This object identifies the CAC mode set on a card.
If this is set to pcrBasedCAC(1) then the CAC calculations
will be done based on PCR on the connection.
If this set to scrBasedCAC(2) then the CAC calculations
are done based on the scr of the connections.
This will be applicable only if CAC is enabled
(i.e trkCACEnable is set to enable(2)).
Parsed from file CISCO-MGX82XX-CARD-FEATURE-MIB.mib
Module: CISCO-MGX82XX-CARD-FEATURE-MIB
This object identifies the CAC mode set on a card.
If this is set to pcrBasedCAC(1) then the CAC calculations
will be done based on PCR on the connection.
If this set to scrBasedCAC(2) then the CAC calculations
are done based on the scr of the connections.
This will be applicable only if CAC is enabled
(i.e trkCACEnable is set to enable(2)).
This object identifies the CAC mode set on a card.
If this is set to pcrBasedCAC(1) then the CAC calculations
will be done based on PCR on the connection.
If this set to scrBasedCAC(2) then the CAC calculations
are done based on the scr of the connections.
This will be applicable only if CAC is enabled
(i.e trkCACEnable is set to enable(2)).
Parsed from file CISCO-MGX82XX-CARD-FEATURE-MIB.my.txt
Company: None
Module: CISCO-MGX82XX-CARD-FEATURE-MIB
This object identifies the CAC mode set on a card.
If this is set to pcrBasedCAC(1) then the CAC calculations
will be done based on PCR on the connection.
If this set to scrBasedCAC(2) then the CAC calculations
are done based on the scr of the connections.
This will be applicable only if CAC is enabled
(i.e trkCACEnable is set to enable(2)).
pxmCardCacMode OBJECT-TYPE SYNTAX INTEGER { pcrBasedCac (1), scrBasedCac (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the CAC mode set on a card. If this is set to pcrBasedCAC(1) then the CAC calculations will be done based on PCR on the connection. If this set to scrBasedCAC(2) then the CAC calculations are done based on the scr of the connections. This will be applicable only if CAC is enabled (i.e trkCACEnable is set to enable(2))." DEFVAL { pcrBasedCac } ::= { pxmFeatures 4 }
pxmCardCacMode OBJECT-TYPE SYNTAX INTEGER { pcrBasedCac(1), scrBasedCac(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object identifies the CAC mode set on a card. If this is set to pcrBasedCAC(1) then the CAC calculations will be done based on PCR on the connection. If this set to scrBasedCAC(2) then the CAC calculations are done based on the scr of the connections. This will be applicable only if CAC is enabled (i.e trkCACEnable is set to enable(2))." DEFVAL { pcrBasedCac } ::= { pxmFeatures 4 }
Vendor: Stratacom
Module: CISCO-MGX82XX-CARD-FEATURE-MIB
[Automatically extracted from oidview.com]
pxmCardCacMode OBJECT-TYPE SYNTAX INTEGER { pcrBasedCac (1), scrBasedCac (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the CAC mode set on a card. If this is set to pcrBasedCAC(1) then the CAC calculations will be done based on PCR on the connection. If this set to scrBasedCAC(2) then the CAC calculations are done based on the scr of the connections. This will be applicable only if CAC is enabled (i.e trkCACEnable is set to enable(2))." DEFVAL { pcrBasedCac } ::= { pxmFeatures 4 }
pxmCardCacMode OBJECT-TYPE SYNTAX INTEGER { pcrBasedCac (1), scrBasedCac (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the CAC mode set on a card. If this is set to pcrBasedCAC(1) then the CAC calculations will be done based on PCR on the connection. If this set to scrBasedCAC(2) then the CAC calculations are done based on the scr of the connections. This will be applicable only if CAC is enabled (i.e trkCACEnable is set to enable(2))." DEFVAL { pcrBasedCac } ::= { pxmFeatures 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.3.15.4.0 | pxmCardCacMode | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.3.15.1 | vsiControllersAllowed | 1 | 1 | This respesents bit map of the VSI Controllers supported. Currently, we have BIT 0 - PAR BIT 1 - PNNI BIT 2 - TAG (e.g. A value … |
1.3.6.1.4.1.351.110.3.15.2 | apsCardAttributes | 1 | 1 | This respesents bit map of the APS card attributes supported. Currently, we have BIT 0, 1 - unused BIT 2 - APS standard protocol… |
1.3.6.1.4.1.351.110.3.15.3 | trkCACEnable | 1 | 1 | This MIB variable allows to add a new connection on the feeder trunk even if it is over-subscribed. |