The value of this object is always set to 'voIP'.
It indicates that network port. The same value
is used even when VISM supports VoAAL1 or VoAAL2.
Parsed from file CISCO-VISM-PORT-MIB.mib
Module: CISCO-VISM-PORT-MIB
The value of this object is always set to 'voIP'.
It indicates that network port. The same value
is used even when VISM supports VoAAL1 or VoAAL2.
The value of this object is always set to 'voIP'.
It indicates that network port. The same value
is used even when VISM supports VoAAL1 or VoAAL2.
Parsed from file CISCO-VISM-PORT-MIB.my.txt
Company: None
Module: CISCO-VISM-PORT-MIB
The value of this object is always set to 'voIP'.
It indicates that network port. The same value
is used even when VISM supports VoAAL1 or VoAAL2.
vismPortType OBJECT-TYPE SYNTAX INTEGER { voIP (1), userPort (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object is always set to 'voIP'. It indicates that network port. The same value is used even when VISM supports VoAAL1 or VoAAL2. " DEFVAL { voIP } ::= { vismPortCnfGrpEntry 4 }
vismPortType OBJECT-TYPE SYNTAX INTEGER { voIP(1), userPort(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The value of this object is always set to 'voIP'. It indicates that network port. The same value is used even when VISM supports VoAAL1 or VoAAL2. " DEFVAL { voIP } ::= { vismPortCnfGrpEntry 4 }
Vendor: Stratacom
Module: CISCO-WAN-AXIPOP-MIB
[Automatically extracted from oidview.com]
vismPortType OBJECT-TYPE SYNTAX INTEGER { voIP (1), userPort (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object is always set to 'voIP'. It indicates that network port. The same value is used even when VISM supports VoAAL1 or VoAAL2. " DEFVAL { voIP } ::= { vismPortCnfGrpEntry 4 }
vismPortType OBJECT-TYPE SYNTAX INTEGER { voIP (1), userPort (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of this object is always set to 'voIP'. It indicates that network port. The same value is used even when VISM supports VoAAL1 or VoAAL2. " DEFVAL { voIP } ::= { vismPortCnfGrpEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.351.110.5.5.2.1.1.1.1 | vismPortNum | 0 | 0 | This is a logical port number. If PXM1 (Processor Switch Module) is the PXM used on the shelf this object should be set to 1. For … |
1.3.6.1.4.1.351.110.5.5.2.1.1.1.2 | vismPortRowStatus | 0 | 0 | The object add, delete or modify a port. 'add' - add a port, a port acn only be added if the status is in 'del'. 'del' - delete a… |
1.3.6.1.4.1.351.110.5.5.2.1.1.1.3 | vismPortLineNum | 0 | 0 | This represents the line number to which this port is associated. Since the network port is not associated with any line, line nu… |
1.3.6.1.4.1.351.110.5.5.2.1.1.1.5 | vismPortDs0ConfigBitMap | 0 | 0 | This respesents the bit map of DS0s which is used to create this port. Bit 0 represents DS0-1. Since this object is not applicab… |
1.3.6.1.4.1.351.110.5.5.2.1.1.1.6 | vismPortSpeed | 0 | 0 | The speed of the port in cells per second. It is used by VISM card to advertise virtual port bandwidth to the controller, SVC(Swi… |
1.3.6.1.4.1.351.110.5.5.2.1.1.1.7 | vismPortState | 0 | 0 | This object indicates the state of the port. |