This respesents bit map of the VSI Controllers
supported. Currently, we have
BIT 0 - PAR
BIT 1 - PNNI
BIT 2 - TAG
(e.g. A value of 1 in BIT 0 indicates the presence of PAR )
Remaining bits are set to 0.
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
This respesents bit map of the VSI Controllers
supported.
The bit positions are :
BIT 0 - PAR(Portable AutoRoute Controller)
BIT 1 - PNNI(Private network to network Interface)
BIT 2 - TAG(Tag Switching or MPLS Controller)
(e.g. A value of 1 in BIT 0 indicates the presence of PAR )
Remaining bits are set to 0.
This respesents bit map of the VSI Controllers
supported.
The bit positions are :
BIT 0 - PAR(Portable AutoRoute Controller)
BIT 1 - PNNI(Private network to network Interface)
BIT 2 - TAG(Tag Switching or MPLS Controller)
(e.g. A value of 1 in BIT 0 indicates the presence of PAR )
Remaining bits are set to 0.
Parsed from file CISCO-MGX82XX-CARD-FEATURE-MIB.my.txt
Company: None
Module: CISCO-MGX82XX-CARD-FEATURE-MIB
This respesents bit map of the VSI Controllers
supported.
The bit positions are :
BIT 0 - PAR(Portable AutoRoute Controller)
BIT 1 - PNNI(Private network to network Interface)
BIT 2 - TAG(Tag Switching or MPLS Controller)
(e.g. A value of 1 in BIT 0 indicates the presence of PAR )
Remaining bits are set to 0.
vsiControllersAllowed OBJECT-TYPE SYNTAX INTEGER (0..'ffffff'h) ACCESS read-only STATUS mandatory DESCRIPTION "This respesents bit map of the VSI Controllers supported. Currently, we have BIT 0 - PAR BIT 1 - PNNI BIT 2 - TAG (e.g. A value of 1 in BIT 0 indicates the presence of PAR ) Remaining bits are set to 0. " ::= { pxmFeatures 1 }
vsiControllersAllowed OBJECT-TYPE SYNTAX INTEGER(0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This respesents bit map of the VSI Controllers supported. The bit positions are : BIT 0 - PAR(Portable AutoRoute Controller) BIT 1 - PNNI(Private network to network Interface) BIT 2 - TAG(Tag Switching or MPLS Controller) (e.g. A value of 1 in BIT 0 indicates the presence of PAR ) Remaining bits are set to 0." ::= { pxmFeatures 1 }
Vendor: Stratacom
Module: CISCO-MGX82XX-CARD-FEATURE-MIB
[Automatically extracted from oidview.com]
vsiControllersAllowed OBJECT-TYPE SYNTAX Integer32 (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "This respesents bit map of the VSI Controllers supported. The bit positions are : BIT 0 - PAR(Portable AutoRoute Controller) BIT 1 - PNNI(Private network to network Interface) BIT 2 - TAG(Tag Switching or MPLS Controller) (e.g. A value of 1 in BIT 0 indicates the presence of PAR ) Remaining bits are set to 0." ::= { pxmFeatures 1 }
vsiControllersAllowed OBJECT-TYPE SYNTAX Integer32 (0..16777215) MAX-ACCESS read-only STATUS current DESCRIPTION "This respesents bit map of the VSI Controllers supported. The bit positions are : BIT 0 - PAR(Portable AutoRoute Controller) BIT 1 - PNNI(Private network to network Interface) BIT 2 - TAG(Tag Switching or MPLS Controller) (e.g. A value of 1 in BIT 0 indicates the presence of PAR ) Remaining bits are set to 0." ::= { pxmFeatures 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.3.15.1.0 | vsiControllersAllowed | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.3.15.2 | apsCardAttributes | 1 | 1 | This respesents bit map of the APS card attributes supported. Currently, we have BIT 0, 1 - unused BIT 2 - APS standard protocol… |
1.3.6.1.4.1.351.110.3.15.3 | trkCACEnable | 1 | 1 | This MIB variable allows to add a new connection on the feeder trunk even if it is over-subscribed. |
1.3.6.1.4.1.351.110.3.15.4 | pxmCardCacMode | 1 | 1 | This object identifies the CAC mode set on a card. If this is set to pcrBasedCAC(1) then the CAC calculations will be done based … |