This attribute defines the hangover time for VAD in milliseconds.
Once the voice inactivity is detected, the gateway will wait for
this duration before activating silence suppression.
The value in this object will be utilized when the Call Agent does
not specify this.
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
This attribute defines the hangover time for
VAD(Voice Activity Detection) in milliseconds. Once
the voice inactivity is detected, the gateway will wait for
this duration before activating silence suppression.
This attribute defines the hangover time for
VAD(Voice Activity Detection) in milliseconds. Once
the voice inactivity is detected, the gateway will wait for
this duration before activating silence suppression.
Parsed from file CISCO-VISM-MODULE-MIB.my.txt
Company: None
Module: CISCO-VISM-MODULE-MIB
This attribute defines the hangover time for
VAD(Voice Activity Detection) in milliseconds. Once
the voice inactivity is detected, the gateway will wait for
this duration before activating silence suppression.
vismVoIpVADTimer OBJECT-TYPE SYNTAX INTEGER(250..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the hangover time for VAD in milliseconds. Once the voice inactivity is detected, the gateway will wait for this duration before activating silence suppression. The value in this object will be utilized when the Call Agent does not specify this. " DEFVAL { 250 } ::= {vismVoIpGrp 8}
vismVoIpVADTimer OBJECT-TYPE SYNTAX INTEGER(250..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the hangover time for VAD(Voice Activity Detection) in milliseconds. Once the voice inactivity is detected, the gateway will wait for this duration before activating silence suppression. " DEFVAL { 250 } ::= { vismVoIpGrp 8 }
Vendor: Stratacom
Module: CISCO-VISM-MODULE-MIB
[Automatically extracted from oidview.com]
vismVoIpVADTimer OBJECT-TYPE SYNTAX Integer32(250..65535) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the hangover time for VAD(Voice Activity Detection) in milliseconds. Once the voice inactivity is detected, the gateway will wait for this duration before activating silence suppression. " DEFVAL { 250 } ::= { vismVoIpGrp 8 }
vismVoIpVADTimer OBJECT-TYPE SYNTAX Integer32(250..65535) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute defines the hangover time for VAD(Voice Activity Detection) in milliseconds. Once the voice inactivity is detected, the gateway will wait for this duration before activating silence suppression. " DEFVAL { 250 } ::= { vismVoIpGrp 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.3.17.2.8.0 | vismVoIpVADTimer | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.3.17.2.1 | vismBearerTos | 1 | 1 | This object is used to provision the bitmask used for the TOS (Type Of Service) octet for cells carrying VoIP bearer (RTP ) traff… |
1.3.6.1.4.1.351.110.3.17.2.2 | vismRtcpRepInterval | 1 | 1 | This attribute defines the RTCP(Real-time Transport Control Protocol) report interval (defined in RFC 1889). This indicates the i… |
1.3.6.1.4.1.351.110.3.17.2.3 | vismRtpReceiveTimer | 1 | 1 | This object defines whether the RTP packets receive timer on the VISM needs to be enabled or not. For some VoIP applications if a… |
1.3.6.1.4.1.351.110.3.17.2.4 | vismPacketizationPeriod | 1 | 1 | This object is used to provision the packetization period to be applied and is applicable for VoIP only. For VoAAL2 adaptations, … |
1.3.6.1.4.1.351.110.3.17.2.5 | vismVoIpDtmfRelay | 1 | 1 | This attribute defines whether the DTMF (Dual Tone Multi-Frequency) digits need to be transported to the other endpoint via NSE(Na… |
1.3.6.1.4.1.351.110.3.17.2.6 | vismVoIpCasTransport | 1 | 1 | This attribute defines whether the CAS(Channel Associated Signaling) bits need to be transported to the other endpoint via NSE pa… |
1.3.6.1.4.1.351.110.3.17.2.7 | vismVoIpTripleRedundancy | 1 | 1 | This attribute defines whether triple redundancy is enabled or not. With triple redundancy, NSEs are sent three times at 20 ms in… |
1.3.6.1.4.1.351.110.3.17.2.9 | vismVoIpNTECapabilityNegotiate | 1 | 1 | This attribute defines whether the VISM has the capability to negotiate the list of events either NSE or NTE(Named Telephony Even… |
1.3.6.1.4.1.351.110.3.17.2.10 | vismVoIpSIDPayloadType | 1 | 1 | This attribute sets the payload type of a RTP packet carrying SID(Silence Insertion Descriptor) which is sent to the other end wh… |
1.3.6.1.4.1.351.110.3.17.2.11 | vismVoIpDPvcOamCellGap | 1 | 1 | This attribute defines the inter cell gap for dual PVC OAM cells. The value represents the time in milliseconds. |
1.3.6.1.4.1.351.110.3.17.2.12 | vismVoIpDPvcRetryCnt | 1 | 1 | This attribute defines the threshold for failure of a PVC. If the number of consecutive OAM cells sent for which no ack was rece… |
1.3.6.1.4.1.351.110.3.17.2.13 | vismVoIpDPvcRecoverCnt | 1 | 1 | This attribute defines the threshold for recovery of a PVC. If the number of consecutive OAM cells sent for which ack was receiv… |
1.3.6.1.4.1.351.110.3.17.2.14 | vismRtcpRecvMultiplier | 1 | 1 | The object vismRtcpRepInterval specified above defines an approximate RTCP report interval (defined in RFC 1889) which indicates … |
1.3.6.1.4.1.351.110.3.17.2.15 | vismVoIpLapdTrunkPVC | 1 | 1 | This object should be used for VoIP Trunking applications and only if the signalling type is configured to be CCS. By default th… |
1.3.6.1.4.1.351.110.3.17.2.16 | vismVoIpEventNegotiationPolicy | 1 | 1 | This attribute defines whether or not the VISM should advertise the event codecs, NSE, NTE, or Cisco-rtp, in addition to the list… |