This attribute sets the payload type of a RTP packet carrying SID
which is sent to the other end when silence is detected. The default
value is in accordance to the earlier revisions of
draft-ietf-avt-provile-new-10.txt
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
This attribute sets the payload type of a RTP packet
carrying SID(Silence Insertion Descriptor) which is
sent to the other end when silence is detected. The
default value is in accordance to RFC-3551.
This attribute sets the payload type of a RTP packet
carrying SID(Silence Insertion Descriptor) which is
sent to the other end when silence is detected. The
default value is in accordance to RFC-3551.
Parsed from file CISCO-VISM-MODULE-MIB.my.txt
Company: None
Module: CISCO-VISM-MODULE-MIB
This attribute sets the payload type of a RTP packet
carrying SID(Silence Insertion Descriptor) which is
sent to the other end when silence is detected. The
default value is in accordance to RFC-3551.
vismVoIpSIDPayloadType OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute sets the payload type of a RTP packet carrying SID which is sent to the other end when silence is detected. The default value is in accordance to the earlier revisions of draft-ietf-avt-provile-new-10.txt " DEFVAL { 13 } ::= {vismVoIpGrp 10}
vismVoIpSIDPayloadType OBJECT-TYPE SYNTAX INTEGER(0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute sets the payload type of a RTP packet carrying SID(Silence Insertion Descriptor) which is sent to the other end when silence is detected. The default value is in accordance to RFC-3551." DEFVAL { 13 } ::= { vismVoIpGrp 10 }
Vendor: Stratacom
Module: CISCO-VISM-MODULE-MIB
[Automatically extracted from oidview.com]
vismVoIpSIDPayloadType OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute sets the payload type of a RTP packet carrying SID(Silence Insertion Descriptor) which is sent to the other end when silence is detected. The default value is in accordance to RFC-3551. " DEFVAL { 13 } ::= { vismVoIpGrp 10 }
vismVoIpSIDPayloadType OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute sets the payload type of a RTP packet carrying SID(Silence Insertion Descriptor) which is sent to the other end when silence is detected. The default value is in accordance to RFC-3551. " DEFVAL { 13 } ::= { vismVoIpGrp 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.3.17.2.10.0 | vismVoIpSIDPayloadType | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.3.17.2.1 | vismBearerTos | 1 | 1 | This object is used to provision the bitmask used for the TOS (Type Of Service) octet for cells carrying VoIP bearer (RTP ) traff… |
| 1.3.6.1.4.1.351.110.3.17.2.2 | vismRtcpRepInterval | 1 | 1 | This attribute defines the RTCP(Real-time Transport Control Protocol) report interval (defined in RFC 1889). This indicates the i… |
| 1.3.6.1.4.1.351.110.3.17.2.3 | vismRtpReceiveTimer | 1 | 1 | This object defines whether the RTP packets receive timer on the VISM needs to be enabled or not. For some VoIP applications if a… |
| 1.3.6.1.4.1.351.110.3.17.2.4 | vismPacketizationPeriod | 1 | 1 | This object is used to provision the packetization period to be applied and is applicable for VoIP only. For VoAAL2 adaptations, … |
| 1.3.6.1.4.1.351.110.3.17.2.5 | vismVoIpDtmfRelay | 1 | 1 | This attribute defines whether the DTMF (Dual Tone Multi-Frequency) digits need to be transported to the other endpoint via NSE(Na… |
| 1.3.6.1.4.1.351.110.3.17.2.6 | vismVoIpCasTransport | 1 | 1 | This attribute defines whether the CAS(Channel Associated Signaling) bits need to be transported to the other endpoint via NSE pa… |
| 1.3.6.1.4.1.351.110.3.17.2.7 | vismVoIpTripleRedundancy | 1 | 1 | This attribute defines whether triple redundancy is enabled or not. With triple redundancy, NSEs are sent three times at 20 ms in… |
| 1.3.6.1.4.1.351.110.3.17.2.8 | vismVoIpVADTimer | 1 | 1 | This attribute defines the hangover time for VAD(Voice Activity Detection) in milliseconds. Once the voice inactivity is detected… |
| 1.3.6.1.4.1.351.110.3.17.2.9 | vismVoIpNTECapabilityNegotiate | 1 | 1 | This attribute defines whether the VISM has the capability to negotiate the list of events either NSE or NTE(Named Telephony Even… |
| 1.3.6.1.4.1.351.110.3.17.2.11 | vismVoIpDPvcOamCellGap | 1 | 1 | This attribute defines the inter cell gap for dual PVC OAM cells. The value represents the time in milliseconds. |
| 1.3.6.1.4.1.351.110.3.17.2.12 | vismVoIpDPvcRetryCnt | 1 | 1 | This attribute defines the threshold for failure of a PVC. If the number of consecutive OAM cells sent for which no ack was rece… |
| 1.3.6.1.4.1.351.110.3.17.2.13 | vismVoIpDPvcRecoverCnt | 1 | 1 | This attribute defines the threshold for recovery of a PVC. If the number of consecutive OAM cells sent for which ack was receiv… |
| 1.3.6.1.4.1.351.110.3.17.2.14 | vismRtcpRecvMultiplier | 1 | 1 | The object vismRtcpRepInterval specified above defines an approximate RTCP report interval (defined in RFC 1889) which indicates … |
| 1.3.6.1.4.1.351.110.3.17.2.15 | vismVoIpLapdTrunkPVC | 1 | 1 | This object should be used for VoIP Trunking applications and only if the signalling type is configured to be CCS. By default th… |
| 1.3.6.1.4.1.351.110.3.17.2.16 | vismVoIpEventNegotiationPolicy | 1 | 1 | This attribute defines whether or not the VISM should advertise the event codecs, NSE, NTE, or Cisco-rtp, in addition to the list… |