Minimum cell rate.(in cells per sec.)
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
Minimum cell rate.(in cells per sec.).
Minimum cell rate.(in cells per sec.).
Parsed from file CISCO-MGX82XX-RPM-CONN-MIB.my.txt
Company: None
Module: CISCO-MGX82XX-RPM-CONN-MIB
Minimum cell rate.(in cells per sec.).
rpmChanMCR OBJECT-TYPE SYNTAX INTEGER (0..353208) ACCESS read-only STATUS mandatory DESCRIPTION " Minimum cell rate.(in cells per sec.) " ::= { rpmChanGrpEntry 24 }
rpmChanMCR OBJECT-TYPE SYNTAX INTEGER(0..353208) ACCESS read-only STATUS mandatory DESCRIPTION "Minimum cell rate.(in cells per sec.)." ::= { rpmChanGrpEntry 24 }
Vendor: Stratacom
Module: CISCO-WAN-AXIPOP-MIB
[Automatically extracted from oidview.com]
rpmChanMCR OBJECT-TYPE SYNTAX Integer32 (0..353208) UNITS "cells-per-second" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum cell rate.(in cells per sec.)." ::= { rpmChanGrpEntry 24 }
rpmChanMCR OBJECT-TYPE SYNTAX Integer32 (0..353208) UNITS "cells-per-second" MAX-ACCESS read-only STATUS current DESCRIPTION "Minimum cell rate.(in cells per sec.)." ::= { rpmChanGrpEntry 24 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.1 | rpmChanSlotNum | 0 | 0 | Specifies the slot number of the RPM card. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.2 | rpmChanInterface | 0 | 0 | This is the RPM's backplane interface. Currently there is only one interface. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.3 | rpmChanNum | 0 | 0 | This is the LCN. A unique number which identifies a connection. LCN maps VPI and VCI. For VCC, VCI range is 1..3825, and LCN rang… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.4 | rpmChanRowStatus | 0 | 0 | This indicates the status of this channel. 1 ==> ADD 2 ==> DELETE 3 ==> MODIFY |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.5 | rpmChanVcd | 0 | 0 | Virtual Circuit Descriptor. A unique number which identifies a connection. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.6 | rpmChanVpi | 0 | 0 | The VPI value for this channel. For VPC, VPI range is 1..255 and LCN range is 3841..4095. LCN = VPI + 3840 |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.7 | rpmChanVci | 0 | 0 | The VCI value for this channel. For VCC, VCI range is 1..3825, and LCN range is 16..3840. LCN = VCI + 16. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.8 | rpmChanSubInterface | 0 | 0 | This is the RPM's backplane sub-interface. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.9 | rpmChanLocalVpi | 0 | 0 | This VPI together with the local VCI and NSAP represents the local end point in this connection. The VPI value is zero if it is a… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.10 | rpmChanLocalVci | 0 | 0 | This VCI together with the local VPI and NSAP represents the local end point in this connection. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.11 | rpmChanLocalNsap | 0 | 0 | This object identifies the local NSAP address. The bytes are mapped as follows: prefix : 13 bytes Cisco ID : 2 bytes Reserved … |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.12 | rpmChanRemoteVpi | 0 | 0 | This VPI together with the remote VCI and NSAP represents the remote end point in this connection. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.13 | rpmChanRemoteVci | 0 | 0 | This VCI together with the remote VPI and NSAP represents the remote end point in this connection. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.14 | rpmChanRemoteNsap | 0 | 0 | This object identifies the remote NSAP address. The bytes are mapped as follows: prefix : 13 bytes Cisco ID : 2 bytes Reserved … |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.15 | rpmChanType | 0 | 0 | This specifies the connection type 1 ==> SVC 2 ==> PVC 3 ==> Soft PVC Currently only PVC is supported. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.16 | rpmChanConnType | 0 | 0 | This specifies the connection type 1 ==> Virtual Path Connection 2 ==> Virtual Channel Connection |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.17 | rpmChanServiceType | 0 | 0 | This specifies the service type 1 ==> Constant Bit Rate 2 ==> Variable Bit Rate 4 ==> Unspecified Bit Rate 5 ==> ATM frame relay 6 =… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.18 | rpmChanMastership | 0 | 0 | This specifies which end of the connection is the master. This is used by PXM to determine if this end point is master or slave. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.19 | rpmChanRtePriority | 0 | 0 | This is also known as class of service, it is used by PXM to determine how important this connection is when selecting connection… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.20 | rpmChanMaxCost | 0 | 0 | Maximum allowed cost. It is related to Cost Based Routing. This is used by PXM so that it won't choose a path with a cost greater … |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.21 | rpmChanRestrictTrkType | 0 | 0 | Restricted trunk type for routing, used by PXM. It specifies that the connection either cannot be routed over satellite trunks or… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.22 | rpmChanPCR | 0 | 0 | Peak cell rate.(in cells per sec.) |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.23 | rpmChanRemotePCR | 0 | 0 | Peak cell rate of the other end, if not set, will be set to the same as local end PCR. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.25 | rpmChanRemoteMCR | 0 | 0 | Minimum cell rate of the other end, if not set, will be set to the same as local end MCR. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.26 | rpmChanPercentUtil | 0 | 0 | This is the expected long-term utilization of the channel by this end-point. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.27 | rpmChanRemotePercentUtil | 0 | 0 | This is the expected long-term utilization of the channel by the other end-point. If this is not specified in the connection setu… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.28 | rpmChanEncapType | 0 | 0 | ATM adaptation layer (AAL) and Encapsulation type. aal5snap - LLC/SNAP precedes the protocol datagram. aal34smds - Encapsulation … |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.29 | rpmChanMidLow | 0 | 0 | Starting Message Identifier Number for this PVC. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.30 | rpmChanMidHigh | 0 | 0 | Ending Message Identifier Number for this PVC. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.31 | rpmChanBurstSize | 0 | 0 | The Maximum number of ATM cells the virtual circuit can transmit. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.32 | rpmChanInArpFreq | 0 | 0 | Specifies how often (in minutes) Inverse ARP datagrams will be sent on this virtual circuit. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.33 | rpmChanOAMloopback | 0 | 0 | Specifies how often (in seconds) to generate an OAM F5 loopback cell from this virtual circuit. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.34 | rpmChanState | 0 | 0 | This indicates the status of this channel. 1 ==> notConfigured 2 ==> active 3 ==> failed. Currently 'failed' state is not supported… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.35 | rpmChanVirtualTemplate | 0 | 0 | Specifies the Virtual Template used for CISCO PPP. If it is not using Virtual Template then this value is zero. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.36 | rpmChanAbrRDF | 0 | 0 | This is valid only for ABR Service Type. Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.37 | rpmChanAbrRIF | 0 | 0 | This is valid only for ABR Service Type. Rate Increase Factor: Controls the rate increase which occurs when a backward RM-cell is … |