This identifies the user who wants to do a SET operation
on this group. This will be compared against bertOwner
and access will be given only if it matches. Hence, for
every SET request, this object should have a valid value.
If the user is a CLI user, then this is username.
If it is SNMP Manager, then this would be the IP address.
For example, this value can be, 192.9.209.157 within quotes.
Required for bert operations.
Parsed from file CISCO-WAN-SRM-BERT-MIB.mib
Module: CISCO-WAN-SRM-BERT-MIB
This identifies the user who wants to do a SET operation
on this group. This will be compared against bertOwner
and access will be given only if it matches. Hence, for
every SET request, this object should have a valid value.
If the user is a CLI user, then this is username.
If it is SNMP Manager, then this would be the IP address.
For example, this value can be, 192.9.209.157 within quotes.
Required for bert operations.
This identifies the user who wants to do a SET operation
on this group. This will be compared against bertOwner
and access will be given only if it matches. Hence, for
every SET request, this object should have a valid value.
If the user is a CLI user, then this is username.
If it is SNMP Manager, then this would be the IP address.
For example, this value can be, 192.9.209.157 within quotes.
Required for bert operations.
Parsed from file CISCO-WAN-SRM-BERT-MIB.my.txt
Company: None
Module: CISCO-WAN-SRM-BERT-MIB
This identifies the user who wants to do a SET operation
on this group. This will be compared against bertOwner
and access will be given only if it matches. Hence, for
every SET request, this object should have a valid value.
If the user is a CLI user, then this is username.
If it is SNMP Manager, then this would be the IP address.
For example, this value can be, 192.9.209.157 within quotes.
Required for bert operations.
bertUserId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This identifies the user who wants to do a SET operation on this group. This will be compared against bertOwner and access will be given only if it matches. Hence, for every SET request, this object should have a valid value. If the user is a CLI user, then this is username. If it is SNMP Manager, then this would be the IP address. For example, this value can be, 192.9.209.157 within quotes. Required for bert operations." ::= { bert 4 }
bertUserId OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "This identifies the user who wants to do a SET operation on this group. This will be compared against bertOwner and access will be given only if it matches. Hence, for every SET request, this object should have a valid value. If the user is a CLI user, then this is username. If it is SNMP Manager, then this would be the IP address. For example, this value can be, 192.9.209.157 within quotes. Required for bert operations." ::= { bert 4 }
Vendor: Stratacom
Module: CISCO-WAN-AXIPOP-MIB
[Automatically extracted from oidview.com]
bertUserId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This identifies the user who wants to do a SET operation on this group. This will be compared against bertOwner and access will be given only if it matches. Hence, for every SET request, this object should have a valid value. If the user is a CLI user, then this is username. If it is SNMP Manager, then this would be the IP address. For example, this value can be, 192.9.209.157 within quotes. Required for bert operations." ::= { bert 4 }
bertUserId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This identifies the user who wants to do a SET operation on this group. This will be compared against bertOwner and access will be given only if it matches. Hence, for every SET request, this object should have a valid value. If the user is a CLI user, then this is username. If it is SNMP Manager, then this would be the IP address. For example, this value can be, 192.9.209.157 within quotes. Required for bert operations." ::= { bert 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.6.1.4.0 | bertUserId | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.6.1.1 | bertControl | 1 | 1 | This object controls all the SET operations on this MIB group. acquireBert : Acquire BERT resources. cnfBert : Configure th… |
| 1.3.6.1.4.1.351.110.6.1.2 | bertResourceStatus | 1 | 1 | All of bert resources can be used by only one user at a time. This gives the status of the resources. |
| 1.3.6.1.4.1.351.110.6.1.3 | bertOwner | 1 | 1 | This refers to the user who owns the BERT resources. If the user is a CLI user, then this is username. If it is SNMP Manager(For … |
| 1.3.6.1.4.1.351.110.6.1.5 | bertStatus | 1 | 1 | This variable provides the status of BERT in the shelf. |
| 1.3.6.1.4.1.351.110.6.1.6 | bertSlotNumber | 1 | 1 | specifies the physical slot number of the Service Module which is to run BERT For MGX 8220, the range is 5-14. For MGX 8850, the r… |
| 1.3.6.1.4.1.351.110.6.1.7 | bertTestMedium | 1 | 1 | specifies whether the bert is to test a port or an entire T1/E1 line. No default value for this, it has to be set if bert is confi… |
| 1.3.6.1.4.1.351.110.6.1.8 | bertPort | 1 | 1 | specifies the port number for BERT. |
| 1.3.6.1.4.1.351.110.6.1.9 | bertLine | 1 | 1 | specifies the line number for BERT. If the test medium is port, this represents the line to which the port belongs. |
| 1.3.6.1.4.1.351.110.6.1.10 | bertMode | 1 | 1 | specifies the mode, the BERT module is to be configured for. |
| 1.3.6.1.4.1.351.110.6.1.11 | bertDeviceToLoop | 1 | 1 | This shows the type of the end device and the type of the loopback used (latching/nonlatching/polynomial). |
| 1.3.6.1.4.1.351.110.6.1.12 | bertDS0DPIterationCount | 1 | 1 | The Iteration Register needs to be programmed in SRM when DSO drop loop option is selected in bertDeviceToLoop. The value to be p… |
| 1.3.6.1.4.1.351.110.6.1.13 | bertPattern | 1 | 1 | This variable determines BERT pattern to be transmitted. |
| 1.3.6.1.4.1.351.110.6.1.14 | bertLoopback | 1 | 1 | specifies the type of loopback to be (d)established. |
| 1.3.6.1.4.1.351.110.6.1.15 | bertLoopbackOperation | 1 | 1 | specifies the operation of loopback (up or down). |
| 1.3.6.1.4.1.351.110.6.1.16 | bertDS0Speed | 1 | 1 | represents the ds0 speed of the test running. |
| 1.3.6.1.4.1.351.110.6.1.17 | bertTimeSlots | 1 | 1 | represents the number of ds0s in the test medium chosen. |
| 1.3.6.1.4.1.351.110.6.1.18 | bertStartTime | 1 | 1 | The syntax is hh:mm:ss The time zone is as configured in the shelf. |
| 1.3.6.1.4.1.351.110.6.1.19 | bertStartDate | 1 | 1 | On MGX 8220, the syntax is mm/dd/yy On MGX 8850, the syntax is mm/dd/yyyy. |
| 1.3.6.1.4.1.351.110.6.1.20 | bertBitCount | 1 | 1 | This shows the number of bits transmitted. |
| 1.3.6.1.4.1.351.110.6.1.21 | bertBitErrorCount | 1 | 1 | This shows the number of bits received in error. |
| 1.3.6.1.4.1.351.110.6.1.22 | bertErrorInjectCount | 1 | 1 | This shows the number of times error was injected. |
| 1.3.6.1.4.1.351.110.6.1.23 | bertCleanupAction | 1 | 1 | When the BERT has to be stopped or aborted (due to card state changes), this object would give the exact action to take. The bert… |
| 1.3.6.1.4.1.351.110.6.1.24 | bertAbortReason | 1 | 1 | when the BERT is aborted, this object would give the reason for that. |
| 1.3.6.1.4.1.351.110.6.1.25 | bertDDSSeekResultsTableFirstIndex | 1 | 1 | Denotes the index of the oldest entry in the table. A value of zero means that there are no entries in the table. |
| 1.3.6.1.4.1.351.110.6.1.26 | bertDDSSeekResultsTableLastIndex | 1 | 1 | Denotes the index of the latest entry in the table. A value of zero means that there are no entries in the table. |
| 1.3.6.1.4.1.351.110.6.1.27 | bertDDSSeekResultsTable | 1 | 3 | This table contains all available DDS patterns detected and latched by an interaface(lines,ports etc) configured to detect DDS pa… |
| 1.3.6.1.4.1.351.110.6.1.28 | bertSupportedTestsTable | 1 | 9 | A list of supported tests for a given SM. |