The cell delay variation tolerance for the second
bucket for this end point. This object corresponds
to the parameter CDVT(0) in standard ATM documents,
and applies only to CBR connections. This object
can be set only if atmEndptUPC is enabled.
Parsed from file STRATACOM-MIB.mib
Module: STRATACOM-MIB
Vendor: Stratacom
Module: STRATACOM-MIB
[Automatically extracted from oidview.com]
atmEndptCDVT0 OBJECT-TYPE SYNTAX INTEGER (1..250000) ACCESS read-write STATUS mandatory DESCRIPTION "The cell delay variation tolerance for the second bucket for this end point. This object corresponds to the parameter CDVT(0) in standard ATM documents, and applies only to CBR connections. This object can be set only if atmEndptUPC is enabled." ::= { atmEndptEntry 69 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.100.4.3.8.1.1 | atmEndptIndex | 0 | 0 | Index into table for this end-point. Although only 5000 endpoints may exist on a node, 10000 possible index values exist to sup… |
1.3.6.1.4.1.351.100.4.3.8.1.2 | atmEndptDesc | 0 | 0 | String describing this end-point. Contains information about the domain, nodename, slot, port, vpi, and vci for the end-point. … |
1.3.6.1.4.1.351.100.4.3.8.1.3 | atmOtherEndptIndex | 0 | 0 | Index into remote node's atmEndptTable for this end-point. For DAX (intra-node) connections, this index is associated with the l… |
1.3.6.1.4.1.351.100.4.3.8.1.4 | atmOtherEndptDesc | 0 | 0 | String describing the remote PVC end-point. Contains information about the domain, nodename, slot, port, vpi, and vci for the en… |
1.3.6.1.4.1.351.100.4.3.8.1.5 | atmEndptAdminStatus | 0 | 0 | User requested state for end-point table row. A user can create this VC or delete this VC by setting this object appropriately. … |
1.3.6.1.4.1.351.100.4.3.8.1.6 | atmEndptOperStatus | 0 | 0 | Actual state of the end-point. If the state is failed, then look to the objects atmNoRouteFoundFailure, atmBumpFailure, atmEndPo… |
1.3.6.1.4.1.351.100.4.3.8.1.7 | atmNoRouteFoundFailure | 0 | 0 | End-point is failed is because no route to the remote end-point could be found. |
1.3.6.1.4.1.351.100.4.3.8.1.8 | atmBumpFailure | 0 | 0 | End-point is failed because of insufficient bandwidth to route to the remote end-point. This may have also been caused because a… |
1.3.6.1.4.1.351.100.4.3.8.1.9 | atmEndPointFailure | 0 | 0 | End-point is failed because of a remote end-point failure. The remote end-point is on a node that resides in another domain makin… |
1.3.6.1.4.1.351.100.4.3.8.1.10 | atmTestFailure | 0 | 0 | End-point is failed because of the failure of a connection test. |
1.3.6.1.4.1.351.100.4.3.8.1.11 | atmConnPtr | 0 | 0 | Pointer to general connection information. Using this pointer the user can obtain connection status, and routing information. Sp… |
1.3.6.1.4.1.351.100.4.3.8.1.12 | atmNextPtr | 0 | 0 | Pointer to next end-point information. This allows logical sets of end-points to be linked up. For example, the end-points asso… |
1.3.6.1.4.1.351.100.4.3.8.1.13 | atmNextOnPortPtr | 0 | 0 | Pointer to next end-point information for the port associated with this end-point. For example, using this pointer all atm end-p… |
1.3.6.1.4.1.351.100.4.3.8.1.14 | atmEndptConnDesc | 0 | 0 | A string that has been defined for the connection to give a more descriptive name. Connections can be given clear text names in … |
1.3.6.1.4.1.351.100.4.3.8.1.15 | atmEndptTrkAvoidType | 0 | 0 | User selectable types of trunks to avoid for the transfer of ATM data. Current choices are to avoid satellite links, terrestrial… |
1.3.6.1.4.1.351.100.4.3.8.1.16 | atmEndptTrkAvoidZCS | 0 | 0 | Flag to force the connection to avoid trunks with zero code suppression (ZCS). This object is optional during the creation of an … |
1.3.6.1.4.1.351.100.4.3.8.1.17 | atmEndptSubType | 0 | 0 | ATM endpoint subtype object. atf - Interworking conn (without Foresight) vbr - Variable Bit Rate Conn (No ForeSight) cbr - C… |
1.3.6.1.4.1.351.100.4.3.8.1.18 | atmEndptBWClass | 0 | 0 | User selectable connection class which defines the operating parameters for the connection. Any or all of these parameters can b… |
1.3.6.1.4.1.351.100.4.3.8.1.19 | atmEndptMIR | 0 | 0 | The minimum transmit bandwidth (MIR) parameter (in cells per second) for this end-point. The maximum value for this object is the… |
1.3.6.1.4.1.351.100.4.3.8.1.20 | atmEndptCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in cells per second) for this end-point. For … |
1.3.6.1.4.1.351.100.4.3.8.1.21 | atmEndptVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in cells) for this end-point. This object does not apply to vbr or cbr conne… |
1.3.6.1.4.1.351.100.4.3.8.1.22 | atmEndptPIR | 0 | 0 | The peak transmit bandwidth (PIR) parameter (in cells per second) for this end-point. The maximum value for this object is the por… |
1.3.6.1.4.1.351.100.4.3.8.1.23 | atmEndptEfciQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for this end-point's transmit queue. This value is a p… |
1.3.6.1.4.1.351.100.4.3.8.1.24 | atmEndptQIR | 0 | 0 | The transmit quiescent information rate (QIR) parameter (in cells per second) for this end-point. This value can range between th… |
1.3.6.1.4.1.351.100.4.3.8.1.25 | atmEndptPercUtil | 0 | 0 | The value of this object is equal to the channel percentage utilization setting for this end-point. This is the expected long-ter… |
1.3.6.1.4.1.351.100.4.3.8.1.26 | atmEndptCBS | 0 | 0 | The value of this object is equal to the Compliant Burst Size in cells for this end-point. The maximum value for this object on O… |
1.3.6.1.4.1.351.100.4.3.8.1.27 | atmEndptIBS | 0 | 0 | The value of this object is equal to the Initial Burst Size in cells for this end-point. The maximum value for this object on OC3… |
1.3.6.1.4.1.351.100.4.3.8.1.28 | atmEndptMFS | 0 | 0 | This object is not used by the new UPC algorithm, and its value is meaningless. Any attempt to write to this object will fail. |
1.3.6.1.4.1.351.100.4.3.8.1.29 | atmEndptCCDV | 0 | 0 | The value of this object is equal to the Compliant Cell Delay Variation for this end-point. It corresponds to the CDVT(0+1) param… |
1.3.6.1.4.1.351.100.4.3.8.1.30 | atmEndptHiCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging activation threshold for this end-point. This object on… |
1.3.6.1.4.1.351.100.4.3.8.1.31 | atmEndptLoCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging deactivation threshold for this end-point. This object … |
1.3.6.1.4.1.351.100.4.3.8.1.32 | atmEndptOeMIR | 0 | 0 | The minimum receive bandwidth (MIR) parameter (in cells per second) for the other end-point. The maximum value for this object is… |
1.3.6.1.4.1.351.100.4.3.8.1.33 | atmEndptOeCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in cells per second) for the other end-point… |
1.3.6.1.4.1.351.100.4.3.8.1.34 | atmEndptOeVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in cells) for the other end-point. This object does not apply to vbr or cbr … |
1.3.6.1.4.1.351.100.4.3.8.1.35 | atmEndptOePIR | 0 | 0 | The peak receive bandwidth (PIR) parameter (in cells per second) for the other end-point. The maximum value for this object is th… |
1.3.6.1.4.1.351.100.4.3.8.1.36 | atmEndptOeEfciQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for the other end-point's transmit queue. This object … |
1.3.6.1.4.1.351.100.4.3.8.1.37 | atmEndptOeQIR | 0 | 0 | The transmit quiescent information rate (QIR) parameter (in cells bits per second) for the other end-point. This value can range … |
1.3.6.1.4.1.351.100.4.3.8.1.38 | atmEndptOePercUtil | 0 | 0 | The value of this object is equal to the channel percentage utilization setting for the other end-point. This is the expected lon… |
1.3.6.1.4.1.351.100.4.3.8.1.39 | atmEndptOeCBS | 0 | 0 | The value of this object is equal to the Compliant Burst Size in cells for the other end-point. The maximum value for this object… |
1.3.6.1.4.1.351.100.4.3.8.1.40 | atmEndptOeIBS | 0 | 0 | The value of this object is equal to the Initial Burst Size in cells for the other end-point. The maximum value for this object o… |
1.3.6.1.4.1.351.100.4.3.8.1.41 | atmEndptOeMFS | 0 | 0 | This object is not used by the new UPC algorithm, and its value is meaningless. Any attempt to write to this object will fail. |
1.3.6.1.4.1.351.100.4.3.8.1.42 | atmEndptOeCCDV | 0 | 0 | The value of this object is equal to the Compliant Cell Delay Variation for this end-point. It corresponds to the CDVT(0+1) param… |
1.3.6.1.4.1.351.100.4.3.8.1.43 | atmEndptOeHiCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging activation threshold for the other end-point. This obje… |
1.3.6.1.4.1.351.100.4.3.8.1.44 | atmEndptOeLoCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging deactivation threshold for the other end-point. This ob… |
1.3.6.1.4.1.351.100.4.3.8.1.45 | atmEndptCLPTagging | 0 | 0 | The value of this object enables the CLP (Cell Loss Priority) tagging for handling non-compliant cells. When enabled the CLP bit … |
1.3.6.1.4.1.351.100.4.3.8.1.46 | atmEndptUPC | 0 | 0 | The value of this object enables the UPC algorithm. |
1.3.6.1.4.1.351.100.4.3.8.1.47 | atmEndptEnableFST | 0 | 0 | The value of this object determines whether or not the ForeSight option is being used for this . If set to false, then ForeSight… |
1.3.6.1.4.1.351.100.4.3.8.1.48 | atmEndptRateUpICA | 0 | 0 | The value of this object is equal to the ForeSight Rate Up value in cells per second per adjust for this end point. |
1.3.6.1.4.1.351.100.4.3.8.1.49 | atmEndptRateDnICA | 0 | 0 | The value of this object is equal to the ForeSight Rate Down value expressed as percentage of MCR. |
1.3.6.1.4.1.351.100.4.3.8.1.50 | atmEndptFastDnICA | 0 | 0 | The value of this object is equal to the ForeSight Fast Down value expressed as percentage of MCR. |
1.3.6.1.4.1.351.100.4.3.8.1.51 | atmEndptToQIR | 0 | 0 | The value of this object is equal to the QIR timeout value. This object corresponds to the Initial Cell Rate (ICR) timeout. |
1.3.6.1.4.1.351.100.4.3.8.1.52 | atmEndptMinAdjustICA | 0 | 0 | The value of this object is equal to the ForeSight minimum adjustment period. |
1.3.6.1.4.1.351.100.4.3.8.1.53 | atmEndptGroupFlag | 0 | 0 | Specifies whether this is a grouped connection. Note that MIB object connGroupFlag provides grouping information about all the co… |
1.3.6.1.4.1.351.100.4.3.8.1.54 | atmEndptOamStatus | 0 | 0 | The end to end OAM state. |
1.3.6.1.4.1.351.100.4.3.8.1.55 | atmEndptBCM | 0 | 0 | The value of this object enables the generation of RM cells when congestion is detected in this connection. |
1.3.6.1.4.1.351.100.4.3.8.1.56 | atmEndptFGCRA | 0 | 0 | The value of this object enables FGCRA. FGCRA (Frame-based Generic Rate Control Algorithm) is applicable with AAL-5 traffic only.… |
1.3.6.1.4.1.351.100.4.3.8.1.57 | atmEndptLocLpbkState | 0 | 0 | Specifies the Local Loopback State the user would like to set for the endpoint. |
1.3.6.1.4.1.351.100.4.3.8.1.58 | atmEndptLpbkStatus | 0 | 0 | Specifies the current Loopback State of the endpoint. The value returned from this object is a bitmap of the current loopback sta… |
1.3.6.1.4.1.351.100.4.3.8.1.59 | atmEndptTestType | 0 | 0 | Specifies the type of test the user would like to conduct on this endpoint. Only testDelay is currently defined. TestDelay calcu… |
1.3.6.1.4.1.351.100.4.3.8.1.60 | atmEndptRtdTestDelay | 0 | 0 | The value of this object is the calculated round trip delay (measured in milliseconds) for an OAM cell that is sent across the ne… |
1.3.6.1.4.1.351.100.4.3.8.1.61 | atmEndptOeBCM | 0 | 0 | The value of this object enables the generation of RM cells when congestion is detected in this connection. This is the other end… |
1.3.6.1.4.1.351.100.4.3.8.1.62 | atmEndptOeFGCRA | 0 | 0 | The value of this object enables FGCRA. FGCRA (Frame-based Generic Rate Control Algorithm) is applicable with AAL-5 traffic only.… |
1.3.6.1.4.1.351.100.4.3.8.1.63 | atmEndptGroupDesc | 0 | 0 | String describing the group this endpoint is associated with. The format of the group text description is domain.node.grp-number… |
1.3.6.1.4.1.351.100.4.3.8.1.64 | atmEndptLocRmtLpbkState | 0 | 0 | Specifies the Local-Remote Loopback State the user would like to set for the endpoint. |
1.3.6.1.4.1.351.100.4.3.8.1.65 | atmEndptScrPlc | 0 | 0 | Specifies the traffic policing for this end point This object can be set only if atmEndptUPC is enabled. |
1.3.6.1.4.1.351.100.4.3.8.1.66 | atmEndptOeScrPlc | 0 | 0 | Specifies the traffic policing for the other end point. This object can be set only if atmEndptUPC is enabled. |
1.3.6.1.4.1.351.100.4.3.8.1.67 | atmEndptPCR0 | 0 | 0 | The peak cell rate (in cells per second) for the second bucket for this end point. This object corresponds to the parameter PCR(0… |
1.3.6.1.4.1.351.100.4.3.8.1.68 | atmEndptOePCR0 | 0 | 0 | The peak cell rate (in cells per second) for the second bucket for the other end point. This object corresponds to the parameter … |
1.3.6.1.4.1.351.100.4.3.8.1.70 | atmEndptOeCDVT0 | 0 | 0 | The cell delay variation tolerance for the second bucket for the other end point. This object corresponds to the parameter CDVT(0… |
1.3.6.1.4.1.351.100.4.3.8.1.71 | atmEndptOeRateUpICA | 0 | 0 | The value of this object is equal to the ForeSight Rate Up value in cells per second per adjust for the other end point. |
1.3.6.1.4.1.351.100.4.3.8.1.72 | atmEndptFRTT | 0 | 0 | The Fixed Round-Trip Time (FRTT) is the sum of the fixed and propagation delays from the source to a destination and back. . Units… |
1.3.6.1.4.1.351.100.4.3.8.1.73 | atmEndptTBE | 0 | 0 | Transient Buffer Exposure (TBE) is the negotiated number of cells that the network would like to limit the source to sending duri… |
1.3.6.1.4.1.351.100.4.3.8.1.74 | atmEndptVSVD | 0 | 0 | Virtual Source/Virtual Destination (VS/VD) is used to divide an ABR connection into two or more separately controlled ABR segment… |
1.3.6.1.4.1.351.100.4.3.8.1.75 | atmEndptPolicing | 0 | 0 | Specifies the traffic policing for this end point. Policing Type 1st Bucket 2nd Bucket vbr.1 CLP(0+1) CLP(0+1) vbr.2… |
1.3.6.1.4.1.351.100.4.3.8.1.76 | atmEndptPCR | 0 | 0 | PCR(0+1), Peak Cell Rate, specifies an upper bound on rate at which traffic can be submitted on an ATM connection. This object ap… |