Specifies how often (in seconds) to generate an OAM F5
loopback cell from this virtual circuit.
Parsed from file CISCO-WAN-AXIPOP-MIB.mib
Module: CISCO-WAN-AXIPOP-MIB
This object specifies how often to generate
an OAM F5 loopback cell from this virtual circuit.
The value zero will disable generation of OAM F5
loopback cells.
This object specifies how often to generate
an OAM F5 loopback cell from this virtual circuit.
The value zero will disable generation of OAM F5
loopback cells.
Parsed from file CISCO-MGX82XX-RPM-CONN-MIB.my.txt
Company: None
Module: CISCO-MGX82XX-RPM-CONN-MIB
This object specifies how often to generate
an OAM F5 loopback cell from this virtual circuit.
The value zero will disable generation of OAM F5
loopback cells.
rpmChanOAMloopback OBJECT-TYPE SYNTAX INTEGER (0..600) ACCESS read-only STATUS mandatory DESCRIPTION " Specifies how often (in seconds) to generate an OAM F5 loopback cell from this virtual circuit. " ::= { rpmChanGrpEntry 33 }
rpmChanOAMloopback OBJECT-TYPE SYNTAX INTEGER(0..600) ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies how often to generate an OAM F5 loopback cell from this virtual circuit. The value zero will disable generation of OAM F5 loopback cells." ::= { rpmChanGrpEntry 33 }
Vendor: Stratacom
Module: CISCO-WAN-AXIPOP-MIB
[Automatically extracted from oidview.com]
rpmChanOAMloopback OBJECT-TYPE SYNTAX Integer32 (0..600) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies how often to generate an OAM F5 loopback cell from this virtual circuit. The value zero will disable generation of OAM F5 loopback cells." ::= { rpmChanGrpEntry 33 }
rpmChanOAMloopback OBJECT-TYPE SYNTAX Integer32 (0..600) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies how often to generate an OAM F5 loopback cell from this virtual circuit. The value zero will disable generation of OAM F5 loopback cells." ::= { rpmChanGrpEntry 33 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.1 | rpmChanSlotNum | 0 | 0 | Specifies the slot number of the RPM card. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.2 | rpmChanInterface | 0 | 0 | This is the RPM's backplane interface. Currently there is only one interface. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.3 | rpmChanNum | 0 | 0 | This is the LCN. A unique number which identifies a connection. LCN maps VPI and VCI. For VCC, VCI range is 1..3825, and LCN rang… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.4 | rpmChanRowStatus | 0 | 0 | This indicates the status of this channel. 1 ==> ADD 2 ==> DELETE 3 ==> MODIFY |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.5 | rpmChanVcd | 0 | 0 | Virtual Circuit Descriptor. A unique number which identifies a connection. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.6 | rpmChanVpi | 0 | 0 | The VPI value for this channel. For VPC, VPI range is 1..255 and LCN range is 3841..4095. LCN = VPI + 3840 |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.7 | rpmChanVci | 0 | 0 | The VCI value for this channel. For VCC, VCI range is 1..3825, and LCN range is 16..3840. LCN = VCI + 16. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.8 | rpmChanSubInterface | 0 | 0 | This is the RPM's backplane sub-interface. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.9 | rpmChanLocalVpi | 0 | 0 | This VPI together with the local VCI and NSAP represents the local end point in this connection. The VPI value is zero if it is a… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.10 | rpmChanLocalVci | 0 | 0 | This VCI together with the local VPI and NSAP represents the local end point in this connection. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.11 | rpmChanLocalNsap | 0 | 0 | This object identifies the local NSAP address. The bytes are mapped as follows: prefix : 13 bytes Cisco ID : 2 bytes Reserved … |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.12 | rpmChanRemoteVpi | 0 | 0 | This VPI together with the remote VCI and NSAP represents the remote end point in this connection. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.13 | rpmChanRemoteVci | 0 | 0 | This VCI together with the remote VPI and NSAP represents the remote end point in this connection. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.14 | rpmChanRemoteNsap | 0 | 0 | This object identifies the remote NSAP address. The bytes are mapped as follows: prefix : 13 bytes Cisco ID : 2 bytes Reserved … |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.15 | rpmChanType | 0 | 0 | This specifies the connection type 1 ==> SVC 2 ==> PVC 3 ==> Soft PVC Currently only PVC is supported. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.16 | rpmChanConnType | 0 | 0 | This specifies the connection type 1 ==> Virtual Path Connection 2 ==> Virtual Channel Connection |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.17 | rpmChanServiceType | 0 | 0 | This specifies the service type 1 ==> Constant Bit Rate 2 ==> Variable Bit Rate 4 ==> Unspecified Bit Rate 5 ==> ATM frame relay 6 =… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.18 | rpmChanMastership | 0 | 0 | This specifies which end of the connection is the master. This is used by PXM to determine if this end point is master or slave. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.19 | rpmChanRtePriority | 0 | 0 | This is also known as class of service, it is used by PXM to determine how important this connection is when selecting connection… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.20 | rpmChanMaxCost | 0 | 0 | Maximum allowed cost. It is related to Cost Based Routing. This is used by PXM so that it won't choose a path with a cost greater … |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.21 | rpmChanRestrictTrkType | 0 | 0 | Restricted trunk type for routing, used by PXM. It specifies that the connection either cannot be routed over satellite trunks or… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.22 | rpmChanPCR | 0 | 0 | Peak cell rate.(in cells per sec.) |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.23 | rpmChanRemotePCR | 0 | 0 | Peak cell rate of the other end, if not set, will be set to the same as local end PCR. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.24 | rpmChanMCR | 0 | 0 | Minimum cell rate.(in cells per sec.). |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.25 | rpmChanRemoteMCR | 0 | 0 | Minimum cell rate of the other end, if not set, will be set to the same as local end MCR. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.26 | rpmChanPercentUtil | 0 | 0 | This is the expected long-term utilization of the channel by this end-point. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.27 | rpmChanRemotePercentUtil | 0 | 0 | This is the expected long-term utilization of the channel by the other end-point. If this is not specified in the connection setu… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.28 | rpmChanEncapType | 0 | 0 | ATM adaptation layer (AAL) and Encapsulation type. aal5snap - LLC/SNAP precedes the protocol datagram. aal34smds - Encapsulation … |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.29 | rpmChanMidLow | 0 | 0 | Starting Message Identifier Number for this PVC. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.30 | rpmChanMidHigh | 0 | 0 | Ending Message Identifier Number for this PVC. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.31 | rpmChanBurstSize | 0 | 0 | The Maximum number of ATM cells the virtual circuit can transmit. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.32 | rpmChanInArpFreq | 0 | 0 | Specifies how often (in minutes) Inverse ARP datagrams will be sent on this virtual circuit. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.34 | rpmChanState | 0 | 0 | This indicates the status of this channel. 1 ==> notConfigured 2 ==> active 3 ==> failed. Currently 'failed' state is not supported… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.35 | rpmChanVirtualTemplate | 0 | 0 | Specifies the Virtual Template used for CISCO PPP. If it is not using Virtual Template then this value is zero. |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.36 | rpmChanAbrRDF | 0 | 0 | This is valid only for ABR Service Type. Rate Decrease Factor: Controls the rate decrease which occurs when backward RM-cells with… |
| 1.3.6.1.4.1.351.110.5.2.10.1.1.1.37 | rpmChanAbrRIF | 0 | 0 | This is valid only for ABR Service Type. Rate Increase Factor: Controls the rate increase which occurs when a backward RM-cell is … |