This MIB is used for configuring/provisioning SPVCs on
the ATM interfaces. This is used for ATM switch
connection management.
Terminologies used:
GCRA - The Generic Cell Rate Algorithm(GCRA) is used to
define comformance with repect to the traffic
contract.For each cell arrival, the GCRA determines
whether the cell conforms to the traffic contract
of the connection.
PCR - The Peak Cell Rate(PCR) traffic parameter specifies
an upper bound on the rate at which traffic can
be submitted on an ATM connection.
SCR - Sustained Cell Rate.
MBS - Maximum Burst Size.
MCR - Minimum Cell Rate is the rate at which the source
is always allowed to send.
ACR - Allowed Cell Rate is the current rate at which
a source is allowed to send.
RDF - Rate Decrease Factor controls the decrease in the
cell transmission rate
CRM - Missing RM-cell count. CRM limits the number of
forward RM-cells which may be sent in the absence
of received backward RM-cells.
CDF - The Cutoff Decrease Factor controls the decrease
in ACR assoicated with the CRM.
CDVT - Cell Delay Transfer Variation Tolerance
CBR - The Constant Bit Rate(CBR) service category is used
by connections that request a static amount of
bandwidth that is continuously available during the
connection lifetime. This amount of bandwidth is
characterized by a PCR value.
rt-VBR - The real-time Variable Bit Rate(rt-VBR) service
category is intended for real-time applications,
i.e.,those requiring tightly constrainded delay
and delay variation, as would be appropriate for
voice and video applications.The rt-VBR connections
are characterized in terms of a PCR, SCR and MBS.
nrt-VBR - The non-real-time Variable Bit Rate(nrt-VBR)
service category is intended for non-real-time
applications which have bursty traffic
characteristics. The nrt-VBR is characterized
in terms of a PCR,SCR and MBS.
UBR - The Unspecified Bit Rate(UBR) service category is
intended for non-real-time applications,i.e.,those
not requiring tightly constrained delay and delay
variation. The UBR service does not specify traffic
related service gurantees. The UBR service is
indicated by use of the Best Effort Indicator in
ATM User Cell Rate Information element.
ABR - The Available Bit Rate(ABR) is an ATM layer
service category for which the limiting ATM layer
transfer characteristics provided by the network
may change subsequent to connection establishment.
CAC - The Connection Admission Control(CAC) function is
defined as the set of actions taken by the network
at SVC establishment or by network management during
PVC establishment in order to determine whether
a connection can be progressed or should be rejected.
UPC - Usage Parameter Control(UPC) is defined as the set
of actions taken by the network to monitor and
control traffic.
Parsed from file CISCO-WAN-ATM-CONN-MIB.mib
Module: CISCO-WAN-ATM-CONN-MIB
This MIB is used for configuring/provisioning SPVCs on
the ATM interfaces. This is used for ATM switch
connection management.
Terminologies used:
GCRA - The Generic Cell Rate Algorithm(GCRA) is used to
define comformance with repect to the traffic
contract.For each cell arrival, the GCRA determines
whether the cell conforms to the traffic contract
of the connection.
PCR - The Peak Cell Rate(PCR) traffic parameter specifies
an upper bound on the rate at which traffic can
be submitted on an ATM connection.
SCR - Sustained Cell Rate.
MBS - Maximum Burst Size.
MCR - Minimum Cell Rate is the rate at which the source
is always allowed to send.
ACR - Allowed Cell Rate is the current rate at which
a source is allowed to send.
RDF - Rate Decrease Factor controls the decrease in the
cell transmission rate
CRM - Missing RM-cell count. CRM limits the number of
forward RM-cells which may be sent in the absence
of received backward RM-cells.
CDF - The Cutoff Decrease Factor controls the decrease
in ACR assoicated with the CRM.
CDVT - Cell Delay Transfer Variation Tolerance
CBR - The Constant Bit Rate(CBR) service category is used
by connections that request a static amount of
bandwidth that is continuously available during the
connection lifetime. This amount of bandwidth is
characterized by a PCR value.
rt-VBR - The real-time Variable Bit Rate(rt-VBR) service
category is intended for real-time applications,
i.e.,those requiring tightly constrainded delay
and delay variation, as would be appropriate for
voice and video applications.The rt-VBR connections
are characterized in terms of a PCR, SCR and MBS.
nrt-VBR - The non-real-time Variable Bit Rate(nrt-VBR)
service category is intended for non-real-time
applications which have bursty traffic
characteristics. The nrt-VBR is characterized
in terms of a PCR,SCR and MBS.
UBR - The Unspecified Bit Rate(UBR) service category is
intended for non-real-time applications,i.e.,those
not requiring tightly constrained delay and delay
variation. The UBR service does not specify traffic
related service gurantees. The UBR service is
indicated by use of the Best Effort Indicator in
ATM User Cell Rate Information element.
ABR - The Available Bit Rate(ABR) is an ATM layer
service category for which the limiting ATM layer
transfer characteristics provided by the network
may change subsequent to connection establishment.
CAC - The Connection Admission Control(CAC) function is
defined as the set of actions taken by the network
at SVC establishment or by network management during
PVC establishment in order to determine whether
a connection can be progressed or should be rejected.
UPC - Usage Parameter Control(UPC) is defined as the set
of actions taken by the network to monitor and
control traffic.
Parsed from file CISCO-WAN-ATM-CONN-MIB.my.txt
Company: None
Module: CISCO-WAN-ATM-CONN-MIB
This MIB is used for configuring/provisioning SPVCs on
the ATM interfaces. This is used for ATM switch
connection management.
Terminologies used:
GCRA - The Generic Cell Rate Algorithm(GCRA) is used to
define comformance with repect to the traffic
contract.For each cell arrival, the GCRA determines
whether the cell conforms to the traffic contract
of the connection.
PCR - The Peak Cell Rate(PCR) traffic parameter specifies
an upper bound on the rate at which traffic can
be submitted on an ATM connection.
SCR - Sustained Cell Rate.
MBS - Maximum Burst Size.
MCR - Minimum Cell Rate is the rate at which the source
is always allowed to send.
ACR - Allowed Cell Rate is the current rate at which
a source is allowed to send.
RDF - Rate Decrease Factor controls the decrease in the
cell transmission rate
CRM - Missing RM-cell count. CRM limits the number of
forward RM-cells which may be sent in the absence
of received backward RM-cells.
CDF - The Cutoff Decrease Factor controls the decrease
in ACR assoicated with the CRM.
CDVT - Cell Delay Transfer Variation Tolerance
CBR - The Constant Bit Rate(CBR) service category is used
by connections that request a static amount of
bandwidth that is continuously available during the
connection lifetime. This amount of bandwidth is
characterized by a PCR value.
rt-VBR - The real-time Variable Bit Rate(rt-VBR) service
category is intended for real-time applications,
i.e.,those requiring tightly constrainded delay
and delay variation, as would be appropriate for
voice and video applications.The rt-VBR connections
are characterized in terms of a PCR, SCR and MBS.
nrt-VBR - The non-real-time Variable Bit Rate(nrt-VBR)
service category is intended for non-real-time
applications which have bursty traffic
characteristics. The nrt-VBR is characterized
in terms of a PCR,SCR and MBS.
UBR - The Unspecified Bit Rate(UBR) service category is
intended for non-real-time applications,i.e.,those
not requiring tightly constrained delay and delay
variation. The UBR service does not specify traffic
related service gurantees. The UBR service is
indicated by use of the Best Effort Indicator in
ATM User Cell Rate Information element.
ABR - The Available Bit Rate(ABR) is an ATM layer
service category for which the limiting ATM layer
transfer characteristics provided by the network
may change subsequent to connection establishment.
CAC - The Connection Admission Control(CAC) function is
defined as the set of actions taken by the network
at SVC establishment or by network management during
PVC establishment in order to determine whether
a connection can be progressed or should be rejected.
UPC - Usage Parameter Control(UPC) is defined as the set
of actions taken by the network to monitor and
control traffic.
ciscoWanAtmConnMIB MODULE-IDENTITY LAST-UPDATED "200303300000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB is used for configuring/provisioning SPVCs on the ATM interfaces. This is used for ATM switch connection management. Terminologies used: GCRA - The Generic Cell Rate Algorithm(GCRA) is used to define comformance with repect to the traffic contract.For each cell arrival, the GCRA determines whether the cell conforms to the traffic contract of the connection. PCR - The Peak Cell Rate(PCR) traffic parameter specifies an upper bound on the rate at which traffic can be submitted on an ATM connection. SCR - Sustained Cell Rate. MBS - Maximum Burst Size. MCR - Minimum Cell Rate is the rate at which the source is always allowed to send. ACR - Allowed Cell Rate is the current rate at which a source is allowed to send. RDF - Rate Decrease Factor controls the decrease in the cell transmission rate CRM - Missing RM-cell count. CRM limits the number of forward RM-cells which may be sent in the absence of received backward RM-cells. CDF - The Cutoff Decrease Factor controls the decrease in ACR assoicated with the CRM. CDVT - Cell Delay Transfer Variation Tolerance CBR - The Constant Bit Rate(CBR) service category is used by connections that request a static amount of bandwidth that is continuously available during the connection lifetime. This amount of bandwidth is characterized by a PCR value. rt-VBR - The real-time Variable Bit Rate(rt-VBR) service category is intended for real-time applications, i.e.,those requiring tightly constrainded delay and delay variation, as would be appropriate for voice and video applications.The rt-VBR connections are characterized in terms of a PCR, SCR and MBS. nrt-VBR - The non-real-time Variable Bit Rate(nrt-VBR) service category is intended for non-real-time applications which have bursty traffic characteristics. The nrt-VBR is characterized in terms of a PCR,SCR and MBS. UBR - The Unspecified Bit Rate(UBR) service category is intended for non-real-time applications,i.e.,those not requiring tightly constrained delay and delay variation. The UBR service does not specify traffic related service gurantees. The UBR service is indicated by use of the Best Effort Indicator in ATM User Cell Rate Information element. ABR - The Available Bit Rate(ABR) is an ATM layer service category for which the limiting ATM layer transfer characteristics provided by the network may change subsequent to connection establishment. CAC - The Connection Admission Control(CAC) function is defined as the set of actions taken by the network at SVC establishment or by network management during PVC establishment in order to determine whether a connection can be progressed or should be rejected. UPC - Usage Parameter Control(UPC) is defined as the set of actions taken by the network to monitor and control traffic. " REVISION "200303300000Z" DESCRIPTION "a) MAX-ACCESS clauses of objects in cwAtmChanTestTable are changed from read-create to read-write since this table does not have RowStaus object. " REVISION "200209180000Z" DESCRIPTION "a) Added following objects in cwAtmChanCnfgTable: cwaChanP2MP b) The DESCRIPTION of following objects are updated as a result of adding 'cwaChanP2MP' object: 'cwaChanRemoteVpi', 'cwaChanRemoteVci', 'cwaChanRemoteNSAPAddr', 'cwaChanRemotePCR', 'cwaChanRemoteMCR', 'cwaChanRemoteSCR', 'cwaChanRemoteCDV', 'cwaChanRemoteCTD', 'cwaChanRemoteMBS', 'cwaChanRemoteCDVT', 'cwaChanRemotePercentUtil', 'cwaChanRemoteCLR' and 'cwaChanSlaveType' c) Importing Unsigned32 from SNMPv2-SMI. d) Added 'cwGlobalChanDataTable' Table. e) Added following objects in cwAtmChanCnfgTable: cwaChanPrefRouteId cwaChanDirectRoute " REVISION "200203240000Z" DESCRIPTION "a) Added following objects in cwAtmChanCnfgTable: cwaChanSlaveType cwaChanRoutingPriority. b) Added following objects under cwAtmChanInformation: cwaChanNumVPCsInAlarm cwaChanNumVCCsInAlarm. c) Clarified the ifIndex usage in DESCRIPTION of cwAtmChanCnfgEntry. d) Updated the DESCRIPTION of following objects: cwaChanServiceCategory cwaChanVpcFlag cwaChanIdentifier cwaChanRowStatus e) Modified the range from 0..100 to 1..100 for following objects: cwaChanPercentUtil cwaChanRemotePercentUtil. f) Deprecated following objects: cwaChanAbrERS cwaChanAisIWCapability " REVISION "200102090000Z" DESCRIPTION "Update description for cwaChanVpcFlag, cwaChanStatsEnable, cwaChanRoutingMastership, and cwaChanAbrVSVDEnable" REVISION "200101030000Z" DESCRIPTION "Change description to indicate that cwaChanCDV, cwaChanCTD, cwaChanRemoteCDV, cwaChanRemoteCTD and cwaChanMaxCost parameters cannot be set on a slave endpoint." REVISION "200011150000Z" DESCRIPTION "Added cwaChanOamSegEpEnable object in cwAtmChanCnfgTable." REVISION "200007170000Z" DESCRIPTION "Deprecated object cwaChanRemoteCDVT" REVISION "200006190000Z" DESCRIPTION "Initial version of the MIB" ::= { ciscoWan 1 }
ciscoWanAtmConnMIB OBJECT IDENTIFIER ::= { ciscoWan 1 }
Vendor: Stratacom
Module: CISCO-WAN-ATM-CONN-MIB
[Automatically extracted from oidview.com]
ciscoWanAtmConnMIB MODULE-IDENTITY LAST-UPDATED "200303300000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB is used for configuring/provisioning SPVCs on the ATM interfaces. This is used for ATM switch connection management. Terminologies used: GCRA - The Generic Cell Rate Algorithm(GCRA) is used to define comformance with repect to the traffic contract.For each cell arrival, the GCRA determines whether the cell conforms to the traffic contract of the connection. PCR - The Peak Cell Rate(PCR) traffic parameter specifies an upper bound on the rate at which traffic can be submitted on an ATM connection. SCR - Sustained Cell Rate. MBS - Maximum Burst Size. MCR - Minimum Cell Rate is the rate at which the source is always allowed to send. ACR - Allowed Cell Rate is the current rate at which a source is allowed to send. RDF - Rate Decrease Factor controls the decrease in the cell transmission rate CRM - Missing RM-cell count. CRM limits the number of forward RM-cells which may be sent in the absence of received backward RM-cells. CDF - The Cutoff Decrease Factor controls the decrease in ACR assoicated with the CRM. CDVT - Cell Delay Transfer Variation Tolerance CBR - The Constant Bit Rate(CBR) service category is used by connections that request a static amount of bandwidth that is continuously available during the connection lifetime. This amount of bandwidth is characterized by a PCR value. rt-VBR - The real-time Variable Bit Rate(rt-VBR) service category is intended for real-time applications, i.e.,those requiring tightly constrainded delay and delay variation, as would be appropriate for voice and video applications.The rt-VBR connections are characterized in terms of a PCR, SCR and MBS. nrt-VBR - The non-real-time Variable Bit Rate(nrt-VBR) service category is intended for non-real-time applications which have bursty traffic characteristics. The nrt-VBR is characterized in terms of a PCR,SCR and MBS. UBR - The Unspecified Bit Rate(UBR) service category is intended for non-real-time applications,i.e.,those not requiring tightly constrained delay and delay variation. The UBR service does not specify traffic related service gurantees. The UBR service is indicated by use of the Best Effort Indicator in ATM User Cell Rate Information element. ABR - The Available Bit Rate(ABR) is an ATM layer service category for which the limiting ATM layer transfer characteristics provided by the network may change subsequent to connection establishment. CAC - The Connection Admission Control(CAC) function is defined as the set of actions taken by the network at SVC establishment or by network management during PVC establishment in order to determine whether a connection can be progressed or should be rejected. UPC - Usage Parameter Control(UPC) is defined as the set of actions taken by the network to monitor and control traffic. " REVISION "200303300000Z" DESCRIPTION "a) MAX-ACCESS clauses of objects in cwAtmChanTestTable are changed from read-create to read-write since this table does not have RowStaus object. " REVISION "200209180000Z" DESCRIPTION "a) Added following objects in cwAtmChanCnfgTable: cwaChanP2MP b) The DESCRIPTION of following objects are updated as a result of adding 'cwaChanP2MP' object: 'cwaChanRemoteVpi', 'cwaChanRemoteVci', 'cwaChanRemoteNSAPAddr', 'cwaChanRemotePCR', 'cwaChanRemoteMCR', 'cwaChanRemoteSCR', 'cwaChanRemoteCDV', 'cwaChanRemoteCTD', 'cwaChanRemoteMBS', 'cwaChanRemoteCDVT', 'cwaChanRemotePercentUtil', 'cwaChanRemoteCLR' and 'cwaChanSlaveType' c) Importing Unsigned32 from SNMPv2-SMI. d) Added 'cwGlobalChanDataTable' Table. e) Added following objects in cwAtmChanCnfgTable: cwaChanPrefRouteId cwaChanDirectRoute " REVISION "200203240000Z" DESCRIPTION "a) Added following objects in cwAtmChanCnfgTable: cwaChanSlaveType cwaChanRoutingPriority. b) Added following objects under cwAtmChanInformation: cwaChanNumVPCsInAlarm cwaChanNumVCCsInAlarm. c) Clarified the ifIndex usage in DESCRIPTION of cwAtmChanCnfgEntry. d) Updated the DESCRIPTION of following objects: cwaChanServiceCategory cwaChanVpcFlag cwaChanIdentifier cwaChanRowStatus e) Modified the range from 0..100 to 1..100 for following objects: cwaChanPercentUtil cwaChanRemotePercentUtil. f) Deprecated following objects: cwaChanAbrERS cwaChanAisIWCapability " REVISION "200102090000Z" DESCRIPTION "Update description for cwaChanVpcFlag, cwaChanStatsEnable, cwaChanRoutingMastership, and cwaChanAbrVSVDEnable" REVISION "200101030000Z" DESCRIPTION "Change description to indicate that cwaChanCDV, cwaChanCTD, cwaChanRemoteCDV, cwaChanRemoteCTD and cwaChanMaxCost parameters cannot be set on a slave endpoint." REVISION "200011150000Z" DESCRIPTION "Added cwaChanOamSegEpEnable object in cwAtmChanCnfgTable." REVISION "200007170000Z" DESCRIPTION "Deprecated object cwaChanRemoteCDVT" REVISION "200006190000Z" DESCRIPTION "Initial version of the MIB" ::= { ciscoWan 1 }
ciscoWanAtmConnMIB MODULE-IDENTITY LAST-UPDATED "200303300000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: [email protected]" DESCRIPTION "This MIB is used for configuring/provisioning SPVCs on the ATM interfaces. This is used for ATM switch connection management. Terminologies used: GCRA - The Generic Cell Rate Algorithm(GCRA) is used to define comformance with repect to the traffic contract.For each cell arrival, the GCRA determines whether the cell conforms to the traffic contract of the connection. PCR - The Peak Cell Rate(PCR) traffic parameter specifies an upper bound on the rate at which traffic can be submitted on an ATM connection. SCR - Sustained Cell Rate. MBS - Maximum Burst Size. MCR - Minimum Cell Rate is the rate at which the source is always allowed to send. ACR - Allowed Cell Rate is the current rate at which a source is allowed to send. RDF - Rate Decrease Factor controls the decrease in the cell transmission rate CRM - Missing RM-cell count. CRM limits the number of forward RM-cells which may be sent in the absence of received backward RM-cells. CDF - The Cutoff Decrease Factor controls the decrease in ACR assoicated with the CRM. CDVT - Cell Delay Transfer Variation Tolerance CBR - The Constant Bit Rate(CBR) service category is used by connections that request a static amount of bandwidth that is continuously available during the connection lifetime. This amount of bandwidth is characterized by a PCR value. rt-VBR - The real-time Variable Bit Rate(rt-VBR) service category is intended for real-time applications, i.e.,those requiring tightly constrainded delay and delay variation, as would be appropriate for voice and video applications.The rt-VBR connections are characterized in terms of a PCR, SCR and MBS. nrt-VBR - The non-real-time Variable Bit Rate(nrt-VBR) service category is intended for non-real-time applications which have bursty traffic characteristics. The nrt-VBR is characterized in terms of a PCR,SCR and MBS. UBR - The Unspecified Bit Rate(UBR) service category is intended for non-real-time applications,i.e.,those not requiring tightly constrained delay and delay variation. The UBR service does not specify traffic related service gurantees. The UBR service is indicated by use of the Best Effort Indicator in ATM User Cell Rate Information element. ABR - The Available Bit Rate(ABR) is an ATM layer service category for which the limiting ATM layer transfer characteristics provided by the network may change subsequent to connection establishment. CAC - The Connection Admission Control(CAC) function is defined as the set of actions taken by the network at SVC establishment or by network management during PVC establishment in order to determine whether a connection can be progressed or should be rejected. UPC - Usage Parameter Control(UPC) is defined as the set of actions taken by the network to monitor and control traffic. " REVISION "200303300000Z" DESCRIPTION "a) MAX-ACCESS clauses of objects in cwAtmChanTestTable are changed from read-create to read-write since this table does not have RowStaus object. " REVISION "200209180000Z" DESCRIPTION "a) Added following objects in cwAtmChanCnfgTable: cwaChanP2MP b) The DESCRIPTION of following objects are updated as a result of adding 'cwaChanP2MP' object: 'cwaChanRemoteVpi', 'cwaChanRemoteVci', 'cwaChanRemoteNSAPAddr', 'cwaChanRemotePCR', 'cwaChanRemoteMCR', 'cwaChanRemoteSCR', 'cwaChanRemoteCDV', 'cwaChanRemoteCTD', 'cwaChanRemoteMBS', 'cwaChanRemoteCDVT', 'cwaChanRemotePercentUtil', 'cwaChanRemoteCLR' and 'cwaChanSlaveType' c) Importing Unsigned32 from SNMPv2-SMI. d) Added 'cwGlobalChanDataTable' Table. e) Added following objects in cwAtmChanCnfgTable: cwaChanPrefRouteId cwaChanDirectRoute " REVISION "200203240000Z" DESCRIPTION "a) Added following objects in cwAtmChanCnfgTable: cwaChanSlaveType cwaChanRoutingPriority. b) Added following objects under cwAtmChanInformation: cwaChanNumVPCsInAlarm cwaChanNumVCCsInAlarm. c) Clarified the ifIndex usage in DESCRIPTION of cwAtmChanCnfgEntry. d) Updated the DESCRIPTION of following objects: cwaChanServiceCategory cwaChanVpcFlag cwaChanIdentifier cwaChanRowStatus e) Modified the range from 0..100 to 1..100 for following objects: cwaChanPercentUtil cwaChanRemotePercentUtil. f) Deprecated following objects: cwaChanAbrERS cwaChanAisIWCapability " REVISION "200102090000Z" DESCRIPTION "Update description for cwaChanVpcFlag, cwaChanStatsEnable, cwaChanRoutingMastership, and cwaChanAbrVSVDEnable" REVISION "200101030000Z" DESCRIPTION "Change description to indicate that cwaChanCDV, cwaChanCTD, cwaChanRemoteCDV, cwaChanRemoteCTD and cwaChanMaxCost parameters cannot be set on a slave endpoint." REVISION "200011150000Z" DESCRIPTION "Added cwaChanOamSegEpEnable object in cwAtmChanCnfgTable." REVISION "200007170000Z" DESCRIPTION "Deprecated object cwaChanRemoteCDVT" REVISION "200006190000Z" DESCRIPTION "Initial version of the MIB" ::= { ciscoWan 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.150.1.1 | cwConnMibObjects | 5 | 88 | None |
| 1.3.6.1.4.1.351.150.1.2 | ciscoWanAtmConnMIBConformance | 2 | 13 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.150.2 | ciscoWanAtmConnStatMIB | 3 | 155 | This module contains ATM switch connection related real time statistical counter objects. |
| 1.3.6.1.4.1.351.150.3 | ciscoWANSonetMIB | 2 | 106 | The MIB module to describe SONET/SDH interfaces objects. This is an extension to the standard SONET MIB(RFC 2558). |
| 1.3.6.1.4.1.351.150.5 | ciscoWanTrapVarsMIB | 2 | 51 | This MIB module is for Supporting Varbinds used only in trap defintions. The NMS applications should not depend on the implementa… |
| 1.3.6.1.4.1.351.150.7 | ciscoMGX8800IfMappingMIB | 2 | 13 | This MIB module is used for getting the ifIndex values given physical location and/or logical information. The physical informati… |
| 1.3.6.1.4.1.351.150.9 | ciscoWanRpmConnExtMIB | 2 | 19 | This MIB together with the CISCO-WAN-ATM-CONN-MIB support provisioning of PVC endpoints and SPVCs on the MGX's Route Processor Mo… |
| 1.3.6.1.4.1.351.150.10 | ciscoWanMgMIB | 2 | 85 | The MIB module for managing Media Gateways (MGs). Terms used: MG: Media Gateway MGC: Media Gateway Controller MGCP: Media Gatewa… |
| 1.3.6.1.4.1.351.150.11 | ciscoWanSrcpMIB | 2 | 51 | The MIB module for managing SRCP(Simple Resource Coordination Protocol) implementations. SRCP is a resource coordination protocol… |
| 1.3.6.1.4.1.351.150.15 | ciscoWanFeederMIB | 2 | 25 | This MIB is used for configuring a port on an ATM switch module to be aware of feeder connection information. Terminology: AR - Aut… |
| 1.3.6.1.4.1.351.150.16 | ciscoWanAtmCosbMIB | 2 | 29 | The MIB to manage CoS(Class of Service) queue/buffer related parameters. One or more virtual interfaces may exist on a physical in… |
| 1.3.6.1.4.1.351.150.17 | ciscoWanAal2ProfilesMIB | 2 | 17 | The MIB module for configuring AAL2 profile elements. This table will be used in AAL2 switching and trunking applications. |
| 1.3.6.1.4.1.351.150.18 | ciscoWanPersistentXgcpEventsMIB | 2 | 12 | The MIB module for managing CA(Call Agent) events. |
| 1.3.6.1.4.1.351.150.19 | ciscoWanT38FaxRelayMIB | 3 | 28 | The MIB module for configuring T.38 fax relay protocol parameters. This MIB will be used in VoIP(Voice over IP) applications. |
| 1.3.6.1.4.1.351.150.20 | ciscoWanRtpConnMIB | 3 | 46 | The MIB module is defined for establishing connection between an endpoint and another endpoint on a remote VISM in the case of Vo… |
| 1.3.6.1.4.1.351.150.21 | ciscoWanCodecGenParmMIB | 3 | 14 | This MIB provides configuration of Jitter buffer mode on a call and initial jitter delay value per Codec based. Prior to this, th… |
| 1.3.6.1.4.1.351.150.22 | ciscoWanMgcRedunMIB | 3 | 31 | The MIB module for Media Gateways (MGs) to allow multiple Media Gateway Controllers (MGCs) to be configured and managed on the Ga… |
| 1.3.6.1.4.1.351.150.23 | ciscoWanLapdTrunkMIB | 3 | 18 | The MIB module is defined for establishing a Trunk to transport PRI (Primary Rate Interface) signaling information over a RUDP (R… |
| 1.3.6.1.4.1.351.150.24 | vismTonePlanGrpMIB | 3 | 83 | The MIB module is defined to configure the programmable Tone Plan feature on VISM. |
| 1.3.6.1.4.1.351.150.25 | ciscoWanAnnouncementMIB | 3 | 31 | The MIB module is defined to configure the Announcements feature on the Media Gateway Card. The Media Gateway Card will have the … |
| 1.3.6.1.4.1.351.150.30 | ciscoWanSrmMIB | 1 | 6 | The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interf… |
| 1.3.6.1.4.1.351.150.31 | ciscoWanSrmBertMIB | 1 | 7 | The MIB Module for BERT(Bit Error Rate Testing) using Service Resource Module(SRM). This MIB module is used for BERT on FRSM, AUS… |
| 1.3.6.1.4.1.351.150.32 | ciscoWanBbifPortMIB | 1 | 8 | The MIB module for configuration of ATM logical ports in PXM1 Service module in MGX82xx series. This MIB contains information on … |
| 1.3.6.1.4.1.351.150.33 | ciscoWanBbifIlmiMIB | 1 | 6 | The MIB module for ILMI configuration and ILMI statistics for broad band interface ports in PXM1 service module. PXM1 service mod… |
| 1.3.6.1.4.1.351.150.35 | ciscoWanBbifAtmConnMIB | 1 | 7 | The MIB module to configure the ATM Connections on a broad band interface in PXM1 Service module. |
| 1.3.6.1.4.1.351.150.36 | ciscoWanBbifAtmConnStatMIB | 1 | 5 | This MIB module contains ATM Connection related real time statistical counter objects. The ATM connections are applicable to PXM1… |
| 1.3.6.1.4.1.351.150.38 | ciscoMgx82xxVirtualPortMIB | 1 | 8 | The MIB module for configuration ond reporting statistics of virtual ports in PXM1 Service module in MGX82xx series. |
| 1.3.6.1.4.1.351.150.39 | ciscoMgx82xxDsx3BertMIB | 1 | 5 | The MIB Module for BERT (Bit Error Rate Testing) on ds3 interfaces in some of the cards (Service Modules) in MGX products. This M… |
| 1.3.6.1.4.1.351.150.40 | ciscoWanCesPortMIB | 1 | 7 | The MIB module to configure the Circuit Emulation Service(CES) ports. |
| 1.3.6.1.4.1.351.150.41 | ciscoWanCesRsrcPartMIB | 1 | 5 | The mib module to configure the resource partition on Circuit Emulation Service(CES) ports. This is applicable for service module… |
| 1.3.6.1.4.1.351.150.42 | ciscoWanCesConnMIB | 1 | 7 | The MIB module to configure the Circuit Emulation connections in MGX82xx series products. Terminology: CES : Circui… |
| 1.3.6.1.4.1.351.150.43 | ciscoWanCesConnStatMIB | 1 | 6 | The MIB module to provide CES Connections statistics. This MIB is supported in Circuit Emulation Service Modules(CESM) in MGX82xx, … |
| 1.3.6.1.4.1.351.150.44 | ciscoWanFrPortMIB | 1 | 11 | The MIB module to create/configure frame relay ports/interfaces. This module contains tables related to frame relay port states a… |
| 1.3.6.1.4.1.351.150.45 | ciscoWanFrRsrcPartMIB | 1 | 5 | The MIB module to configure the resource partition on Frame Relay Ports. Terminlogies used: LCN : Logical Connection Number. DLCI … |
| 1.3.6.1.4.1.351.150.46 | ciscoWanFrSignalingMIB | 1 | 8 | The MIB module to configure LMI and CLLM on a frame relay ports. This mib module also contains objects to represent LMI and CLLM s… |
| 1.3.6.1.4.1.351.150.47 | ciscoWanFrConnMIB | 1 | 11 | The MIB module to configure the Frame Relay connection configuration. Terminologies Used: SIW - Frame-Relay-to ATM Service Interw… |
| 1.3.6.1.4.1.351.150.48 | ciscoWanFrConnStatMIB | 1 | 7 | The MIB module for frame relay connection statistics. Terminologies Used: SIW - Frame-Relay-to ATM Service Interworking FECN … |
| 1.3.6.1.4.1.351.150.49 | ciscoWanFrX21MIB | 1 | 8 | The MIB module to configure X.21/HSSI physical and logical interfaces. This MIB module also contains alarm configuration of X.21 i… |
| 1.3.6.1.4.1.351.150.58 | ciscoMgx82xxDsx1MIB | 1 | 9 | The MIB module to configure DS1/E1 interface objects. This mib also contains the alarm configuration of DS1/E1 interfaces. This m… |
| 1.3.6.1.4.1.351.150.59 | ciscoMgx82xxDsx3MIB | 1 | 19 | The MIB Module for DS3/E3 interface configuration , statistics and Alarm configuration. This MIB is supported in T3/E3 service mod… |
| 1.3.6.1.4.1.351.150.60 | ciscoMgx82xxRpmSubIfMIB | 1 | 5 | This MIB is used to provision backplane sub-interfaces on the MGX's Route Processor Module (RPM). This MIB is implemented on the… |
| 1.3.6.1.4.1.351.150.61 | ciscoMgx82xxRpmRsrcPartMIB | 1 | 5 | The MIB module to manage resource partition objects. A resource partition is configured on a RPM subinterface. An administrator c… |
| 1.3.6.1.4.1.351.150.62 | ciscoMgx82xxRpmConnMIB | 1 | 5 | The connection MIB module for RPM(Router Blade) service module in MGX8250/MGX8230 products. The 'channel' and 'connection' and 'c… |
| 1.3.6.1.4.1.351.150.63 | ciscoWanParMIB | 1 | 15 | The MIB module for configuring AutoRoute controller. The Portable AutoRoute(PAR) is a Controller providing routing capabilities i… |
| 1.3.6.1.4.1.351.150.67 | basisMIB | 0 | 0 | This MIB Contains OID subtrees used in some of the MIBs under 'stratacom' enterprise. |
| 1.3.6.1.4.1.351.150.69 | basisSerialMIB | 1 | 5 | The MIB module to configure serial ports in Processor Module and different Service Modules(cards) in MGX8850,MGX8250 and MGX8220 A… |
| 1.3.6.1.4.1.351.150.70 | ciscoMgx82xxEnvmonMIB | 1 | 6 | The MIB module to describe the status of the Environmental Monitoring devices in MGX82xx products. |
| 1.3.6.1.4.1.351.150.71 | ciscoMgx82xxAtmUniPortMIB | 1 | 6 | The MIB module containing objects related to user-side of the ATM UNI Port. The mib is applicable for MGX8250 and MGX8220 product… |
| 1.3.6.1.4.1.351.150.72 | ciscoMgx82xxPxmClockMIB | 1 | 8 | The MIB module to describe the clock configuration in Processor Switch Module(PXM) in MGX82xx product. Back cards supported for … |
| 1.3.6.1.4.1.351.150.73 | ciscoMgx82xxModuleRsrcPartMIB | 1 | 5 | The MIB module to configure the resource partition on service modules(cards) supported in MGX82xx and MGX88xx products. This MIB i… |
| 1.3.6.1.4.1.351.150.74 | ciscoMgx82xxCardFeatureMIB | 1 | 7 | The MIB module which describes the features supported in MGX82XX products. This MIB Module provides the features supported in Cont… |
| 1.3.6.1.4.1.351.150.79 | ciscoVismDsx1MIB | 1 | 18 | The MIB module to configure DS1/E1 interface objects in a Voice Interworking Service Module (VISM) module. This MIB is an extensi… |
| 1.3.6.1.4.1.351.150.80 | basisOnlineDiagMIB | 1 | 5 | This MIB contains information on the online diagnostics in MGX82xx(MGX8250, MGX8220, MGX8230 etc) products. |
| 1.3.6.1.4.1.351.150.81 | ciscoVismDsx0MIB | 1 | 12 | This MIB module contains ds0 configuration, Status and DS0 related information on a DS1 interface supported in VISM module. VISM i… |
| 1.3.6.1.4.1.351.150.82 | ciscoVismModuleMIB | 1 | 26 | This MIB module contains VISM Card specific attributes and call statistics information for VISM service module. |
| 1.3.6.1.4.1.351.150.86 | ciscoVismConnMIB | 1 | 8 | The MIB module to contains configuration and connection state information the VISM. For VoIP(Voice over IP) support, VISM needs o… |
| 1.3.6.1.4.1.351.150.87 | ciscoVismAtmTrunkMIB | 1 | 10 | The MIB module contain the Bearer and CID (Channel Identifier) connection information. |
| 1.3.6.1.4.1.351.150.88 | ciscoVismCasMIB | 1 | 7 | The MIB module contain the CAS backhaul feature in VISM |
| 1.3.6.1.4.1.351.150.89 | ciscoVismConnStatMIB | 1 | 11 | The MIB module contain VISM channel counters information. |
| 1.3.6.1.4.1.351.150.90 | ciscoVismSvcMIB | 1 | 8 | The MIB module containing SVC information for VISM service module. |
| 1.3.6.1.4.1.351.150.91 | ciscoVismHdlcMIB | 1 | 6 | The MIB module containing table for configurating and maintaining counters for the HDLC channel on VISM service module. |
| 1.3.6.1.4.1.351.150.92 | ciscoVismPortMIB | 1 | 5 | The MIB module containing Port information for VISM service module. |
| 1.3.6.1.4.1.351.150.93 | ciscoVismRsrcPartMIB | 1 | 5 | The MIB module containing Port Resource Partition information for VISM service module. |
| 1.3.6.1.4.1.351.150.94 | ciscoVismXgcpExtMIB | 1 | 8 | The MIB module contain the XGCP MIB feature in VISM |
| 1.3.6.1.4.1.351.150.95 | ciscoVismSessionMIB | 1 | 8 | The MIB module contain the RUDP session parameter. The relationship between session set, session group and RUDP session is that: … |
| 1.3.6.1.4.1.351.150.96 | ciscoVismCacMIB | 1 | 6 | The MIB module containing the CAC information for VISM service module. |
| 1.3.6.1.4.1.351.150.97 | ciscoVismCodecMIB | 1 | 8 | The MIB module contains tables for configurating and maintaining Codec on VISM service module. |