The peak cell rate (in cells per second) for the
second bucket for this end point. This object
corresponds to the parameter PCR(0) in standard
ATM documents.
Parsed from file STRATACOM-MIB.mib
Module: STRATACOM-MIB
Vendor: Stratacom
Module: STRATACOM-MIB
[Automatically extracted from oidview.com]
atmBwClassPCR0 OBJECT-TYPE SYNTAX INTEGER (7..353208) ACCESS read-only STATUS mandatory DESCRIPTION "The peak cell rate (in cells per second) for the second bucket for this end point. This object corresponds to the parameter PCR(0) in standard ATM documents." ::= { atmBwClassEntry 44 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.100.4.3.9.1.1 | atmBwClassIndex | 0 | 0 | Index into atmBwClassTable. This index identifies the ATM bandwidth class. |
| 1.3.6.1.4.1.351.100.4.3.9.1.2 | atmBwClassMIR | 0 | 0 | The minimum transmit bandwidth (MIR) parameter (in cells per second) for this end-point. For VBR and ATF without Foresight connec… |
| 1.3.6.1.4.1.351.100.4.3.9.1.3 | atmBwClassCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in cells per second) for this end-point. For … |
| 1.3.6.1.4.1.351.100.4.3.9.1.4 | atmBwClassVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in cells) for this end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.5 | atmBwClassPIR | 0 | 0 | The peak transmit bandwidth (PIR) parameter (in cells per second) for this end-point. This object applies only to ABR and ATF wit… |
| 1.3.6.1.4.1.351.100.4.3.9.1.6 | atmBwClassEfciQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for this end-point's transmit queue. This value is a … |
| 1.3.6.1.4.1.351.100.4.3.9.1.7 | atmBwClassQIR | 0 | 0 | The transmit quiescent information rate (QIR) parameter (in cells per second) for this end-point. This value can range between th… |
| 1.3.6.1.4.1.351.100.4.3.9.1.8 | atmBwClassPercUtil | 0 | 0 | The value of this object is equal to the channel percentage utilization setting for this end-point. This is the expected long-ter… |
| 1.3.6.1.4.1.351.100.4.3.9.1.9 | atmBwClassCBS | 0 | 0 | The value of this object is equal to the Compliant Burst Size in cells for this end-point. This object corresponds to the Maximum… |
| 1.3.6.1.4.1.351.100.4.3.9.1.10 | atmBwClassIBS | 0 | 0 | The value of this object is equal to the Initial Burst Size in cells for this end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.11 | atmBwClassMFS | 0 | 0 | This object is not used by the new UPC algorithm, and its value is meaningless. |
| 1.3.6.1.4.1.351.100.4.3.9.1.12 | atmBwClassCCDV | 0 | 0 | The value of this object is equal to the Compliant Cell Delay Variation for this end-point. It corresponds to the CDVT(0+1) param… |
| 1.3.6.1.4.1.351.100.4.3.9.1.13 | atmBwClassHiCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging activation threshold for this end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.14 | atmBwClassLoCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging deactivation threshold for this end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.15 | atmBwClassOeMIR | 0 | 0 | The minimum receive bandwidth (MIR) parameter (in cells per second) for the other end-point. For VBR and ATF without Foresight co… |
| 1.3.6.1.4.1.351.100.4.3.9.1.16 | atmBwClassOeCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in cells per second) for the other end-point… |
| 1.3.6.1.4.1.351.100.4.3.9.1.17 | atmBwClassOeVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in cells) for the other end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.18 | atmBwClassOePIR | 0 | 0 | The peak receive bandwidth (PIR) parameter (in cells per second) for the other end-point. This object applies only to ABR and ATF… |
| 1.3.6.1.4.1.351.100.4.3.9.1.19 | atmBwClassOeEfciQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for the other end-point's transmit queue. |
| 1.3.6.1.4.1.351.100.4.3.9.1.20 | atmBwClassOeQIR | 0 | 0 | The transmit quiescent information rate (QIR) parameter (in cells bits per second) for the other end-point. This value can range … |
| 1.3.6.1.4.1.351.100.4.3.9.1.21 | atmBwClassOePercUtil | 0 | 0 | The value of this object is equal to the channel percentage utilization setting for the other end-point. This is the expected lon… |
| 1.3.6.1.4.1.351.100.4.3.9.1.22 | atmBwClassOeCBS | 0 | 0 | The value of this object is equal to the Compliant Burst Size in cells for the other end-point. This object corresponds to the Ma… |
| 1.3.6.1.4.1.351.100.4.3.9.1.23 | atmBwClassOeIBS | 0 | 0 | The value of this object is equal to the Initial Burst Size in cells for the other end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.24 | atmBwClassOeMFS | 0 | 0 | This object is not used by the new UPC algorithm, and its value is meaningless. |
| 1.3.6.1.4.1.351.100.4.3.9.1.25 | atmBwClassOeCCDV | 0 | 0 | The value of this object is equal to the Compliant Cell Delay Variation for the other end-point. It corresponds to the CDVT(0+1) … |
| 1.3.6.1.4.1.351.100.4.3.9.1.26 | atmBwClassOeHiCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging activation threshold for the other end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.27 | atmBwClassOeLoCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging deactivation threshold for the other end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.28 | atmBwClassCLPTagging | 0 | 0 | The value of this object enables the CLP (Cell Loss Priority) tagging for handling non-compliant cells. When enabled the CLP bit … |
| 1.3.6.1.4.1.351.100.4.3.9.1.29 | atmBwClassUPC | 0 | 0 | The value of this object enables the UPC algorithm. |
| 1.3.6.1.4.1.351.100.4.3.9.1.30 | atmBwClassEnableFST | 0 | 0 | The value of this object determines whether or not the ForeSight option is being used for this . If set to false, then ForeSight… |
| 1.3.6.1.4.1.351.100.4.3.9.1.31 | atmBwClassRateUpICA | 0 | 0 | The value of this object is equal to the ForeSight Rate Up value in cells per second per adjust for this end point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.32 | atmBwClassRateDnICA | 0 | 0 | The value of this object is equal to the ForeSight Rate Down value expressed as percentage of MCR. |
| 1.3.6.1.4.1.351.100.4.3.9.1.33 | atmBwClassFastDnICA | 0 | 0 | The value of this object is equal to the ForeSight Fast Down value expressed as percentage of MCR. |
| 1.3.6.1.4.1.351.100.4.3.9.1.34 | atmBwClassToQIR | 0 | 0 | The value of this object is equal to the QIR timeout value. This object corresponds to the Initial Cell Rate (ICR) timeout. |
| 1.3.6.1.4.1.351.100.4.3.9.1.35 | atmBwClassMinAdjustICA | 0 | 0 | The value of this object is equal to the ForeSight minimum adjustment period. |
| 1.3.6.1.4.1.351.100.4.3.9.1.36 | atmBwClassDescription | 0 | 0 | This MIB object contains a textual description of this frame relay bandwidth class. |
| 1.3.6.1.4.1.351.100.4.3.9.1.37 | atmBwClassBCM | 0 | 0 | The value of this object enables the generation of RM cells when congestion is detected in the connection. |
| 1.3.6.1.4.1.351.100.4.3.9.1.38 | atmBwClassFGCRA | 0 | 0 | The value of this object enables FGCRA. FGCRA (Frame-based Generic Rate Control Algorithm) is applicable with AAL-5 traffic only. |
| 1.3.6.1.4.1.351.100.4.3.9.1.39 | atmBwClassOeBCM | 0 | 0 | The value of this object enables the generation of RM cells when congestion is detected in the connection. This is the other endp… |
| 1.3.6.1.4.1.351.100.4.3.9.1.40 | atmBwClassOeFGCRA | 0 | 0 | The value of this object enables FGCRA. FGCRA (Frame-based Generic Rate Control Algorithm) is applicable with AAL-5 traffic only.… |
| 1.3.6.1.4.1.351.100.4.3.9.1.41 | atmBwClassConType | 0 | 0 | The value of this object defines the connection type associated with this class. |
| 1.3.6.1.4.1.351.100.4.3.9.1.42 | atmBwClassScrPlc | 0 | 0 | Specifies the traffic policing for this end point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.43 | atmBwClassOeScrPlc | 0 | 0 | Specifies the traffic policing for the other end point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.45 | atmBwClassOePCR0 | 0 | 0 | The peak cell rate (in cells per second) for the second bucket for the other end point. This object corresponds to the parameter … |
| 1.3.6.1.4.1.351.100.4.3.9.1.46 | atmBwClassCDVT0 | 0 | 0 | The cell delay variation tolerance for the second bucket for this end point. This object corresponds to the parameter CDVT(0) in … |
| 1.3.6.1.4.1.351.100.4.3.9.1.47 | atmBwClassOeCDVT0 | 0 | 0 | The cell delay variation tolerance for the second bucket for the other end point. This object corresponds to the parameter CDVT(0… |
| 1.3.6.1.4.1.351.100.4.3.9.1.48 | atmBwClassOeRateUpICA | 0 | 0 | The value of this object is equal to the ForeSight Rate Up value in cells per second per adjust for the other end point. |