cell Rate (ICR) timeout. |
1.3.6.1.4.1.351.100.4.3.8.1.52 | atmEndptMinAdjustICA | 0 | 0 | The value of this object is equal to the ForeSight minimum adjustment period. |
1.3.6.1.4.1.351.100.4.3.8.1.53 | atmEndptGroupFlag | 0 | 0 | Specifies whether this is a grouped connection. Note that MIB object connGroupFlag provides grouping information about all the co… |
1.3.6.1.4.1.351.100.4.3.8.1.54 | atmEndptOamStatus | 0 | 0 | The end to end OAM state. |
1.3.6.1.4.1.351.100.4.3.8.1.55 | atmEndptBCM | 0 | 0 | The value of this object enables the generation of RM cells when congestion is detected in this connection. |
1.3.6.1.4.1.351.100.4.3.8.1.56 | atmEndptFGCRA | 0 | 0 | The value of this object enables FGCRA. FGCRA (Frame-based Generic Rate Control Algorithm) is applicable with AAL-5 traffic only.… |
1.3.6.1.4.1.351.100.4.3.8.1.57 | atmEndptLocLpbkState | 0 | 0 | Specifies the Local Loopback State the user would like to set for the endpoint. |
1.3.6.1.4.1.351.100.4.3.8.1.58 | atmEndptLpbkStatus | 0 | 0 | Specifies the current Loopback State of the endpoint. The value returned from this object is a bitmap of the current loopback sta… |
1.3.6.1.4.1.351.100.4.3.8.1.59 | atmEndptTestType | 0 | 0 | Specifies the type of test the user would like to conduct on this endpoint. Only testDelay is currently defined. TestDelay calcu… |
1.3.6.1.4.1.351.100.4.3.8.1.60 | atmEndptRtdTestDelay | 0 | 0 | The value of this object is the calculated round trip delay (measured in milliseconds) for an OAM cell that is sent across the ne… |
1.3.6.1.4.1.351.100.4.3.8.1.61 | atmEndptOeBCM | 0 | 0 | The value of this object enables the generation of RM cells when congestion is detected in this connection. This is the other end… |
1.3.6.1.4.1.351.100.4.3.8.1.62 | atmEndptOeFGCRA | 0 | 0 | The value of this object enables FGCRA. FGCRA (Frame-based Generic Rate Control Algorithm) is applicable with AAL-5 traffic only.… |
1.3.6.1.4.1.351.100.4.3.8.1.63 | atmEndptGroupDesc | 0 | 0 | String describing the group this endpoint is associated with. The format of the group text description is domain.node.grp-number… |
1.3.6.1.4.1.351.100.4.3.8.1.64 | atmEndptLocRmtLpbkState | 0 | 0 | Specifies the Local-Remote Loopback State the user would like to set for the endpoint. |
1.3.6.1.4.1.351.100.4.3.8.1.65 | atmEndptScrPlc | 0 | 0 | Specifies the traffic policing for this end point This object can be set only if atmEndptUPC is enabled. |
1.3.6.1.4.1.351.100.4.3.8.1.66 | atmEndptOeScrPlc | 0 | 0 | Specifies the traffic policing for the other end point. This object can be set only if atmEndptUPC is enabled. |
1.3.6.1.4.1.351.100.4.3.8.1.67 | atmEndptPCR0 | 0 | 0 | The peak cell rate (in cells per second) for the second bucket for this end point. This object corresponds to the parameter PCR(0… |
1.3.6.1.4.1.351.100.4.3.8.1.68 | atmEndptOePCR0 | 0 | 0 | The peak cell rate (in cells per second) for the second bucket for the other end point. This object corresponds to the parameter … |
1.3.6.1.4.1.351.100.4.3.8.1.69 | atmEndptCDVT0 | 0 | 0 | The cell delay variation tolerance for the second bucket for this end point. This object corresponds to the parameter CDVT(0) in … |
1.3.6.1.4.1.351.100.4.3.8.1.70 | atmEndptOeCDVT0 | 0 | 0 | The cell delay variation tolerance for the second bucket for the other end point. This object corresponds to the parameter CDVT(0… |
1.3.6.1.4.1.351.100.4.3.8.1.71 | atmEndptOeRateUpICA | 0 | 0 | The value of this object is equal to the ForeSight Rate Up value in cells per second per adjust for the other end point. |
1.3.6.1.4.1.351.100.4.3.8.1.72 | atmEndptFRTT | 0 | 0 | The Fixed Round-Trip Time (FRTT) is the sum of the fixed and propagation delays from the source to a destination and back. . Units… |
1.3.6.1.4.1.351.100.4.3.8.1.73 | atmEndptTBE | 0 | 0 | Transient Buffer Exposure (TBE) is the negotiated number of cells that the network would like to limit the source to sending duri… |
1.3.6.1.4.1.351.100.4.3.8.1.74 | atmEndptVSVD | 0 | 0 | Virtual Source/Virtual Destination (VS/VD) is used to divide an ABR connection into two or more separately controlled ABR segment… |
1.3.6.1.4.1.351.100.4.3.8.1.75 | atmEndptPolicing | 0 | 0 | Specifies the traffic policing for this end point. Policing Type 1st Bucket 2nd Bucket vbr.1 CLP(0+1) CLP(0+1) vbr.2… |
1.3.6.1.4.1.351.100.4.3.8.1.76 | atmEndptPCR | 0 | 0 | PCR(0+1), Peak Cell Rate, specifies an upper bound on rate at which traffic can be submitted on an ATM connection. This object ap… |