The value of this object is equal to the channel
percentage utilization setting for this end-point.
This is the expected long-term utilization of the
channel by this end-point.
Parsed from file STRATACOM-MIB.mib
Module: STRATACOM-MIB
Vendor: Stratacom
Module: STRATACOM-MIB
[Automatically extracted from oidview.com]
atmBwClassPercUtil OBJECT-TYPE SYNTAX INTEGER (1..100) ACCESS read-only STATUS mandatory DESCRIPTION "The value of this object is equal to the channel percentage utilization setting for this end-point. This is the expected long-term utilization of the channel by this end-point." ::= { atmBwClassEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.100.4.3.9.1.1 | atmBwClassIndex | 0 | 0 | Index into atmBwClassTable. This index identifies the ATM bandwidth class. |
| 1.3.6.1.4.1.351.100.4.3.9.1.2 | atmBwClassMIR | 0 | 0 | The minimum transmit bandwidth (MIR) parameter (in cells per second) for this end-point. For VBR and ATF without Foresight connec… |
| 1.3.6.1.4.1.351.100.4.3.9.1.3 | atmBwClassCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in cells per second) for this end-point. For … |
| 1.3.6.1.4.1.351.100.4.3.9.1.4 | atmBwClassVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in cells) for this end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.5 | atmBwClassPIR | 0 | 0 | The peak transmit bandwidth (PIR) parameter (in cells per second) for this end-point. This object applies only to ABR and ATF wit… |
| 1.3.6.1.4.1.351.100.4.3.9.1.6 | atmBwClassEfciQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for this end-point's transmit queue. This value is a … |
| 1.3.6.1.4.1.351.100.4.3.9.1.7 | atmBwClassQIR | 0 | 0 | The transmit quiescent information rate (QIR) parameter (in cells per second) for this end-point. This value can range between th… |
| 1.3.6.1.4.1.351.100.4.3.9.1.9 | atmBwClassCBS | 0 | 0 | The value of this object is equal to the Compliant Burst Size in cells for this end-point. This object corresponds to the Maximum… |
| 1.3.6.1.4.1.351.100.4.3.9.1.10 | atmBwClassIBS | 0 | 0 | The value of this object is equal to the Initial Burst Size in cells for this end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.11 | atmBwClassMFS | 0 | 0 | This object is not used by the new UPC algorithm, and its value is meaningless. |
| 1.3.6.1.4.1.351.100.4.3.9.1.12 | atmBwClassCCDV | 0 | 0 | The value of this object is equal to the Compliant Cell Delay Variation for this end-point. It corresponds to the CDVT(0+1) param… |
| 1.3.6.1.4.1.351.100.4.3.9.1.13 | atmBwClassHiCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging activation threshold for this end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.14 | atmBwClassLoCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging deactivation threshold for this end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.15 | atmBwClassOeMIR | 0 | 0 | The minimum receive bandwidth (MIR) parameter (in cells per second) for the other end-point. For VBR and ATF without Foresight co… |
| 1.3.6.1.4.1.351.100.4.3.9.1.16 | atmBwClassOeCIR | 0 | 0 | The value of this object is equal to the committed information rate (CIR) parameter (in cells per second) for the other end-point… |
| 1.3.6.1.4.1.351.100.4.3.9.1.17 | atmBwClassOeVcQSize | 0 | 0 | The value of this object is the maximum queue depth (in cells) for the other end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.18 | atmBwClassOePIR | 0 | 0 | The peak receive bandwidth (PIR) parameter (in cells per second) for the other end-point. This object applies only to ABR and ATF… |
| 1.3.6.1.4.1.351.100.4.3.9.1.19 | atmBwClassOeEfciQSize | 0 | 0 | The threshold setting used by the explicit congestion notification feature for the other end-point's transmit queue. |
| 1.3.6.1.4.1.351.100.4.3.9.1.20 | atmBwClassOeQIR | 0 | 0 | The transmit quiescent information rate (QIR) parameter (in cells bits per second) for the other end-point. This value can range … |
| 1.3.6.1.4.1.351.100.4.3.9.1.21 | atmBwClassOePercUtil | 0 | 0 | The value of this object is equal to the channel percentage utilization setting for the other end-point. This is the expected lon… |
| 1.3.6.1.4.1.351.100.4.3.9.1.22 | atmBwClassOeCBS | 0 | 0 | The value of this object is equal to the Compliant Burst Size in cells for the other end-point. This object corresponds to the Ma… |
| 1.3.6.1.4.1.351.100.4.3.9.1.23 | atmBwClassOeIBS | 0 | 0 | The value of this object is equal to the Initial Burst Size in cells for the other end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.24 | atmBwClassOeMFS | 0 | 0 | This object is not used by the new UPC algorithm, and its value is meaningless. |
| 1.3.6.1.4.1.351.100.4.3.9.1.25 | atmBwClassOeCCDV | 0 | 0 | The value of this object is equal to the Compliant Cell Delay Variation for the other end-point. It corresponds to the CDVT(0+1) … |
| 1.3.6.1.4.1.351.100.4.3.9.1.26 | atmBwClassOeHiCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging activation threshold for the other end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.27 | atmBwClassOeLoCLP | 0 | 0 | The value of this object is equal to the CLP (Cell Loss Priority) tagging deactivation threshold for the other end-point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.28 | atmBwClassCLPTagging | 0 | 0 | The value of this object enables the CLP (Cell Loss Priority) tagging for handling non-compliant cells. When enabled the CLP bit … |
| 1.3.6.1.4.1.351.100.4.3.9.1.29 | atmBwClassUPC | 0 | 0 | The value of this object enables the UPC algorithm. |
| 1.3.6.1.4.1.351.100.4.3.9.1.30 | atmBwClassEnableFST | 0 | 0 | The value of this object determines whether or not the ForeSight option is being used for this . If set to false, then ForeSight… |
| 1.3.6.1.4.1.351.100.4.3.9.1.31 | atmBwClassRateUpICA | 0 | 0 | The value of this object is equal to the ForeSight Rate Up value in cells per second per adjust for this end point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.32 | atmBwClassRateDnICA | 0 | 0 | The value of this object is equal to the ForeSight Rate Down value expressed as percentage of MCR. |
| 1.3.6.1.4.1.351.100.4.3.9.1.33 | atmBwClassFastDnICA | 0 | 0 | The value of this object is equal to the ForeSight Fast Down value expressed as percentage of MCR. |
| 1.3.6.1.4.1.351.100.4.3.9.1.34 | atmBwClassToQIR | 0 | 0 | The value of this object is equal to the QIR timeout value. This object corresponds to the Initial Cell Rate (ICR) timeout. |
| 1.3.6.1.4.1.351.100.4.3.9.1.35 | atmBwClassMinAdjustICA | 0 | 0 | The value of this object is equal to the ForeSight minimum adjustment period. |
| 1.3.6.1.4.1.351.100.4.3.9.1.36 | atmBwClassDescription | 0 | 0 | This MIB object contains a textual description of this frame relay bandwidth class. |
| 1.3.6.1.4.1.351.100.4.3.9.1.37 | atmBwClassBCM | 0 | 0 | The value of this object enables the generation of RM cells when congestion is detected in the connection. |
| 1.3.6.1.4.1.351.100.4.3.9.1.38 | atmBwClassFGCRA | 0 | 0 | The value of this object enables FGCRA. FGCRA (Frame-based Generic Rate Control Algorithm) is applicable with AAL-5 traffic only. |
| 1.3.6.1.4.1.351.100.4.3.9.1.39 | atmBwClassOeBCM | 0 | 0 | The value of this object enables the generation of RM cells when congestion is detected in the connection. This is the other endp… |
| 1.3.6.1.4.1.351.100.4.3.9.1.40 | atmBwClassOeFGCRA | 0 | 0 | The value of this object enables FGCRA. FGCRA (Frame-based Generic Rate Control Algorithm) is applicable with AAL-5 traffic only.… |
| 1.3.6.1.4.1.351.100.4.3.9.1.41 | atmBwClassConType | 0 | 0 | The value of this object defines the connection type associated with this class. |
| 1.3.6.1.4.1.351.100.4.3.9.1.42 | atmBwClassScrPlc | 0 | 0 | Specifies the traffic policing for this end point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.43 | atmBwClassOeScrPlc | 0 | 0 | Specifies the traffic policing for the other end point. |
| 1.3.6.1.4.1.351.100.4.3.9.1.44 | atmBwClassPCR0 | 0 | 0 | The peak cell rate (in cells per second) for the second bucket for this end point. This object corresponds to the parameter PCR(0… |
| 1.3.6.1.4.1.351.100.4.3.9.1.45 | atmBwClassOePCR0 | 0 | 0 | The peak cell rate (in cells per second) for the second bucket for the other end point. This object corresponds to the parameter … |
| 1.3.6.1.4.1.351.100.4.3.9.1.46 | atmBwClassCDVT0 | 0 | 0 | The cell delay variation tolerance for the second bucket for this end point. This object corresponds to the parameter CDVT(0) in … |
| 1.3.6.1.4.1.351.100.4.3.9.1.47 | atmBwClassOeCDVT0 | 0 | 0 | The cell delay variation tolerance for the second bucket for the other end point. This object corresponds to the parameter CDVT(0… |
| 1.3.6.1.4.1.351.100.4.3.9.1.48 | atmBwClassOeRateUpICA | 0 | 0 | The value of this object is equal to the ForeSight Rate Up value in cells per second per adjust for the other end point. |