bert OBJECT IDENTIFIER ::= { axisDiagnostics 1 }
bert OBJECT IDENTIFIER ::= { axisDiagnostics 1 }
Vendor: Stratacom
Module: CISCO-WAN-AXIPOP-MIB
[Automatically extracted from oidview.com]
bert OBJECT IDENTIFIER ::= { axisDiagnostics 1 }
bert OBJECT IDENTIFIER ::= { axisDiagnostics 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.6.1.1 | bertControl | 1 | 1 | This object controls all the SET operations on this MIB group. acquireBert : Acquire BERT resources. cnfBert : Configure th… |
| 1.3.6.1.4.1.351.110.6.1.2 | bertResourceStatus | 1 | 1 | All of bert resources can be used by only one user at a time. This gives the status of the resources. |
| 1.3.6.1.4.1.351.110.6.1.3 | bertOwner | 1 | 1 | This refers to the user who owns the BERT resources. If the user is a CLI user, then this is username. If it is SNMP Manager(For … |
| 1.3.6.1.4.1.351.110.6.1.4 | bertUserId | 1 | 1 | This identifies the user who wants to do a SET operation on this group. This will be compared against bertOwner and access will b… |
| 1.3.6.1.4.1.351.110.6.1.5 | bertStatus | 1 | 1 | This variable provides the status of BERT in the shelf. |
| 1.3.6.1.4.1.351.110.6.1.6 | bertSlotNumber | 1 | 1 | specifies the physical slot number of the Service Module which is to run BERT For MGX 8220, the range is 5-14. For MGX 8850, the r… |
| 1.3.6.1.4.1.351.110.6.1.7 | bertTestMedium | 1 | 1 | specifies whether the bert is to test a port or an entire T1/E1 line. No default value for this, it has to be set if bert is confi… |
| 1.3.6.1.4.1.351.110.6.1.8 | bertPort | 1 | 1 | specifies the port number for BERT. |
| 1.3.6.1.4.1.351.110.6.1.9 | bertLine | 1 | 1 | specifies the line number for BERT. If the test medium is port, this represents the line to which the port belongs. |
| 1.3.6.1.4.1.351.110.6.1.10 | bertMode | 1 | 1 | specifies the mode, the BERT module is to be configured for. |
| 1.3.6.1.4.1.351.110.6.1.11 | bertDeviceToLoop | 1 | 1 | This shows the type of the end device and the type of the loopback used (latching/nonlatching/polynomial). |
| 1.3.6.1.4.1.351.110.6.1.12 | bertDS0DPIterationCount | 1 | 1 | The Iteration Register needs to be programmed in SRM when DSO drop loop option is selected in bertDeviceToLoop. The value to be p… |
| 1.3.6.1.4.1.351.110.6.1.13 | bertPattern | 1 | 1 | This variable determines BERT pattern to be transmitted. |
| 1.3.6.1.4.1.351.110.6.1.14 | bertLoopback | 1 | 1 | specifies the type of loopback to be (d)established. |
| 1.3.6.1.4.1.351.110.6.1.15 | bertLoopbackOperation | 1 | 1 | specifies the operation of loopback (up or down). |
| 1.3.6.1.4.1.351.110.6.1.16 | bertDS0Speed | 1 | 1 | represents the ds0 speed of the test running. |
| 1.3.6.1.4.1.351.110.6.1.17 | bertTimeSlots | 1 | 1 | represents the number of ds0s in the test medium chosen. |
| 1.3.6.1.4.1.351.110.6.1.18 | bertStartTime | 1 | 1 | The syntax is hh:mm:ss The time zone is as configured in the shelf. |
| 1.3.6.1.4.1.351.110.6.1.19 | bertStartDate | 1 | 1 | On MGX 8220, the syntax is mm/dd/yy On MGX 8850, the syntax is mm/dd/yyyy. |
| 1.3.6.1.4.1.351.110.6.1.20 | bertBitCount | 1 | 1 | This shows the number of bits transmitted. |
| 1.3.6.1.4.1.351.110.6.1.21 | bertBitErrorCount | 1 | 1 | This shows the number of bits received in error. |
| 1.3.6.1.4.1.351.110.6.1.22 | bertErrorInjectCount | 1 | 1 | This shows the number of times error was injected. |
| 1.3.6.1.4.1.351.110.6.1.23 | bertCleanupAction | 1 | 1 | When the BERT has to be stopped or aborted (due to card state changes), this object would give the exact action to take. The bert… |
| 1.3.6.1.4.1.351.110.6.1.24 | bertAbortReason | 1 | 1 | when the BERT is aborted, this object would give the reason for that. |
| 1.3.6.1.4.1.351.110.6.1.25 | bertDDSSeekResultsTableFirstIndex | 1 | 1 | Denotes the index of the oldest entry in the table. A value of zero means that there are no entries in the table. |
| 1.3.6.1.4.1.351.110.6.1.26 | bertDDSSeekResultsTableLastIndex | 1 | 1 | Denotes the index of the latest entry in the table. A value of zero means that there are no entries in the table. |
| 1.3.6.1.4.1.351.110.6.1.27 | bertDDSSeekResultsTable | 1 | 3 | This table contains all available DDS patterns detected and latched by an interaface(lines,ports etc) configured to detect DDS pa… |
| 1.3.6.1.4.1.351.110.6.1.28 | bertSupportedTestsTable | 1 | 9 | A list of supported tests for a given SM. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.6.2 | rasDsk, dsx3bert | 20 | 40 | None |
| 1.3.6.1.4.1.351.110.6.3 | onlineDiagnostics | 3 | 6 | None |